Groundwater recharge in arid areas induced by tropical cyclones: lessons learned from Gonu 2007 in Sultanate of Oman

Younger groundwater found in some Omani aquifers is a result of recent recharge from cyclonic and storm events [Weyhenmeyer et al. (Science 287:842–845, 2000); Young et al. (J Appl Geophys 57:43–61, 2004)]. The analysis of the meteorological data in Oman indicates an anomalous rainfall on a decadal interval whereas cyclones frequency is expected to increase due to global climatic changes. The cyclone Gonu has severely struck the eastern Omani coasts in 2007 resulting in devastating floods. Huge volume of water (3,672 mm³) spread over the coastal plain calling for an assessment of potential groundwater recharge subsequent to this event. The present study evaluates groundwater recharge with respect to Gonu 2007 to assess the potential of recharge induced by such cyclones in the arid zones. The hydrographs of several piezometers sited along the coastal plain in Muscat Province have been studied and variation in water table rise has been analyzed. Significant water table rise is indicated for areas with geological and structural settings favoring rapid infiltration of water yielding considerable groundwater mound, whereas piezometers located in less favorable zones show minimum rise of water table. However, soon after the floods the aquifer hydrodynamics has readjusted to attain equilibrium and the groundwater mound dissipated. The cumulative rise of the water table on an areal extent does not exceed a few centimeters indicating lesser volume of recharge. Comparatively, recharge from frequent precipitation along favorable zones produces more significant recharge compared with cyclonic events where surface water residence time is shorter to allow for efficient infiltration.     

The Tau Model for Data Redundancy and Information Combination in Earth Sciences: Theory and Application

Many decision-making processes in the Earth sciences require the combination of multiple data originating from diverse sources. These data are often indirect and uncertain, and their combination would call for a probabilistic approach. These data are also partially redundant with each other or with all others taken jointly. This overlap in information arises due to a variety of reasons—because the data arises from the same geology, because they originate from the same location or the same measurement device, etc. The proposed tau model combines partially redundant data, each taking the form of a prior probability for the event being assessed to occur given that single datum. The parameters of that tau model measure the additional contribution brought by any single datum over that of all previously considered data; they are data sequence-dependent and also data value-dependent. Data redundancy depends on the sequence in which the data is considered and also on the data values themselves. However, for a given sequence, averaging the tau model parameters over all possible data values leads to exact analytical expressions and corresponding approximations and inference avenues. Information on multiple-point connectivity of permeability arrives from core data, well-test data and seismic data which are defined over varying supports with complex redundancy between these information sources. In order to compute these tau weights for determining connectivity, one needs a model of data redundancy, here expressed as a vectorial training image (Ti) constructed using a prior conceptual knowledge of geology and the physics of data measurement. From such a vectorial Ti, the tau weights can be computed exactly. Neglecting data redundancy leads to an over-compounding of individual data information and the possible risk of making extreme decisions.     

Progress in Environmental Evolvement and Environmental Archaeology Study in the Yangtze Delta （China）

A review was conducted on the environmental evolvement and environmental archaeological research since the 1980s in the Yangtze Delta. Former environmental evolvement and environmental archaeological research results can be summed up into 4 aspects： 1） Formation and evolution of the Taihu Lake; 2） Transgression and sea-level changes in the Holocene epoch; 3） Reconstruction of the pre-historical environment; and 4） Impacts of environmental variations on the rise and fall of human civilization （formation of the cultural interruptions）. Based on this review, some limitations in the present research methods and possible outcomes are pointed out in this paper.     

New Damage-locating Method for Bridges Subjected to a Moving Load

A new damage-locating method for bridges subjected to a moving load is presented, and a new ‘moving load damage-locating indicator＇ （MLDI） is introduced. A vehicle is modeled as a moving load, the bridge is simplified as an Euler-Bernoulli beam, and the damage is simulated by a reduction of stiffness properties of the elements. The curvature and MLDI values at each node of the baseline model （undamaged） and the damage model are computed respectively. Then the damage or damages can be located from a sudden change of the MLDI value. The feasibility and effectiveness of the proposed method are validated by numerical simulation. The results indicate that the method is effective, being able to not only locate a single damage accurately, but also locate multiple damages in simply-supported bridges, including multiple damages in continuous bridges. The results also indicate that the MLDI can accurately locate damages under 5% measurement noise.     

The Moon

Recent geochemical and geophysical data from the Moon enable a revision of earlier interpretations regarding lunar origin, structure and bulk composition. Earth and Moon show many similarities among their isotopic compositions, but they have evolved in totally dissimilar ways, probably related to the deficiency of water and volatile elements in the Moon as well as the vast differences in size and internal pressure. Some global geochemical differences from the Earth such as volatile depletion based on K/U ratios have been established. However, all current lunar samples come from differentiated regions, making the establishment of a bulk composition more reliant on bulk geophysical properties or isotopic similarities; it remains unclear how the latter arose or relate to whole Moon composition. The lack of fractionation effects among the refractory and super-refractory elements indicates that the proto-lunar material seems unlikely to have been vaporized while the presence of volatile elements may place lower limits on proto-lunar temperatures. The apparent lack of geochemical evidence of an impacting body enables other possible impactors, such as comets, to be considered. Although the origin of the Moon remains currently unknown, it is generally believed that the Moon originated as the result of a giant impact on the Earth.     

Gravity anomaly interpretation of 2D fault morphologies by means of nonplanar fault planes and exponential density contrast model: a space domain technique

Boundary faults associated with thick sedimentary basins are more often curved in cross section rather than planar. We develop a space domain-based automatic gravity inversion technique to quantify such listric fault sources from a set of observed gravity anomalies. The density contrast within the hanging wall of fault morphology is presumed to be known according to a prescribed exponential law. Furthermore, the fault plane is described by a polynomial function of arbitrary but specific degree, whose coefficients become the unknown parameters to be estimated from a set of observed gravity anomalies in addition to the thickness of the fault structure. Using a set of characteristic anomalies, the present inversion identifies approximate parameters pertaining to the origin of fault plane and depth to decollement horizon. Based on the errors between the observed and model gravity anomalies of the structure, the algorithm constructs and solves a system of normal equations to estimate the improvements in depth and coefficients of the polynomial in an iterative approach until one of the specified convergence criteria is fulfilled. The efficacy of the algorithm is shown with the analysis of gravity anomalies attributable to a synthetic model of a listric fault source in the presence of pseudorandom noise. Application of the proposed inversion technique on the observed gravity anomalies of the Ahri-Cherla master fault of the Godavari subbasin in India using the derived exponential density contrast model has yielded an interpretation that is consistent with the available/reported information.     

Raman spectra of methane hydrate up to 86 GPa

High-pressure Raman studies of methane hydrate were performed using a diamond anvil cell in the pressure range of 0.1–86 GPa at room temperature. Raman spectra of the methane molecules revealed that new softened intramolecular vibration mode of ν ₁ appeared at 17 GPa and that the splitting of vibration mode of ν ₃ occurred at 15 GPa. The appearance of these two modes indicates that an intermolecular attractive interaction increases between the methane molecules and the host water molecules and between the neighboring methane molecules. These interactions might result in the exceptional stability of a high-pressure structure, a filled ice Ih structure (FIIhS) for methane hydrate, up to 40 GPa. At 40 GPa, a clear change in the slope of the Raman shift versus pressure occurred, and above 40 GPa the Raman shift of the vibration modes increased monotonously up to 86 GPa. A previous XRD study showed that the FIIhS transformed into another new high-pressure structure at 40 GPa. The change in the Raman spectra at 40 GPa may be induced by the transition of the structure.     

Roughness control on hydraulic conductivity in fractured rocks

The influence of joint roughness on the typologies of fluid flow inside fractures is well known and, thanks to experiences in the field of hydraulics, it has been studied from both a physical and mathematical point of view. Nevertheless, the formulations adopted by traditional hydraulic models are hardly applicable in the geological field, because of the difficulty encountered in the roughness parameter estimation. Normally this parameter can be estimated using the joint roughness coefficient (JRC), which considers both the asperity height and its regularity and directional trend. The main advantage in using the JRC arises from the fact that it can easily be obtained from geological-technical surveys and from comparison with the standard Barton profiles. Some relationships have been built up that allow for the estimation of the hydraulic conductivity tensor (an essential parameter for understanding water flow in fractured rock masses), not only as a function of traditional parameters like aperture, spacing, dip and dip direction, etc., but also of joint roughness, precisely expressed in terms of the roughness coefficient. These relationships have been studied initially from a theoretical point of view and then practically, through laboratory investigations.

---

Resumen  Se conoce muy bien la influencia de la rugosidad de las grietas en las tipologías del flujo de fluidos a lo interior de las fracturas y gracias a las experiencias en el campo de hidráulica ha sido posible estudiarla desde puntos de vista matemáticos y físicos. Sin embargo, las formulaciones adoptadas por los modelos hidráulicos tradicionales tienen poca aplicabilidad en el campo geológico debido a la dificultad relacionada con la estimación del parámetro de rugosidad. Normalmente este parámetro puede estimarse usando el coeficiente de rugosidad de grieta (JRC) el cual considera tanto la altura de la aspereza como su regularidad y tendencia direccional. La principal ventaja de utilizar el JRC se deriva del hecho que puede obtenerse fácilmente de levantamientos técnico-geológicos y de la comparación con los perfiles Standard Barton. Se han construido algunas relaciones que permiten la estimación del tensor de conductividad hidráulica (un parámetro esencial para el entendimiento del flujo de agua en masas de roca fracturadas), no solo en función de parámetros tradicionales como apertura, espaciado, buzamiento y dirección de buzamiento, etc., sino también en función de la rugosidad de la grieta estimada con precisión en términos del coeficiente de rugosidad. Estas relaciones se han estudiado inicialmente desde un punto de vista teórico y luego de modo práctico a través de investigaciones de laboratorio.

---

Résumé  L’influence de la rugosité des joints sur les types d’écoulement de fluide dans les fractures est bien connue et a été étudiée aussi bien du point de vue physique que mathématique grace à des expériences menées dans le domaine de l’hydraulique. Cependant les formulations adoptées dans les modèles hydrauliques traditionnels sont difficilement applicables dans le domaine de la géologie à cause de la difficulté rencontrée pour estimer la rugosité. Ce paramètre peut normalement être apprécié grace au coefficient de rugosité du joint (JRC), lequel prend en compte à la fois la hauteur de l’aspérité ainsi que sa régularité et sa direction. Le principal avantage dans l’utilisation du JRC réside dans le fait qu’il peut facilement être obtenu à partir d’études techniques-géologiques et par comparaison avec la classification de Barton. Des relations qui permettent une estimation du tenseur de conductivité hydraulique (un paramètre essentiel pour comprendre l’écoulement de l’eau dans les masses rocheuses fracturées) ont été élaborées, pas seulement en fonction de paramètres traditionnels tels que l’ouverture, l’espacement, l’inclinaison et la direction d’inclinaison, etc , mais aussi en prenant en compte la rugosité des joints à travers le coefficient de rugosité. Ces relations ont initialement été étudiées d’un point de vue théorique puis expérimentalement à travers des recherches en laboratoire.