Response of microbial community to petroleum stress and phosphate dosage in sediments of Jiaozhou Bay,China

The dynamic microcosms were used to evaluate the effect of oil spills on microbial ecological system in marine sediment and the enhancement of nutrient on the oil removal. The function and structure of microbial community caused by the oil pollution and phosphate dosage were simultaneously monitored by dehydrogenase activity assay and PCR-denaturing gradient gel electrophoresis (DGGE) techniques. The results indicated that the amount of total bacteria in all dynamic microcosms declined rapidly with incubation time. The number of petroleum-degrading bacteria and the activity of sediment dehydrogenase were gradually enhanced by petroleum in the oil-treated microcosms, while they both showed no obvious response to phosphate dosage. In comparison, phosphate spiked heterotrophic bacteria and they showed a significant increase in amount. DGGE profiles indicated that petroleum dosage greatly changed community structure, and the bacteria belonged to class Deltaproteobacteria, and phyla Bacteroidetes and Chlorobi were enriched. This study demonstrated that petroleum input greatly impacted the microbial community structure and consequently the marine sediment petroleum-degrading activity was enhanced. Phosphate dosage would multiply heterotrophic bacteria but not significantly enhance the petroleum degradation.     

Passive earth pressure on embedded vertical plate anchors in sand

Passive earth pressure on embedded anchor plates constitutes a viable resisting force for the design of underground structures. In the current practice, these forces are empirically calculated, ignoring the effects of the depth of embedment and the level of consolidation of the surrounding soil, which takes place during plate installation on the in situ stress levels. Accordingly, wide discrepancies between predicted and measured pullout capacities of these plates were reported in the literature. Numerical model was developed using finite-element technique and the constitutive law of Mohr?CCoulomb to simulate the case of a retaining wall partially supported by an embedded anchor plate in sand. The results produced in this investigation showed that the passive earth pressure acting on anchor plates increases due to the increase of angle of shearing resistance and the overconsolidation ratio of sand, and it decreases due to an increase of the embedment depth of anchor. Design theories were developed for the case of embedded anchor plate in overconsolidated sand. The theories developed will satisfy the design needed in terms of allowable pullout load and/or displacement.     

Advanced performance in geotechnical engineering using tomography analysis

This paper presents the technique to demonstrate reliable two-dimensional (2-D) tomography of near-surface soil through multichannel analysis of surface wave (MASW) method. The MASW method is used as seismic method for determining the shear wave velocity profile of near-surface soil with better performance. Normally, this method represents one-dimensional (1-D) soil layer profile to delineate anomalous subsurface materials and detect soil characteristics in geotechnical investigations. Conventionally, the MASW method is able to represent depth corresponding shear wave velocity through 1-D representation. In this paper, this method is improved through representation of depth and distance versus shear wave velocity profile using 2-D tomography analysis in geotechnical investigations. The outcomes of the newly developed method are more reliable and informative in comparison to the outcome of the conventional MASW method. The significance of this research is incorporating advanced tomography technique with MASW method to obtain 2-D tomography of geotechnical characteristics with consistency.     

Social capital, community based management, and fishers’ livelihood in Bangladesh

This paper examines the impact of Community Based Fisheries Management (CBFM) on fishing households’ welfare in Bangladesh. It analyses how the various types of livelihood assets contribute to fishers’ household incomes. The study found that fishers in CBFM project areas have improved their access to different assets including social, human, physical, financial and natural capitals. The regression results show that social capital contributed significantly to household income, indicating that social factors play very important roles in poverty alleviation in Bangladesh. Future poverty alleviation policy options need to give priority to investments in human, physical and natural capital assets.     

Fuzzy logic based melting layer recognition from 3 GHz dual polarization radar: appraisal with NWP model and radio sounding observations

The advent of polarimetry makes it possible to categorize hydrometeor inferences more accurately by providing detailed information of the scattering properties. In light of this, the authors have developed a fuzzy logic based system for the recognition of melting layer in the atmosphere. The fuzzy system is based on characterizing melting layer scatterers from non-melting scatterers using five crisp inputs, namely, horizontal reflectivity (Z _H), differential reflectivity (Z _DR), co-polar correlation coefficient (ρ _HV), linear depolarization ratio (LDR) and height of radar measurements (H). For the implementation of melting layer recognition, the study employs the dual polarized signatures from the 3 GHz Chilbolton Advanced Meteorological Radar (CAMRA). Furthermore, a simple but effective averaging procedure for melting level estimation from a volume RHI scan is proposed. The proposed scheme has been evaluated with Weather Research and Forecasting (WRF) model simulated and radio soundings retrieved melting level height over a total of 84 RHI scan-based bright band cases. The results confirm that the estimated melting level heights from the proposed method are in good agreement with the WRF model and radio sounding observations. The 3 GHz radar melting level height estimates correspond with the R ² and RMSE values of 0.92 and 0.24 km, respectively, when compared to the radio soundings, and 0.93 and 0.21 km, respectively, when compared to the WRF model results. Moreover, the related R ² and RMSE values are reported as 0.93 and 0.22 km respectively between the WRF and radio soundings retrievals. This implies that the downscaled WRF modelled melting level height may also be used for operational or research needs.     

Analysis of radio astronomy bands using CALLISTO spectrometer at Malaysia-UKM station

The e-CALLISTO system is a worldwide network that aims to observe solar radio emission for astronomical science. CALLISTO instruments have been deployed worldwide in various locations that together can provide continuous observation of the solar radio spectrum for 24 h per day year-round. Malaysia-UKM is a strategic equatorial location and can observe the Sun 12 h per day. This paper gives an overview of the spectrum allocation for radio astronomy, which falls in the specified operating frequency band of the CALLISTO spectrometer. The radio astronomy bands are analyzed at the Malaysia-UKM station according to the International Telecommunication Union recommendations. Some observational results are also presented in this paper.     

Hydrochemistry in coastal aquifer of southwest Bangladesh: origin of salinity

In the coastal region of Bangladesh, groundwater is mainly used for domestic and agricultural purposes, but salinization of many groundwater resources limits its suitability for human consumption and practical application. This paper reports the results of a study that has mapped the salinity distribution in different aquifer layers up to a depth of 300 m in a region bordering the Bay of Bengal based on the main hydrochemistry and has investigated the origin of the salinity using Cl/Br ratios of the samples. The subsurface consists of a sequence of deltaic sediments with an alternation of more sandy and clayey sections in which several aquifer layers can be recognized. The main hydrochemistry shows different main water types in the different aquifers, indicating varying stages of freshening or salinization processes. The most freshwater, soft NaHCO₃-type water with Cl concentrations mostly below 100 mg/l, is found in the deepest aquifer at 200–300 m below ground level (b.g.l.), in which the fresh/saltwater interface is pushed far to the south. Salinity is a main problem in the shallow aquifer systems, where Cl concentrations rise to nearly 8000 mg/l and the groundwater is mostly brackish NaCl water. Investigation of the Cl/Br ratios has shown that the source of the salinity in the deep aquifer is mixing with old connate seawater and that the saline waters in the more shallow aquifers do not originate from old connate water or direct seawater intrusion, but are derived from the dissolution of evaporite salts. These must have been formed in a tidal flat under influence of a strong seasonal precipitation pattern. Long dry seasons with high evaporation rates have evaporated seawater from inundated gullies and depressions, leading to salt precipitation, while subsequent heavy monsoon rains have dissolved the formed salts, and the solution has infiltrated in the subsoil, recharging groundwater.     

Hydrocarbon source potential and depositional environment of the Surma Group shales of Bengal basin,Bangladesh

Surma Group is the most important geological unit of Bengal basin, Bangladesh, because petroleum resources occur within this group. It is mainly composed of alternation of shale and sandstone and the shale fraction has long been considered as source rocks and the sandstone fraction as reservoir. These source and reservoir rocks have been studied by different authors by different approach but none of them adopted organic geochemistry and organic petrology as a means of study of source rock and their possible depositional environment. A total of thirty shale core samples have been collected from eight different gas fields to fulfill the short coming. The collected samples have been subjected to Source Rock Analysis (SRA) and/or Rock-Eval (RE) followed by pyrolysis gas chromatography (PyGC), gas chromatography mass spectrometry (GCMS), elemental analysis (EA) and organic petrological study such as vitrinite reflectance measurement and maceral analysis. The analyzed organic matter extracted from the shales of Surma Group consists mainly of Type III along with some Type II kerogen. The studied shales are mostly organically lean (TOC ±1%) and the extracted organic matter is fair to moderate. Based on these results, the analyzed shales have been ranked as poor (mostly) to fair quality source rock. The organic matter of the analyzed shale samples is thermally immature to early mature for hydrocarbon generation considering their T_max and measured mean vitrinite reflectance values. The hopane 22S/(22S + 22R), moretane/hopane ratio and sterane parameters are also in good agreement with these thermal maturity assessments. The predominance of odd carbons over even carbons (most common) and/or even carbons over odd carbon numbered n-alkanes, moderate Pr/Ph ratio, low to high Tm/Ts ratio, comparative abundance of sterane C₂₉ (i.e., C₂₉ >C₂₇>C₂₈), Pr/nC₁₇ — Ph/nC₁₈ values, C/S ratio and dominance of vitrinite macerals group with the presence of liptinite macerals demonstrate that the organic matter has derived mainly from terrestrial inputs with an insignificant contribution from the marine sources. The condition of deposition alternates from oxic to anoxic.     

Palaeoweathering characteristics of an intrabasaltic red bole of the Deccan Flood Basalts near Shrivardhan of western coast of India

An intrabasaltic red bole horizon is studied for its weathering characteristics with respect to the underlying and overlying basalts. The study indicates that all the three units have been considerably weathered; the red bole unit, however shows some distinctive characteristics. The red boles show a higher cation exchange capacity (CEC) and lower sodium adsorption ratio (SAR) and organic carbon (OC) as compared to the weathered basalts. The lower values of Al₂O₃, TiO₂ and Fe₂O₃(T) in red boles indicate their lesser weathering than the underlying and overlying basalts, which is further corroborated by the weathering intensity measured by the indices like chemical index of alteration (CIA) and statistical empirical index of chemical weathering (W). It is also evident that the red bole samples show more retention of original mafic and felsic components. While K₂O exhibits an erratic behaviour, the MgO and CaO do not show much leaching in red boles. Lesser leaching and salinity in the red boles is indicated by the higher values of calcification and lower values of salinization. The SiO₂–Al₂O₃–Fe₂O₃ plot indicates that red bole samples are close to the basalt field, while the weathered upper basalt is more kaolinized than the weathered lower basalt. These observations reveal that the post-formational weathering processes have least affected the original palaeoweathering characters of the red bole horizon and hence the intrabasaltic palaeosols (weathering horizons) can effectively be used to constrain the palaeoweathering and palaeoclimates during the continental flood basalt episodes in the geologic past.