Parallelization of the distinct lattice spring model

The distinct lattice spring model (DLSM) is a newly developed numerical tool for modeling rock dynamics problems, i.e. dynamic failure and wave propagation. In this paper, parallelization of DLSM is presented. With the development of parallel computing technologies in both hardware and software, parallelization of a code is becoming easier than before. There are many available choices now. In this paper, Open Multi‐Processing (OpenMP) with multicore personal computer (PC) and message passing interface (MPI) with cluster are selected as the environments to parallelize DLSM. Performances of these parallel DLSM codes are tested on different computers. It is found that the parallel DLSM code with OpenMP can reach a maximum speed‐up of 4.68× on a quad‐core PC. The parallel DLSM code with MPI can achieve a speed‐up of 40.886× when 256 CPUs are used on a cluster. At the end of this paper, a high‐resolution model with four million particles, which is too big to handle by the serial code, is simulated by using the parallel DLSM code on a cluster. It is concluded that the parallelization of DLSM is successful. Copyright © 2011 John Wiley & Sons, Ltd.     

Computational homogenization of uncoupled consolidation in micro‐heterogeneous porous media

Variationally consistent homogenization is exploited for the analysis of transient uncoupled consolidation in micro‐heterogeneous porous solids, whereby the classical approach of first‐order homogenization for stationary problems is extended to transient problems. Homogenization is then carried out in the spatial domain on representative volume elements (RVE), which are introduced in quadrature points in standard fashion. Along with the classical averages, a higher‐order conservation quantity is obtained. An iterative FE²‐algorithm is devised for the case of nonlinear permeability and storage coefficients, and it is applied to pore pressure changes in asphalt‐concrete (particle composite). Various parametric studies are carried out, in particular, with respect to the influence of the ‘substructure length scale’ that is represented by the size of the RVE's. Copyright © 2009 John Wiley & Sons, Ltd.     

Discrete wavelet‐based trend identification in hydrologic time series

Trend identification is a substantial issue in hydrologic series analysis, but it is also a difficult task in practice due to the confusing concept of trend and disadvantages of methods. In this article, an improved definition of trend was given as follows: ‘a trend is the deterministic component in the analysed data and corresponds to the biggest temporal scale on the condition of giving the concerned temporal scale’. It emphasizes the intrinsic and deterministic properties of trend, can clearly distinguish trend from periodicities and points out the prerequisite of the concerned temporal scale only by giving which the trend has its specific meaning. Correspondingly, the discrete wavelet‐based method for trend identification was improved. Differing from those methods used presently, the improved method is to identify trend by comparing the energy difference between hydrologic data and noise, and it can simultaneously separate periodicities and noise. Furthermore, the improved method can quantitatively estimate the statistical significance of the identified trend by using proper confidence interval. Analyses of both synthetic and observed series indicated the identical power of the improved method as the Mann–Kendall test in assessing the statistical significance of the trend in hydrologic data, and by using the former, the identified trend can adaptively reflect the nonlinear and nonstationary variability of hydrologic data. Besides, the results also showed the influences of three key factors (wavelet choice, decomposition level choice and noise content) on discrete wavelet‐based trend identification; hence, they should be carefully considered in practice. Copyright © 2012 John Wiley & Sons, Ltd.     

Seasonal temperature extremes in Potsdam

The awareness of global warming is well established and results from the observations made on thousands of stations. This paper complements the large-scale results by examining a long time-series of high-quality temperature data from the Secular Meteorological Station in Potsdam, where observation records over the last 117 years, i.e., from January 1893 are available. Tendencies of change in seasonal temperature-related climate extremes are demonstrated. “Cold” extremes have become less frequent and less severe than in the past, while “warm” extremes have become more frequent and more severe. Moreover, the interval of the occurrence of frost has been decreasing, while the interval of the occurrence of hot days has been increasing. However, many changes are not statistically significant, since the variability of temperature indices at the Potsdam station has been very strong.     

GIS-based assessment of landslide susceptibility on the base of the Weights-of-Evidence model

The major scope of the study is the assessment of landslide susceptibility of Flysch areas including the Penninic Klippen in the Vienna Forest (Lower Austria) by means of Geographical Information System (GIS)-based modelling. A statistical/probabilistic method, referred to as Weights-of-Evidence (WofE), is applied in a GIS environment in order to derive quantitative spatial information on the predisposition to landslides. While previous research in this area concentrated on local geomorphological, pedological and slope stability analyses, the present study is carried out at a regional level. The results of the modelling emphasise the relevance of clay shale zones within the Flysch formations for the occurrence of landslides. Moreover, the distribution of mass movements is closely connected to the fault system and nappe boundaries. An increased frequency of landslides is observed in the proximity to drainage lines, which can change to torrential conditions after heavy rainfall. Furthermore, landslide susceptibility is enhanced on N-W facing slopes, which are exposed to the prevailing direction of wind and rainfall. Both of the latter geofactors indirectly show the major importance of the hydrological conditions, in particular, of precipitation and surface runoff, for the occurrence of mass movements in the study area. Model performance was checked with an independent validation set of landslides, which are not used in the model. An area of 15% of the susceptibility map, classified as highly susceptible, “predicted” 40% of the landslides.     

Modeling the effects of riparian planting strategies on stream temperature: Increasing suitable habitat for endangered Formosan Landlocked Salmon in Shei‐Pa National Park,Taiwan

Reducing or stabilizing the stream temperature of ChiChiaWan Creek is a crucial work for Formosan Landlocked Salmon because ChiChiaWan Creek is the only one habitat for this endangered species. Planting trees in the riparian zone would be one of the alternatives. The purpose of this study was to evaluate the effects of several planting strategies on daily maximum stream temperature along the river. The results showed the effective vegetative shading angles should be more than 50° along ChiChiaWan Creek to reduce the direct solar radiation heating effectively. Upstream planting with 70° vegetative shading angle could be the most effective way among all the scenarios. However, this planting strategy could not improve the worst situations in summer because of the large solar elevation angles. The upstream planting in ChiChiaWan Creek was strongly recommended because the canopies could be easier to extend to totally cover the narrow width of river producing the most effective shades. Practicing the upstream planting with 90° vegetative shading angle can increase more than 1 km long suitable habitats for the endangered Salmon in summer. Alternatively, the west‐side planting scenario was the second effective way for temperature reduction. Our result provided a useful suggestion for the authorities in charge of saving the Formosan Landlocked Salmon, particularly under the stress of global warming. Copyright © 2011 John Wiley & Sons, Ltd.     

利用U—1000型激光拉曼探针测定流体包裹体气体成分的研究

本文利用U－1000型激光拉曼探针成功地测量出单个流体包裹体中H2S、CH4、CO2气体成分，并讨论了包裹体中这些气体的拉曼谱峰位移与包裹体内压的关系，分析了影响激光拉曼探针定量测定包裹体气相成分的取面积和拉曼定量因子因素。     

环境水利学在中国的兴起与发展

本文阐述了环境水利学的定义与内容,提出了环境水利学的五大任务,并根据每一个任务分别说明了在中国的发展情况。最后。提出了如何发展这一学科的一些设想.     

The vascular flora of the Qomolangma-Xixabangma region,Tibet

According to the classification and statistics of the specimens collected in the Xixabangma-Qomolangma region there are a total of 1624 species of vascular plants (136 families, 573 genera). Based on the statistics of the 573 genera of vascular plants, 14 distribution types are derived (Cosmopolitans, pantropical, tropical asian-american, palaeotropical, indo-malayan, north-temperate, east-asian-north-american disjunctions, temperate asian, central asian, tethys elements, endemic etc.). The origin of the flora of the area under consideration is polygenetic. There is no endemic family, but there are 14 endemic genera and 240 endemic species. The majority of the endemic species are derived from large and polytypic genera. The group of endemic species and varieties show that the flora of Xixabangma-Qomolangma is young and under violent floristic differentiation.