On the nature of the z=0 X-ray absorbers: I. Clues from an external group

We describe the main features of the evolutionary code ATON 3.1 and its latest version, particularly deviced to be apt for follow up asteroseismology applications. An older version of the code including rotational evolution is also shortly described.     

Interplay of S and As in Mekong Delta sediments during redox oscillations

The cumulative effects of periodic redox cycling on the mobility of As,Fe,and S from alluvial sediment to groundwater were investigated in bioreactor experiments.Two particular sediments from the alluvial floodplain of the Mekong Delta River were investigated:Matrix A(14 m deep)had a higher pyrite concentration than matrix B(7 m deep)sediments.Gypsum was present in matrix B but absent in matrix A.In the reactors,the sediment suspensions were supplemented with As(Ⅲ)and SO_4~(2-),and were subjected to three full-redox cycles entailing phases of nitrogen/CO_2,compressed air sparging,and cellobiose addition.Major differences in As concentration and speciation were observed upon redox cycling.Evidences support the fact that initial sediment composition is the main factor controlling arsenic release and its speciation during the redox cycles.Indeed,a high pyrite content associated with a low SO_4~(2-)content resulted in an increase in dissolved As concentrations,mainly in the form of As(Ⅲ),after anoxic half-cycles;whereas a decrease in As concentrations mainly in the form of As(Ⅴ),was instead observed after oxic half-cycles.In addition,oxic conditions were found to be responsible for pyrite and arsenian pyrite oxidation,increasing the As pool available for mobilization.The same processes seem to occur in sediment with the presence of gypsum,but,in this case,dissolved As were sequestered by biotic or abiotic redox reactions occurring in the Fe—S system,and by specific physico-chemical condition(e.g.pH).The contrasting results obtained for two sediments sampled from the same core show that many complexes and entangled factors are at work,and further refinement is needed to explain the spatial and temporal variability of As release to groundwater of the Mekong River Delta(Vietnam).     

Catchment properties,function, and conceptual model representation: is there a correspondence?

This study investigates the possible correspondence between catchment structure, as represented by perceptual hydrological models developed from fieldwork investigations, and mathematical model structures, selected on the basis of reproducing observed catchment hydrographs. Three Luxembourgish headwater catchments are considered, where previous fieldwork suggested distinct flow‐generating mechanisms and hydrological dynamics. A set of lumped conceptual model structures are hypothesized and implemented using the SUPERFLEX framework. Following parameter calibration, the model performance is examined in terms of predictive accuracy, quantification of uncertainty, and the ability to reproduce the flow–duration curve signature. Our key research question is whether differences in the performance of the conceptual model structures can be interpreted based on the dominant catchment processes suggested from fieldwork investigations. For example, we propose that the permeable bedrock and the presence of multiple aquifers in the Huewelerbach catchment may explain the superior performance of model structures with storage elements connected in parallel. Conversely, model structures with serial connections perform better in the Weierbach and Wollefsbach catchments, which are characterized by impermeable bedrock and dominated by lateral flow. The presence of threshold dynamics in the Weierbach and Wollefsbach catchments may favour nonlinear models, while the smoother dynamics of the larger Huewelerbach catchment were suitably reproduced by linear models. It is also shown how hydrologically distinct processes can be effectively described by the same mathematical model components. Major research questions are reviewed, including the correspondence between hydrological processes at different levels of scale and how best to synthesize the experimentalist's and modeller's perspectives. Copyright © 2013 John Wiley & Sons, Ltd.     

Field testing cellulose-water oxygen isotope relations in periphyton for paleohydrological reconstructions

Journal of Paleolimnology - The oxygen isotope composition (δ18O) of aquatic cellulose extracted from lake sediment cores has long been used to reconstruct past hydrological responses to...     

What can we learn about changing ethnic diversity from the distributions of mixed-race individuals?

It is hypothesized that self-defined mixed-race persons live in residentially mixed areas in the largest metropolitan areas in California. The hypothesis is tested by examining the distribution of mixed-race persons among ethnically and racially diverse and nondiverse neighborhoods in the San Francisco and Los Angeles Metropolitan Areas. The research confirmed that mixed-race individuals are more likely to live in areas with ethnic diversity and that the tendency is greater for the mixed-race population in the San Francisco–Oakland Metropolitan Areas than in the Los Angeles Metropolitan Area. Mixed-race individuals live in neighborhoods which are diverse with mixes of all four major ethnic and racial groups, and in “well-off” (but not the most affluent) neighborhoods. The study also shows that the mixed-race population is youthful. The association of mixed-race individuals and racially integrated neighborhoods will have important implications for the evolving nature of spatial integration in California specifically, and the United States more generally.     

黄土孢粉分析的新途径——筛滤分析法

黄土-古土壤序列在全球古气候、古环境研究中占有不可替代的重要地位,而其中的孢粉是黄土高原生态环境演化过程中保存的直接生物学证据,它对建立黄土高原降水或湿度状况的时空变化特征,认识季风变迁的过程、规律以及未来发展趋势等具有重要的意义。随着黄土研究工作的不断深入,作为直接生物学证据的孢粉研究相对薄弱。其中最困扰的因素是从黄土中提取孢粉极其困难,分析技术上始终未能找到一个突破口,因此需要一种分析效果好、快捷、成本低的分析方法以获得大量高精度的孢粉数据。筛滤分析法正是为了适应黄土研究的需要而设计的一种新型的黄土孢粉分析方法。筛滤分析法利用真空状态下的气压差使样品在水中完全悬浮跳动,样品得到充分的冲洗并促使孢粉与其它无机质与有机质分离。相对真空的状态减少了微细颗粒对极为细小的网眼的阻塞,重力作用促使水及各类颗粒不断冲击筛网,使粒径小于10μm的物质较容易被过滤到聚水容器中,而孢粉与较少的大颗粒物质则被隔离在筛网之上,这使我们很容易用重液浮选出干净、清晰的孢粉底样。筛滤分析法与常规的黄土孢粉分析相比,具有以下特点:①大大降低了分析样品的重量及药品的消耗,一般仅需样品30 g左右,是常规分析法用量的1/6~1/8。②整个分析流程短, 12个样品一个流程仅需3~4 d。③筛滤分析法使孢粉几乎全部被隔离在筛网上而丢失极少,提高了黄土孢粉研究精度。④筛滤分析法几乎不破坏孢粉的结构,孢粉底样干净、清晰。使用筛滤分析法共分析耀县全新世黄土剖面69块孢粉样品,均发现数量不等的孢粉。孢粉底样干净、杂质少,结构清楚。共统计孢粉14978粒,分属27个科属,这些科属包括了黄土高原主要的孢粉类型。从孢粉结果可以初步确定,在全新世时期,位于黄土高原南缘的耀县地区,草本植物占全部孢粉总量的93.6%,而乔木植物仅占孢粉总量的4.7%。在整个剖面中没有出现乔木植物含量超过30%,可以认为在黄土高原的全新世时期是以草原植被为主,并无森林生长。     

Digital mapping of coastal boulders – high-resolution data acquisition to infer past and recent transport dynamics

Coastal boulder fields provide clues to long-term frequency-magnitude patterns of coastal flooding events and have the potential to play an important role in coastal hazard assessment. Mapping boulders in the field is time and labour-intensive, and work on intertidal reef platforms, as in the present study, is physically challenging. By addressing coastal scientists who are not specialists in remote sensing, this contribution reports on the possibilities and limitations of digital applications in boulder mapping in Eastern Samar, Philippines, where recent supertyphoons Haiyan and Hagupit induced high waves, coastal flooding and boulder transport. It is demonstrated how satellite imagery of sub-metre resolution (from Pléiades and WorldView-3 imagery) enables efficient analysis of transport vectors and distances of larger boulders, reflecting variation in latitudes of both typhoon tracks and approaching angles of typhoon-generated waves. During the investigated events, boulders with a-axes of up to 8 m were clearly identified to have been shifted for up to 32 m, mostly along the seaward margin of the boulder field. It is, however, hard to keep track of smaller boulders, and the length of a-axes and b-axes including their orientation is often impossible to map with sufficient accuracy. Orthophotographs and digital surface models created through the application of an unmanned aerial vehicle and the ‘Structure from Motion’ technique provide ultra-high-resolution data, and have the potential to not only improve the results of satellite image analysis, but also those from field mapping and may significantly reduce overall time in the field. Orthophotographs permit unequivocal mapping of a-axes and b-axes including their orientation, while precise values for c-axes can be derived from the respective digital surface models. Volume of boulders is best inferred from boulder-specific Structure from Motion-based three-dimensional models. Battery power, flight speed and altitude determine the limits of the area covered, while patches shielded by the boulders are difficult to resolve. For some tasks, field mapping remains mandatory and cannot be replaced by currently available remote sensing tools: for example, sampling for rock type, density and age dating, recording of lithological separation of boulders from the underlying geological unit and of geomorphic features on a millimetre to decimetre-scale, or documentation of fine-grained sediment transport in between the boulders in supratidal settings. In terms of future events, the digital products presented here will provide a valuable reference to track boulder transport on a centimetre to decimetre-scale and to better understand the hydrodynamics of extreme-wave events on a fringing reef coastline.     

How Well Does Chlorophyll Explain the Seasonal Variation in Phytoplankton Activity?

The seasonal variation in phytoplankton activity is determined by analysing 1385 primary production (PP) profiles, chlorophyll a (Chl) concentration profiles and phytoplankton carbon biomass concentrations (C) from the period 1998–2012. The data was collected at six different stations in the Baltic Sea transition zone (BSTZ) which is a location with strong seasonal production patterns with light as the key parameter controlling this productivity. We show that the use of Chl as a proxy for phytoplankton activity strongly overestimates the contribution from the spring production to annual pelagic carbon flow. Spring (February and March) Chl comprised 16–30% of the total annual Chl produced, whereas spring C was much lower (8–23%) compared to the annual C. Spring PP accounted for 10–18% of the total annual PP, while the July–August production contributed 26–33%, i.e. within the time frame when zooplankton biomass and grazing pressure are highest. That is, Chl failed in this study to reflect the importance of the high summer PP. A better proxy for biomass may be C, which correlated well with the seasonal pattern of PP (Pearson correlation, p < 0.05). Thus, this study suggests to account for the strong seasonal pattern in C/Chl ratios when considering carbon flow in coastal systems. Seasonal data for PP were fitted to a simple sinusoidal wave model describing the seasonal distribution of PP in the BSTZ and were proposed to present a better parameterizaton of PP in shallow stratified temperate regions than more commonly applied proxies.     

Application of diffracted wave analysis to time‐lapse seismic data for CO2 leakage detection

Time‐lapse seismic analysis is utilized in CO₂ geosequestration to verify the CO₂ containment within a reservoir. A major risk associated with geosequestration is a possible leakage of CO₂ from the storage formation into overlaying formations. To mitigate this risk, the deployment of carbon capture and storage projects requires fast and reliable detection of relatively small volumes of CO₂ outside the storage formation. To do this, it is necessary to predict typical seepage scenarios and improve subsurface seepage detection methods. In this work we present a technique for CO₂ monitoring based on the detection of diffracted waves in time‐lapse seismic data. In the case of CO₂ seepage, the migrating plume might form small secondary accumulations that would produce diffracted, rather than reflected waves. From time‐lapse data analysis, we are able to separate the diffracted waves from the predominant reflections in order to image the small CO₂ plumes. To explore possibilities to detect relatively small amounts of CO₂, we performed synthetic time‐lapse seismic modelling based on the Cooperative Research Centre for Greenhouse Gas Technologies (CO2CRC) Otway project data. The detection method is based on defining the CO₂ location by measuring the coherency of the signal along diffraction offset‐traveltime curves. The technique is applied to a time‐lapse stacked section using a stacking velocity to construct offset‐traveltime curves. Given the amount of noise found in the surface seismic data, the predicted minimum detectable amount of CO₂ is 1000–2000 tonnes. This method was also applied to real data obtained from a time‐lapse seismic physical model. The use of diffractions rather than reflections for monitoring small amounts of CO₂ can enhance the capability of subsurface monitoring in CO₂ geosequestration projects.     

1D velocity structure of the Po River plain (Northern Italy) assessed by combining strong motion and ambient noise data

Strong ground motions recorded on the sedimentary deposits of the Po River alluvial plain during the Emilia (Northern Italy) Mw 5.7 earthquake of May 29, 2012 are used to assess the vertical profile of shear-wave velocity above the limestone basement. Data were collected by a linear array installed for site effect studies after the Mw 5.9 mainshock of May 20, 2012. The array stations, equipped with both strong and weak motion sensors, are aligned in the South–North direction, at distances ranging from 1 to 26 km from the epicenter. The vertical components of ground motion show very distinctive, large-amplitude, low-frequency dispersive wave trains. Wavelet analysis yields group-velocity dispersion curve in the 0.2–0.7 Hz frequency band. The availability of a long ambient noise record allows estimates of the site resonance frequency along with its stability among stations. The joint inversion of dispersion of surface waves and ellipticity curves derived from ambient noise H/V allows extending investigations down to the sediment-limestone interface, at a depth of about 5,000 m. Our results add new information about the velocity structure at a scale that is intermediate between the local scale already investigated by other authors with small-aperture arrays using ambient noise and the regional scale inferred from modeling of seismogram waveforms recorded at hundreds of kilometers from the source.