Effect of Penetration Rates on the Piezocone Penetration Test in the Yellow River Delta Silt

Partial drainage often occurs during piezocone penetration testing on Yellow River Delta silt because of its intermediate physical and mechanical properties between those of sand and clay.Yet,there is no accurate understanding for the range of penetra-tion rates to trigger the partial drainage of silt soils.In order to fully investigate cone penetration rate effects under partial drainage condi-tions,indoor 1 g penetration model tests and numerical simulations of cavity expansion at variable penetration rates were carried out on the Yellow River Delta silt.The boundary effect of the model tests and the variation of key parameters at the different cavity ex-pansion rates were analyzed.The 1 g penetration model test results and numerical simulations results consistently indicated that the penetration rate to trigger the partially drainage of typical silt varied at least three orders of magnitude.The numerical simulations also provide the reference values for the penetration resistance corresponding to zero dilation and zero viscosity at any given normalized penetration rate for silt in Yellow River Delta.These geotechnical properties can be used for the design of offshore platforms in Yel-low River Delta,and the understanding of cone penetration rate effects under the partially drained conditions would provide some technical support for geohazard evaluation of offshore platforms.     

GNSS水汽层析的约束条件方程变权代数重构算法

基于传统代数重构算法（algebraic reconstruction technique, ART）提出一种约束条件方程变权的代数重构算法(variable weight algebraic reconstruction technique, VWART),利用2019-08香港地区CORS网GNSS观测数据进行实验,选用京士柏探空气象站探空数据进行验证分析。结果表明,相比于传统代数重构算法,变权代数重构算法的精度、稳定性和可靠性均有所提高。以探空数据为例,其RMSE降低20.334%;在不同程度降水条件下,变权代数重构算法反演的垂直水汽廓线分布均优于传统代数重构算法。     

Rockfall seismic features analysis based on in situ tests:frequency,amplitude, and duration

In the seismic event classification,determining the seismic features of rockfall is significantly important for the automatic classification of seismic events because of the huge amount of raw data recorded by seismic stations in continuous monitoring. At the same time, the rockfall seismic features are still not completely understood.This study concentrates on the rockfall frequency content, amplitude(ground velocity), seismic waveform and duration analysis, of an artificial rockfall test at Torgiovannetto(a former quarry in Central Italy). A total of 90 blocks were released in the test, and their seismic signals and moving trajectories were recorded by four tri-axial seismic stations and four cameras, respectively. In the analysis processing,all the artificial rockfall signal traces were cut separately and the seismic features were extracted individually and automatically. In this study, the relationships between a) frequency content and impacted materials, b) frequency content and the distance between block releasing position and seismic station(source-receiver distance) were discussed. As a result, we found that the frequency content of rockfall focuses on 10-60 Hz and 80-90 Hz within a source-receiver distance of 200 m, and it is well correlated with impacted material and source-receiver distance. To evaluate the difference between earthquake and rockfall, 23 clear earthquake signals recorded in a seven month-long continuous seismic monitoring, carried out with the four seismic stations, were picked out, according to the Italian national earthquakes database(INGV). On these traces we performed the same analysis as in the artificial rockfall traces, and two parameters were defined to separate rockfall events from earthquake noise. The first one, the amplitude ratio, is related to the amplitude variation of rockfall between two stations and is greater than that of earthquakes, because of the higher attenuation occurring for rockfall events, which consists in high frequencies whereas for earthquakes it consists in low frequencies. The other parameter, the shape of waveform of signal trace, showed a significant difference between rockfall and earthquake and that could be a complementary feature to discriminate between both. This analysis of artificial rockfall is a first step helpful to understand the seismic characteristics of rockfall, and useful for rockfall seismic events classification in seismic monitoring of slope.     

Water Cooperation Priorities in the Lancang-Mekong River Basin Based on Cooperative Events Since the Mekong River Commission Establishment

The Lancang-Mekong River has attracted much attention from researchers, but the cooperation on water issues in this river basin has been limited, even after the establishment of the Mekong River Commission(MRC). Cooperation on water resources has been determined as one of the key priority areas in the Lancang-Mekong Cooperation Mechanism, but there are no details of targets. In order to establish the priorities of water cooperation under the mechanism, we adopted nine categories to classify the objectives of 87 water cooperation events based on the ‘Lancang-Mekong Water Cooperative Events Database' from 1995 to 2015. Based on the occurrence of cooperative events, cooperative objectives, cooperative scales, and approaches to cooperation, we conducted statistical, correlation, and text analyses. Our analyses indicated the following results: under the impact of economic conditions inside and outside the river basin, full cooperation appeared more difficult than bilateral and multilateral cooperation. Each of the partners adopted different preferences for cooperation targets. Cooperation with more definite objectives was easier to establish than cooperation with broader and more complex objectives. The potential objectives for water cooperation were navigation, hydropower, joint management, data sharing, flood control and water use. Because hydropower development is controversial, and because water cooperation is avoided by most existing regional cooperation mechanisms due to its complexity, we suggest the following priority areas for water cooperation in the Lancang-Mekong River Basin. 1) Navigation and flood control/drought relief are attractive objectives for all the riparian countries across the whole watershed. 2) Data sharing should be a priority for cooperation in the watershed due to its laying the foundation for the equitable and reasonable utilization of transboundary waters. 3) Hydropower is an objective best implemented mainly through bilateral cooperation, and on tributaries.     

商标翻译的原则与方法

随着商品交流的不断扩大、经济全球化的深入，商标作为代表商品的符号，在国际贸易中扮演着十分重要的角色。商标的翻译也就日趋频繁。通过对一些商标译名范例的分析来探讨翻译商标的主要原则和方法。     

一种用于下放式ADCP的TVC增益补偿控制策略

讨论了下放式ADCP信号接收过程中的TVC增益补偿控制策略.结合下放式ADCP的工作特点,从能量节约的角度采取了同时测底测流的工作模式.针对此种工作模式,提出了按区间分段的TVC增益补偿控制策略.通过声呐方程和TVC距离一增益模型分析,进行了MATLAB仿真验证,并针对可能出现的问题,提出了以相关函数等效电压作为判据的解决方法.     

模糊综合评判法在新宾县地质灾害易发程度分区评价中的应用

结合辽宁省新宾县地质灾害发育情况,在充分分析影响该地区地质灾害发生发展的自然因素和人为因素基础上,应用模糊综合评判方法,通过网格单元剖分,对泥石流、崩塌、滑坡、地面塌陷、地裂缝5种地质灾害进行易发程度划分与评价.结合Visual BASIC软件编程对各单元区评定等级,对其数字化结果进行叠加分析,最后应用Sufer 7.0软件生成等值线进行了新宾县地质灾害易发区的划分并作出评价.     

霞水母刺丝囊毒素溶血活性的稳定性研究

从霞水母Cyanea sp.中分离刺丝囊,提取刺丝囊毒素(NV),并研究了温度、pH和几种化学组分对其溶血活性稳定性的影响.实验结果表明,在4～37℃范围内NV的溶血活性与温度变化密切相关,毒素在4℃以下几乎没有发生溶血反应,在37℃以下反应45 min以后,溶血活性达到最大值;毒素的溶血活性对pH敏感,在pH 7.8时.溶血活性最强,溶血率为93.53%.EDTA、NaCl和还原型谷胱甘肽(GSH)对NV溶血活性都具有稳定作用.通过正交实验发现,GSH对溶血活性的影响最大,当提取液中含有1.0 mmol/L GSH和5.0 mmol/L NaCl时毒素的溶血活性最强.DTT(二硫苏糖醇)明显降低毒素的溶血活性,说明毒素中溶血蛋白的活性很可能与分布在蛋白质表面的二硫键有关.Ca2+虽然能够增强毒素的溶血活性但是对毒素并没有稳定作用,所以Ca2+可能只是毒素溶血活性的活化剂.甘油对毒素的稳定作用不明显.     

北京“数九”时节的气候特征及其变化分析

根据北京市观象台1971～2007年"数九"时节的逐日气象要素资料,利用统计学方法,分析了北京"数九"时节的气候特征及其变化情况.结果显示:北京的寒冷阶段在"三九"至"五九",这期间在"三九"末到"四九"初日平均气温连续4天维持在最低值-3.8℃,各"九"的极端最低气温是-18.3℃,出现在"五九"的第1天;各"九"平均气温的最低值是-3.5℃,出现在"三九",因此,最冷的时段是"三九";"数九"时节81天的平均气温在70~90年代变暖较快,其增温幅度为1.25℃·(10 a)～(-1);各"九"平均气温随年代顺序变化亦属变暖趋势,"五九"的变暖幅度最大,达到1.38℃·(10 a)～(-1).     

2019-05-26秘鲁北部地震前低纬电离层变化分析北大核心CSCD

针对2019-05-26秘鲁北部M W8.0地震,利用CODE-TEC数据和GPS-TEC实测数据,分析此次地震前上空电离层总电子含量和电离层赤道异常变化。利用地震前2019-05-10~26总电子含量格网数据分析震前电离层赤道异常变化和电离层TEC随地理纬度的异常变化;然后利用RIOP和GLPS站的GPS-TEC数据,统计分析地震前电离层TEC日变化异常。结果表明,地震发生前3 d,电离层赤道异常“双峰”消失,且电离层TEC含量显著减少,可达10 TECu左右。在地震发生前3 d 16:00~20:00 UT,电离层TEC随纬度变化呈现双峰曲线特征,震中附近存在低谷,且在该期间RIOP和GLPS站电离层TEC也出现显著减少现象。