The mass,orbit, and tidal evolution of the Quaoar–Weywot system

Here we present new adaptive optics observations of the Quaoar–Weywot system. With these new observations we determine an improved system orbit. Due to a 0.39 day alias that exists in available observations, four possible orbital solutions are available with periods of ～11.6, ～12.0, ～12.4, and ～12.8 days. From the possible orbital solutions, system masses of 1.3–1.5 ± 0.1 × 10²¹ kg are found. These observations provide an updated density for Quaoar of 2.7–5.0 g cm^?3. In all cases, Weywot’s orbit is eccentric, with possible values ～0.13–0.16. We present a reanalysis of the tidal orbital evolution of the Quaoar–Weywot system. We have found that Weywot has probably evolved to a state of synchronous rotation, and has likely preserved its initial inclination over the age of the Solar System. We find that for plausible values of the effective tidal dissipation factor tides produce a very slow evolution of Weywot’s eccentricity and semi-major axis. Accordingly, it appears that Weywot’s eccentricity likely did not tidally evolve to its current value from an initially circular orbit. Rather, it seems that some other mechanism has raised its eccentricity post-formation, or Weywot formed with a non-negligible eccentricity.     

Why are climate policies of the present decade so crucial for keeping the 2 °C target credible?

Decision-makers have confirmed the long term objective of preventing a temperature increase greater than 2 °C. This paper aims at appraising by means of a cost-benefit analysis whether decision makers’ commitment to meet the 2 °C objective is credible or not. Within the framework of a cost-benefit type integrated assessment model, we consider that the economy faces climate damages with a threshold at 2 °C. We run the model for a broad set of scenarios accounting for the diversity of “worldviews” in the climate debate. For a significant share of scenarios we observe that it is considered optimal to exceed the threshold. Among those “non-compliers” we discriminate ”involuntary non-compliers” who cannot avoid the exceedance due to physical constraint from ”deliberate compliers” for whom the exceedance results from a deliberate costs-benefit analysis. A second result is that the later mitigation efforts begin, the more difficult it becomes to prevent the exceedance. In particular, the number of ”deliberate non-compliers” dramatically increases if mitigation efforts do not start by 2020, and the influx of involuntary non-compliers become overwhelming f efforts are delayed to 2040. In light of these results we argue that the window of opportunity for reaching the 2 °C objective with a credible chance of success is rapidly closing during the present decade. Further delay in finding a climate agreement critically undermines the credibility of the objective.     

Vegetation geo-climatic zonation in the rocky mountains,Northern Utah,USA

We developed a vegetation geo-climatic zonation incorporating the zonal concept, gradient and discriminant analysis in Wasatch Range, northern Utah, USA. Mountainous forest ecosystems were sampled and described by vegetation, physiographic features and soil properties. The Snowpack Telemetry and National Weather Service Cooperative Observer Program weather station networks were used to approximate the climate of sample plots. We analysed vegetation and environmental data using clustering, ordination, classification, and ANOVA techniques to reveal environmental gradients affecting a broad vegetation pattern and discriminate these gradients. The specific objective was to assess and classify the response of the complex vegetation to those environmental factors operating at a coarse-scale climatic level. Ordination revealed the dominant role of regional, altitude-based climate in the area. Based on vegetation physiognomy, represented by five tree species, climatic data and taxonomic classification of zonal soils, we identified two vegetation geo-climatic zones： （1） a montane zone, with Rocky Mountain juniper and Douglas-fir; and （2） a subalpine zone, with Engelmann spruce and subalpine fir as climatic climax species. Aspen was excluded from the zonation due to its great ecological amplitude. We found significant differences between the zones in regional climate and landformgeomorphology/soils. Regional climate was represented by elevation, precipitation, and air and soil temperatures; and geomorphology by soil types. This coarsescale vegetation geo-climatic zonation provides a framework for a comprehensive ecosystem survey, which is missing in the central Rocky Mountains of the United States. The vegetationgeoclimatic zonation represents a conceptual improvement on earlier classifications. This framework explicitly accounts for the influence of the physical environment on the distribution of vegetation within a complex landscape typical of the central Rocky Mountains and in mountain ranges elsewhere.     

Two successive phases of ultrahigh temperature metamorphism in Rogaland,S. Norway: Evidence from Y‐in‐monazite thermometry

In Rogaland, South Norway, a polycyclic granulite facies metamorphic domain surrounds the late‐Sveconorwegian anorthosite–mangerite–charnockite (AMC) plutonic complex. Integrated petrology, phase equilibria modelling, monazite microchemistry, Y‐in‐monazite thermometry, and monazite U–Th–Pb geochronology in eight samples, distributed across the apparent metamorphic field gradient, imply a sequence of two successive phases of ultrahigh temperature (UHT) metamorphism in the time window between 1,050 and 910 Ma. A first long‐lived metamorphic cycle (M1) between 1,045 ± 8 and 992 ± 11 Ma is recorded by monazite in all samples. This cycle is interpreted to represent prograde clockwise P–T path involving melt production in fertile protoliths and culminating in UHT conditions of ~6 kbar and 920°C. Y‐in‐monazite thermometry, in a residual garnet‐absent sapphirine–orthopyroxene granulite, provides critical evidence for average temperature of 931 and 917°C between 1,029 ± 9 and 1,006 ± 8 Ma. Metamorphism peaked after c. 20 Ma of crustal melting and melt extraction, probably supported by a protracted asthenospheric heat source following lithospheric mantle delamination. Between 990 and 940 Ma, slow conductive cooling to 750–800°C is characterized by monazite reactivity as opposed to silicate metastability. A second incursion (M2) to UHT conditions of ~3.5–5 kbar and 900–950°C, is recorded by Y‐rich monazite at 930 ± 6 Ma in an orthopyroxene–cordierite–hercynite gneiss and by an osumilite gneiss. This M2 metamorphism, typified by osumilite paragenesis, is related to the intrusion of the AMC plutonic complex at 931 ± 2 Ma. Thermal preconditioning of the crust during the first UHT metamorphism may explain the width of the aureole of contact metamorphism c. 75 Ma later, and also the rarity of osumilite‐bearing assemblages in general.     

Identifying the flow pattern and natural recharge at a strategic groundwater resource in the Dornogobi Province,Mongolia

The strategic project of economic development in the Dornogobi Province in Mongolia is dependent on water supply. Thus a comprehensive hydrogeological characterization was focused on the Upper Cretaceous multi-aquifer system north of Sainshand city. A conceptual model was developed to discover the groundwater flow pattern essential to correct the setting of the numerical model of groundwater flow created using MODFLOW to assess the natural recharge of the aquifer. The conceptualization was based on geological and hydrogeological characterization. However, the evaluation of hydrochemistry proved to be the key factor revealing the principal feature of the groundwater flow pattern, which is the presence of preferential flow zones. These zones allow for intensive transfer of relatively fresh Na(Mg,Ca)?HCO₃-dominated groundwater into discharge areas, where it leaks into the Quaternary aquifer. The numerical model suggested an enormous natural recharge of 22 100 m³/d, originating in 64% of the preferential flow zones.     

An evaporated seawater origin for the ore-forming brines in unconformity-related uranium deposits (Athabasca Basin, Canada): Cl/Br and δCl analysis of fluid inclusions

Analyses of halogen concentration and stable chlorine isotope composition of fluid inclusions from hydrothermal quartz and carbonate veins spatially and temporally associated with giant unconformity-related uranium deposits from the Paleoproterozoic Athabasca Basin (Canada) were performed in order to determine the origin of chloride in the ore-forming brines. Microthermometric analyses show that samples contain variable amounts of a NaCl-rich brine (Cl concentration between 120,000 and 180,000 ppm) and a CaCl₂-rich brine (Cl concentration between 160,000 and 220,000 ppm). Molar Cl/Br ratios of fluid inclusion leachates range from ∼100 to ∼900, with most values between 150 and 350. Cl/Br ratios below 650 (seawater value) indicate that the high salinities were acquired by evaporation of seawater. Most δ³⁷Cl values are between −0.6‰ and 0‰ (seawater value) which is also compatible with a common evaporated seawater origin for both NaCl- and CaCl₂-rich brines.Slight discrepancies between the Cl concentration, Cl/Br, δ³⁷Cl data and seawater evaporation trends, indicate that the evaporated seawater underwent secondary minor modification of its composition by: (i) mixing with a minor amount of halite-dissolution brine or re-equilibration with halite during burial; (ii) dilution in a maximum of 30% of connate and/or formation waters during its migration towards the base of the Athabasca sandstones; (iii) leaching of chloride from biotites within basement rocks and (iv) water loss by hydration reactions in alteration haloes linked to uranium deposition.The chloride in uranium ore-forming brines of the Athabasca Basin has an unambiguous dominantly marine origin and has required large-scale seawater evaporation and evaporite deposition. Although the direct evidence for evaporative environments in the Athabasca Basin are lacking due to the erosion of ∼80% of the sedimentary pile, Cl/Br ratios and δ³⁷Cl values of brines have behaved conservatively at the basin scale and throughout basin history.     

A large cloud outburst at Titan's south pole

Images of Titan acquired over five nights in October 2004 using the adaptive optics system at the Keck Observatory show dramatic increases in tropospheric cloud activity at the south pole compared with all other images of Titan clouds to date. During this time, Titan's south polar clouds brightened to more than 18 times their typical values. The Cassini Ta flyby of Titan occurred as this storm was rapidly dissipating. We find that the brightness of this cloud outburst is consistent with the dramatic transient brightening of Titan observed in atmospheric windows on two nights in 1995 by Griffith et al. [Griffith, C.A., Owen, T., Miller, G.A., Geballe, T., 1998. Nature 395 (6702) 575-578] if we scale the brightness of the cloud by projecting it onto the equator. While apparently infrequent, the fact that large cloud events have been observed in different seasons of Titan's year indicates that these large storms might be a year-round phenomenon on Titan. We propose possible mechanisms to explain these occasional short-term increases in Titan's cloud activity.     

Contrôle karstique de minéralisations nickélifères de Nouvelle-Calédonie

Fracturing associated with the nickeliferous mineralisations of New Caledonia has been successively considered as pre-dating and then post-dating the metallogenic processes. On the basis of a study of the dynamics of karst contemporaneous with lateritisation, a new emplacement model is proposed for the mineralisation: a network of hydraulic fractures of the crack-seal type governs the emplacement of mineralisation, associated with a network of normal faults that controls the sinking and evacuation of the karst products. To cite this article: A. Genna et al., C. R. Geoscience 337 (2005).     

Towards realistic simulations of lava dome growth using the level set method

The level set method has been implemented in a computational volcanology context. New techniques are presented to solve the advection equation and the reinitialisation equation. These techniques are based upon an algorithm developed in the finite difference context, but are modified to take advantage of the robustness of the finite element method. The resulting algorithm is tested on a well documented Rayleigh–Taylor instability benchmark [19], and on an axisymmetric problem where the analytical solution is known. Finally, the algorithm is applied to a basic study of lava dome growth.