REE distribution in the resin-asphaltene fractions as a geochemical criterion for identification of sources of trace elements in oil

This paper reports REE data on resin-asphaltene components of oil from six oil-gas-bearing provinces and on bitumoids from inferred oil-source rocks (domanikites and bazhenites). It was shown that, regardless of geological-tectonic structure of the regions, oil composition, depth of reservoirs, and host lithologies, oil exhibits significant REE fractionation, and, unlike bitumoids, positive Eu anomaly. The (Eu/Sm)_n ratio increases from asphaltenes to resins and further to oils. Based on REE distribution in oil, source rocks, and bitumoids, it was concluded that deep-seated fluids were one of the possible sources that defined the trace element composition of oil.     

Influence of spatial variability of permeability property on steady state seepage flow and slope stability analysis

In recent years, spatial variability modeling of soil parameters using random field theory has gained distinct importance in geotechnical analysis. In the present study, commercially available finite difference numerical code FLAC 5.0 is used for modeling the permeability parameter as spatially correlated log-normally distributed random variable and its influence on the steady state seepage flow and on the slope stability analysis are studied. Considering the case of a 5.0 m high cohesive–frictional soil slope of 30°, a range of coefficients of variation (CoV%) from 60 to 90% in the permeability values, and taking different values of correlation distance in the range of 0.5–15 m, parametric studies, using Monte Carlo simulations, are performed to study the following three aspects, i.e., (i) effect of stochastic soil permeability on the statistics of seepage flow in comparison to the analytic (Dupuit′s) solution available for the uniformly constant permeability property; (ii) strain and deformation pattern, and (iii) stability of the given slope assessed in terms of factor of safety (FS). The results obtained in this study are useful to understand the role of permeability variations in slope stability analysis under different slope conditions and material properties.     

3d transition metal L-edge X-ray absorption studies of the dichalcogenides of Fe, Co and Ni

The X-ray absorption spectra of the transition metal L_3,2-edges of the dichalcogenides FeS₂ (pyrite), FeSe₂, FeTe₂, CoS₂, CoSe₂, CoTe₂, NiS₂, NiSe₂ and NiTe₂ have been studied. These spectra are compared with theoretical simulations make using the atomic multiplet approach assuming on octahedral site for the metal atoms. The Ni spectra can be closely simulated using this approach but the Fe and Co spectra show less good fits to the experimental data. The reasons for this and its implications for the use of L-edge spectra in the study of such minerals are discussed in terms of the covalency and the ground states of the compounds; these results indicate the mixing of the ground states increases in the order Ni<Co<Fe.     

Mineral dissolution in the Cape Cod aquifer, Massachusetts, USA: I . Reaction stoichiometry and impact of accessory feldspar and glauconite on strontium isotopes, solute concentrations, and REY distribution

To compare relative reaction rates of mineral dissolution in a mineralogically simple groundwater aquifer, we studied the controls on solute concentrations, Sr isotopes, and rare earth element and yttrium (REY) systematics in the Cape Cod aquifer. This aquifer comprises mostly carbonate-free Pleistocene sediments that are about 90% quartz with minor K-feldspar, plagioclase, glauconite, and Fe-oxides. Silica concentrations and pH in the groundwater increase systematically with increasing depth, while Sr isotopic ratios decrease. No clear relationship between ⁸⁷Sr/⁸⁶Sr and Sr concentration is observed. At all depths, the ⁸⁷Sr/⁸⁶Sr ratio of the groundwater is considerably lower than the Sr isotopic ratio of the bulk sediment or its K-feldspar component, but similar to that of a plagioclase-rich accessory separate obtained from the sediment. The Si-⁸⁷Sr/⁸⁶Sr-depth relationships are consistent with dissolution of accessory plagioclase. In addition, solutes such as Sr, Ca, and particularly K show concentration spikes superimposed on their respective general trends. The K-Sr-⁸⁷Sr/⁸⁶Sr systematics suggests that accessory glauconite is another major solute source to Cape Cod groundwater. Although the authigenic glauconite in the Cape Cod sediment is rich in Rb, it is low in in-grown radiogenic ⁸⁷Sr because of its young Pleistocene age. The low ⁸⁷Sr/⁸⁶Sr ratios are consistent with equilibration of glauconite with seawater. The impact of glauconite is inferred to vary due to its variable abundance in the sediments. In the Cape Cod groundwater, the variation of REY concentrations with sampling depth resembles that of K and Rb, but differs from that of Ca and Sr. Shale-normalized REY patterns are light REY depleted, show negative Ce anomalies and super-chondritic Y/Ho ratios, but no Eu anomalies. REY input from feldspar, therefore, is insignificant compared to input from a K-Rb-bearing phase, inferred to be glauconite. These results emphasize that interpretation of groundwater chemistry, even in relatively simple aquifers, may be complicated by solute contributions from “exotic” accessory minerals such as glauconite. To detect such peculiarities, groundwater studies should combine the study of elemental concentration and isotopic composition of several solutes that show different geochemical behavior.     

Comparative Analysis of a Transition Region Bright Point with a Blinker and Coronal Bright Point Using Multiple EIS Emission Lines

Since their discovery 20 year ago, transition region bright points have never been observed spectroscopically. Bright point properties have not been compared with similar transition region and coronal structures. In this work we have investigated three transient quiet Sun brightenings including a transition region bright point (TR BP), a coronal bright point (CBP) and a blinker. We use time-series observations of the extreme-ultraviolet emission lines of a wide range of temperature T (logT=5.3?–?6.4) from the EUV Imaging Spectrometer (EIS) onboard the Hinode satellite. We present the EIS temperature maps and Doppler maps, which are compared with magnetograms from the Michelson Doppler Imager (MDI) onboard the SOHO satellite. Doppler velocities of the TR BP and blinker are ≤?25 km?s^?1, which is typical of transient TR phenomena. The Doppler velocities of the CBP were found to be ≤?20 km?s^?1 with exception of those measured at logT=6.2 where a distinct bi-directional jet is observed. From an EM loci analysis we find evidence of single and double isothermal components in the TR BP and CBP, respectively. TR BP and CBP loci curves are characterized by broad distributions suggesting the existence of unresolved structure. By comparing and contrasting the physical characteristics of the events we find that the BP phenomena are an indication of multi-scaled self-similarity, given the similarities in both their underlying magnetic field configuration and evolution in relation to EUV flux changes. In contrast, the blinker phenomena and the TR BP are sufficiently dissimilar in their observed properties as to constitute different event classes. Our work is an indication that the measurement of similar characteristics across multiple event types holds class-predictive power, and is a significant step towards automated solar atmospheric multi-class classification of unresolved transient EUV sources. Finally, the analysis performed here establishes a connection between solar quiet region CBPs and jets.     

Temporal Pointing Variations of the Solar Dynamics Observatory’s HMI and AIA Instruments on Subweekly Time Scales

Achieving subarcsecond co-registration across varying time-lines of multi-wavelength and instrument images is difficult and requires an accurate characterization of the instrument pointing jitter. We investigated the internal pointing errors on daily and yearly time-scales that occur across the Solar Dynamics Observatory’s (SDO) Atmospheric Imaging Assembly (AIA) and Helioseismic Magnetic Imager (HMI). Using cross-correlation techniques on the AIA 1700 Å passband and the HMI line-of-sight magnetograms from three years of observational image pairs at approximately three-day intervals, internal pointing errors were quantified. Pointing variations of ±?0.26″ (jitter-limited) and ±?0.50″ in the solar East–West (x) and North–South (y) directions, respectively, were measured. AIA observations of the Venus transit in June 2012 were used to measure existing coalignment offsets in all passbands. We found that the AIA passband pointing variations are 〈ΔX _CO〉=1.10″±1.41″ and 〈ΔY _CO〉=1.25″±1.24″ when aligned to the HMI nominal image center, referred to here as the CutOut technique. Minimal long-term pointing variations found between limb and correlation derived pointings provide evidence that the image-center positions provided by the instrument teams achieve single-pixel accuracy on time scales shorter than their characterization. However, daily AIA passband pointing variations of ??1.18″ indicate that autonomous subarcsecond co-registration is not fully achieved yet.     

Propagating Linear Waves in Convectively Unstable Stellar Models: A Perturbative Approach

Linear time-domain simulations of acoustic oscillations are unstable in the stellar convection zone. To overcome this problem it is customary to compute the oscillations of a stabilized background stellar model. The stabilization affects the result, however. Here we propose to use a perturbative approach (running the simulation twice) to approximately recover the acoustic wave field while preserving seismic reciprocity. To test the method we considered a 1D standard solar model. We found that the mode frequencies of the (unstable) standard solar model are well approximated by the perturbative approach within 1 μHz for low-degree modes with frequencies near 3 mHz. We also show that the perturbative approach is appropriate for correcting rotational-frequency kernels. Finally, we comment that the method can be generalized to wave propagation in 3D magnetized stellar interiors because the magnetic fields have stabilizing effects on convection.     

Shock effects in plagioclase feldspar from the Mistastin Lake impact structure,Canada

Shock metamorphism, caused by hypervelocity impact, is a poorly understood process in feldspar due to the complexity of the crystal structure, the relative ease of weathering, and chemical variations, making optical studies of shocked feldspars challenging. Understanding shock metamorphism in feldspars, and plagioclase in particular, is vital for understanding the history of Earth's moon, Mars, and many other planetary bodies. We present here a comprehensive study of shock effects in andesine and labradorite from the Mistastin Lake impact structure, Labrador, Canada. Samples from a range of different settings were studied, from in situ central uplift materials to clasts from various breccias and impact melt rocks. Evidence of shock metamorphism includes undulose extinction, offset twins, kinked twins, alternate twin deformation, and partial to complete transformation to diaplectic plagioclase glass. In some cases, isotropization of alternating twin lamellae was observed. Planar deformation features (PDFs) are notably absent in the plagioclase, even when present in neighboring quartz grains. It is notable that various microlites, twin planes, and compositionally different lamellae could easily be mistaken for PDFs and so care must be taken. A pseudomorphous zeolite phase (levyne‐Ca) was identified as a replacement mineral of diaplectic feldspar glass in some samples, which could, in some instances, also be potentially mistaken for PDFs. We suggest that the lack of PDFs in plagioclase could be due to a combination of structural controls relating to the crystal structure of different feldspars and/or the presence of existing planes of weakness in the form of twin and cleavage planes.