Structural and tectonothermal evolution of the ultrahigh-temperature Bakhuis Granulite Belt,Guiana Shield,Surinam:Palaeoproterozoic to recent

We constrain the multistage tectonic evolution of the Palaeoproterozoic UHT metamorphic(P=0.9–1.0 GPa,T>1000℃,t=2088–2031 Ma)Bakhuis Granulite Belt(BGB)in Surinam on the Guiana Shield,using large-to small-scale structures,Al-in-hornblende thermobarometry and published fluid inclusion and zircon geochronological data.The BGB forms a narrow,NE–SW striking belt between two formerly connected,~E–W oriented granite-greenstone belts,formed between converging Amazonian and West African continental masses prior to collision and Transamazonian orogeny.Inherited detrital zircon in BGB metasediments conforms agewise to Birimian zircon of West Africa and suggests derivation from the subsequently subducted African passive margin.Ultrahigh-temperature metamorphism may have followed slab break-off and asthenospheric heat advection.Peak metamorphic structures result from layer-parallel shearing and folding,reflecting initial transtensional exhumation of the subducted African margin after slab break-off.A second HT event involves intrusion,at ca.0.49 GPa,of charnockites and metagabbros at 1993–1984 Ma and a layered anorthosite at 1980 Ma,after the BGB had already cooled to<400℃.The event is related to northward subduction under the greenstone belts,along a new active margin to their south.A pronounced syntaxial bend in the new margin points northward towards the BGB and is likely the result of indentation by an anticlinorial flexural bulge of the subducting plate.Tearing of the subducting oceanic plate along this bulge explains why the charnockites are restricted to the BGB.The BGB subsequently experienced doming under an extensional detachment exposed in its southwestern border zone.Exhumation was focused in the BGB as a result of the flexural bulge in the subducting plate and localised heating of the overriding plate by charnockite magmatism.The present,straight NE–SW long-side boundaries of the BGB are superimposed mylonite zones,overprinted by pseudotachylites,previously dated at ca.1200 Ma and 950 Ma,respectively.The 1200 Ma mylonites reflect transpressional popping-up of the BGB,caused by EW-directed intraplate principal compressive stresses from Grenvillian collision preserved under the eastern Andes.Further exhumation of the BGB involved the 950 Ma pseudotachylite decorated faulting,and Phanerozoic faulting along reactivated Meso-and Neoproterozoic lineaments.     

Zur Dynamotheorie stellarer und planetarer Magnetfelder I. Berechnung sonnenähnlicher Wechselfeldgeneratoren

Non-reflectionsymmetric turbulent motions in an electrically conducting fluid provide for an average electromotoric force α parallel to the average magnetic field . This effect – furthermore called α-effect – can lead to a self-excited built-up of magnetic fields by dynamo action. Since by actions of Coriolis forces turbulent motions in rotating systems generally are non-reflectionsymmetric, the explanation of stellar and planetary magnetic fields becomes possible. – In this first part spherical alternating field dynamos are calculated on conditions similar to those at the sun; α-effect and differential rotation provide for dynamo action. – The basic equations, which form a system of partial differential equations, are treated by a separation method; in this way our problem is transformed into a two-parametric eigenvalue problem for an infinite system of ordinary differential equations. The two eigenvalues determine the frequency and the amount of the induction actions necessary for the field maintenance. The solution of this problem was made by an electronic computer. – The results give evidence for the possibility of magnetohydrodynamic alternating field dynamos. Furthermore the magnitude of the calculated eigenvalues and the similarities between the calculated field and the observed solar magnetic field are showing that the sun realizes a dynamo of this kind.     

Sedentary kaolinitic soil on the carboniferous limestone series in anglesey

A soil overlying Carboniferous calcarenites in Anglesey has a clay fraction dominantly of kaolinite in contrast to the illite-chlorite assemblages generally characteristic of North Wales soils. From the mineralogy and field evidence this soil is interpreted as resulting from Late Glacial in situ weathering of the underlying rocks.     

Observation of the solar eclipse 1966 May 20 in the region between 3.2 cm to 2.7 m wavelength

The solar eclipse 1966 May 20 was observed at 3.2, 10, 15, 20, 54, 59 cm, 1.05, 1.34 and 2.7 m wavelength by the observatories of the Heinrich-Hertz-Institut. The meter-wavelength observations were superposed by a noise storm. The result shows a region of enhanced radiation from the plages near the central meridian at the short wavelengths. Consulting additionally the observations made at Kiel, NERA, and Ondejov in the region of about 1.2 m wavelength it is possible to localize the source of the noise storm.     

Gold recovery from a refractory pyrrhotite ore by biooxidation

The aim of the present investigation was to study the biooxidation of a refractory gold-bearing pyrrhotite, in order to increase the gold recovery during the subsequent conventional cyanidation.Bacterial cultures utilised in the biological test consisted predominantly of Thiobacillus genus. Tests were conducted at laboratory scale. The gold content of the ore sample, coming from Bolivia, was of 10 g t⁻¹ Au.After 24 h leaching time by direct cyanidation, low gold recovery was obtained (<20% Au), with a high reagent consumption. On the other hand, a high gold recovery was achieved for the biooxidated samples: after 24 h cyanidation gold dissolution reached about 91% Au.Experimental results have shown the technical feasibility of the biooxidative pretreatment prior to conventional leaching and a complete circuit of treatment, on laboratory scale, has been developed considering also the subsequent gold recovery by carbon adsorption/desorption and electrowinning.A gold extraction yield of about 86% was determined in the whole process for gold extraction from pyrrhotite (biooxidation, solid–liquid separation, cyanidation, adsorption, desorption, electrowinning).     

Selection of hazardous waste dumpsites based on parameters effecting soil adsorption capacity – a case study

A careful selection of waste dumpsites, particularly hazardous ones, is very important for sustainable water resources management. Several laboratory experiments were carried out on the field samples to study adsorption capacity using p-dichlorobenzene (a solvent used in various industrial processes) as the test contaminant. The effect of parameters such as organic matter, clay, and iron and aluminium oxides, which are known to influence the soil adsorption capacity, are studied in the present work. Several soil samples from the Patancheru Industrial Area (Hyderabad, India) were collected and characterized. Only three soils, which had a comparatively high percentage of organic matter, clay, iron and aluminium oxide contents were used for the adsorption studies. The results clearly indicated a decrease in the adsorption capacity of the soils by as much as 75% when organic matter was removed. The other parameters such as clay and iron and aluminium oxides also play an important role in adsorption (57 and 39.8% reduction respectively). It was observed that out of the selected factors organic matter in the soils has the maximum effect regarding the adsorption of p-dichlorobenzene. Since the selected soils contain comparatively more organic matter, clay and iron and aluminium oxides in the selected industrial area, these can be used as sites for dumping hazardous waste, which can be further treated by methods like bioremediation.     

Proterozoic copper deposits in NW Queensland,Australia: Sulfur isotopic data

Sulfur isotopic disequilibrium is commonly observed between associated pyrite and copper sulfides in NW Queensland. A sulfur isotopic study of copper mineralization in dolomites at Paradise Valley and arenites at Mammoth has allowed the significance of such disequilibrium to be evaluated. Copper mineralization at Paradise Valley is characterized by a greater enrichment in ³⁴S, with δ³⁴S values often greater than +30‰, for both copper sulfides and associated syngenetic/diagneetic pyrite. At Mammoth, copper sulfides have isotopic compositions (δ³⁴S=?15.9 to ?0.3‰) transitional between disseminated syngenetic/diagenetic pyrite (δ³⁴S=?5.7 to ?1.7‰) and epigenetic vein pyrite (δ³⁴S=?17.9 to ?7.1‰) suggesting progressive reaction and replacement of syngenetic/diagenetic pyrite by a copper-bearing mineralizing fluid under oxidizing conditions. The isotopic data, within the constraints imposed by geological and geochemical factors, support a model of reaction between copper-bearing mineralizing fluids and pre-existing syngenetic/diagenetic pyrite for both the carbonate- and arenite-hosted deposits.     

Hydrothermally altered hyaloclastites at the Earth’s surface in the rift zone of Iceland: Problem of the biochemogenic accumulation of trace elements

Results of the mineral and chemical study of surface-altered hyaloclastites from the Theistareykir and Nämafjall geothermal zones, the North Iceland rift, are considered. The paper scrutinizes the composition of hydrothermally altered rocks mainly consisting of clay minerals related to the transformation of bedrock hyaloclastites. The clay minerals also make up slope talus or proluvial deltas around highlands. The major clay minerals in areas of the present-day fumarole activity are kaolinite and smectite, while the redeposited talus-proluvial sediments are mainly composed of smectites. The studied rocks contain framboids, globules, rods, and other structures with morphology and size similar to those of mineralized bacteria. The local concentration of Ag in proluvial deposits is attributed to the intense bacterial activity. It is supposed that elevated contents of some trace elements could be related to an intense microbiotic influence.     

Observation of abnormal thermal and infrasound signals prior to the earthquakes: a study on Bonin Island earthquake M7.8 (May 30, 2015)

Scientists from all over the world try to incorporate multi-disciplinary precursors to forecast the earthquake on a short-term basis. The authors here have analyzed outgoing longwave radiations acquired from polar-orbiting National Oceanic and Atmospheric Adminstration (NOAA) satellites and long-period infrasound waves recorded by the ground observatories in China prior to the recent Bonin Islands, Japan region earthquake which occurred on May 30, 2015 with the magnitude of 7.8. The anomalous outgoing longwave radiation (OLR) was observed on May 15, 2015, and was recorded by “NOAA 18” satellite during its “night pass.” Similarly, an abnormal infrasound spike was recorded at the Beijing station on May 17, 2015. The delay in observing anomalous infrasound waves compared to the OLR anomaly is due to these low-frequency waves traveling at low speed with the velocity range of 10–15 m/s. From the analysis of the results, it can be inferred that there is a substantial relation between parameters like OLR and infrasound waves; hence, the authors conclude that it is possible to forecast the earthquake on a short-term basis with reasonable accuracy.     

The effect of hydrothermal impregnation of Ni,Co, and Cu on HZSM-5 in the nitrogen oxide removal

The selective catalytic reduction (SCR) of nitrogen oxides on M/ZSM-5 (M = Cu, Ni, Co) catalysts was investigated. The catalysts were prepared using hydrothermal impregnation of the metal chlorides and nitrates on ZSM-5. The catalysts were characterized by nitrogen absorption/desorption, X-ray diffraction, Fourier transform infrared (FTIR) spectroscopy, ultraviolet–visible diffusion reflection spectroscopy (UV–Vis DRS), temperature-programmed reduction (TPR), N₂O chemisorption and ammonia temperature-programmed desorption. The performance tests for SCR of NO were carried out in a fixed-bed reactor from 250 to 400 °C. During the impregnation, part of the aluminum was eliminated from the zeolite framework due to the acidity of the metal salt solution and heating process as indicated by the reduction in the intensity of XRD peaks and variations in the positions of the FTIR vibrational bands. The Cu(Cl)/ZSM-5 catalyst exhibited NO conversions over 90% over the entire temperature range. The other catalysts showed comparable activities, but the catalysts prepared with chloride salt precursors demonstrated higher activity than those based on nitrate as the precursor. Moreover, the TPR reduction peaks of the metal ion in catalysts prepared with chloride precursor were lower, and their UV–Vis absorption bands revealed bathochromic transfers with higher intensities. Concurrent with these changes, the activity of the catalyst increased. The TPR profiles indicated that Cu and Ni both had an oxidation number of +2, whereas Co was present in the oxidation number of +2 and +3. The mass transfer limitation analysis showed that for particles in millimeter size range or larger significant intra-particle mass transfer limitation would be expected.