Spatial uniformity of sediment accumulation in varved lake sediments in northern Sweden

As part of an investigation aimed at assessing the potential of northern Swedish varved lake sediments for fine-resolution reconstruction of past climatic conditions, the following questions were addressed; how representative is a single core, does the appearance of varves change as the sediment ages, and how can varve thickness and within-varve structures be digitized? Analyses of replicate cores from Kassjön, using sample sequences of seasonal, annual and centennial time resolution, show that spatial variability of sediment accumulation in the varved sediment is very low. Comparisons of intensity curves from image analysis of freeze cores of recent sediments from Lake Nylandssjön, sampled in 1980 and 1985, indicate that the varves acquire their appearance at the sediment-water interface during sedimentation and that the varve structures are preserved during diagenetic processes. Measurement of varve thicknesses with a tree-ring microscope and with image analysis gave similar results. However, with image analysis, within-varve structures such as colour variations and thicknesses of seasonal layers, can also be recorded, increasing the possibilities for palaeolimnological and palaeoclimatic inferences.     

Investigating hydrogeomorphic floodplain mapping performance with varying DTM resolution and stream order

Hydrogeomorphic models allow parsimonious, fast and effective floodplain extent mapping using topographic data as the main input. Hydrogeomorphic approaches enforce the principle that floodplains are well-distinguished and unique landscape features within river corridors. We investigated the sensitivity of a hydrogeomorphic floodplain delineation algorithm, based on a hydrological power law, relating flow depth to contributing area, digital terrain model (DTM) resolution and river network hierarchy. In addition, we compared the results to other common floodplain mapping methods using standard flood-hazard maps as a reference. Taking the Arno River Basin, Italy, as a case study, our results show a dependency between the optimal power law parameters and DTM resolution, with larger parameter values required to reach optimal consistency with flood-hazard maps as DTM resolution increased. Floodplain mapping performance was also found to depend on stream order. We further tested the model consistency at a larger scale to evaluate its performance with respect to inundation maps in Hungary, Italy, Spain and the UK. Our study suggests that pre-defined power law parameters can be assumed, considering DTM resolution and stream order, supporting the use of the presented hydrogeomorphic model for large-scale floodplain mapping in ungauged basins where reference flood-hazard maps are not available.     

Comparison of wind measurements by means of industrially produced sodar and high-altitude meteorological mast in Obninsk

The real characteristics of the MFAS sodar industrially produced by Scintec AG (Germany) are given. The paper presents a wider range of altitudes as compared with the papers published before as a result of using the meteorological mast with the height of 310 m and longer duration of practically continuous testing embracing different weather conditions in the period from July to November 2008. During the comparison, the 10-min averaging time for the wind speed and direction is used. The comparison of the data of acoustic sounding and contact measurement methods indicates that the sodar provides reliable information on the vertical profiles of average wind speed within the considered altitude range up to 300 m except the cases of heavy rainfalls and low wind speed.     

A Sensitive and Versatile Multiplex PCR System for the Rapid Detection of Enterotoxigenic (ETEC), Enterohaemorrhagic (EHEC) and Enteropathogenic (EPEC) Strains of Escherichia coli

Although Escherichia coli is widely distributed in the marine environment, only a small percentage are pathogenic to humans. Nonetheless, the widespread occurrence of waterborne infections of E. coli origin in humans has become one of the major health problems worldwide. To date, several types of enterovirulent E. coli have been recognized as the aetiologic agents of various gastrointestinal infections in humans. The most commonly encountered are those belonging to the enterotoxigenic (ETEC), enteroinvasive (EIEC), enterohaemorrhagic (EHEC) and enteropathogenic (EPEC) subtypes. In order to better determine the health risks that are associated with exposure to some of these specific subtypes, we have developed a very sensitive multiplex PCR system for the rapid detection and typing of ETEC, EHEC and possibly EPEC strains of E. coli in the aquatic environment. The target genes chosen for this investigation included: the PHO-A housekeeping gene (present in all E. coli); the LT1, LT2 and ST1 genes of ETEC; the VT1 and VT2 verotoxin, and EAE virulence genes of EHEC and EPEC, respectively. Six pairs of oligonucleotide primers were designed to simultaneously amplify internal fragments of these genes by multiplex PCR to generate PCR products that could be analysed and confirmed with relative ease by gel electrophoresis and HincII enzyme digestion. The results showed that the six sets of PCR primers were highly specific for their target genes and produced specific amplimers of the expected size from several control strains of E. coli – ATCC 35401 (LT1+/ST1+); SA53 (LT2+/VT2+); and O157 (VT1+/VT2+/EAE+). The detection sensitivity of the multiplex PCR system for the six target genes in an E. coli cell mixture was optimized and enhanced by preincubating serially diluted cells in Luria-Bertani broth for 6 h prior to PCR analysis. The results obtained indicated a detection sensitivity of 10° CFU (of each strain) per 100 μl reaction. Multiplex PCR analysis of seawater samples collected from four sewage-polluted sites in Hong Kong indicated the presence in all four samples of E. coli bacteria that were positive for LT1, ST1, VT1 and EAE virulence genes. Overall, the data indicated that the multiplex PCR system described in this study is a potentially very useful and powerful method for routine monitoring and risk assessment of water quality.     

Mercury in the sedimentary deposits of Lake Baikal

Mercury distribution was examined in the sediments of Lake Baikal that were sampled within the scope of the Baikal Drilling International Project in 1996–1999. The Hg concentrations in the ancient sediments are close to those in the modern sediments with the exception of a few peak values, whose ages coincide with those of active volcanism in adjacent areas. Mercury was demonstrated to be contained in the sediments in the adsorbed Hg⁰ mode, predominantly in relation with organic matter. When the organic matter of the bottom sediments is decomposed in the course of lithification, Hg is retained in the sediments adsorbed on the residual organic matter, and the concentration of this element corresponds to its initial content in the bottom sediments during their accumulation. Mercury concentrations in lithologically distinct bottom sediments of Lake Baikal and its sediments as a whole depend on the climate. Sediments that were formed during warm periods of time contain more Hg than those produced during cold periods or glaciation. Periodical variations in the Hg concentrations in the bottom sediments of Lake Baikal reflect the variations in the contents of this element in the Earth’s atmosphere in the Late Cenozoic, which were, in turn, controlled by the climatic variations on the planet and, thus, can be used for detailed reconstructions of variations in the average global temperature near the planet’s surface.     

Microbial ecology of the stratified water column of the Black Sea as revealed by a comprehensive biomarker study

The stratified water column of the Black Sea is partitioned into oxic, suboxic, and euxinic zones, each characterized by different biogeochemical processes and by distinct microbial communities. In 2003, we collected particulate matter by large volume in situ filtration at the highest resolution to date for lipid biomarker analysis and bacterioplankton for enumeration of major prokaryotic groups. Abundances of several prokaryotic groups were estimated using CARD-FISH probes specific for Bacteria, Archaea (Crenarchaeota and Euryarchaeota), epsilonproteobacteria (mainly sulfide oxidizers) and sulfate reducing bacteria. We also measured a wide range of bacterial and archaeal lipid biomarkers. Depth distributions of diagnostic biomarkers are matched with zonation of microbial processes, including aerobic bacterial oxidation of methane, oxidation of ammonium by bacteria and archaea, metal reduction, and sulfide oxidation at the chemocline, and bacterial sulfate reduction and anaerobic oxidation of methane by archaea in the anoxic zone. Cell densities for archaea and sulfate reducing bacteria are estimated based on water column biomarker concentrations and compared with CARD-FISH results.     

A coupling of mixed and continuous Galerkin finite element methods for poroelasticity II: the discrete-in-time case

In this paper, we formulate a finite element procedure for approximating the coupled fluid and mechanics in Biot’s consolidation model of poroelasticity. Here, we approximate the pressure by a mixed finite element method and the displacements by a Galerkin method. Theoretical convergence error estimates are derived in a discrete-in-time setting. Of particular interest is the case when the lowest-order Raviart–Thomas approximating space or cell-centered finite differences are used in the mixed formulation and continuous piecewise linear approximations are used for displacements. This approach appears to be the one most frequently applied to existing reservoir engineering simulators.     

PRINCIPLES OF THE COMPARISON AND INTERPRETATION OF MULTITEMPORAL IMAGERY

General principles are outlined for the use of a series of remote sensing images (obtained for the same area of the earth's surface for different points in time) in the detection of significant changes in land use and environmental conditions. Emphasis is placed on visual methods of interpretation, and a number of different methods for graphically analyzing the dynamics of earth surface features on photographic image products are described. A final section describes procedures for cartographically representing the dynamics of features interpreted from multitemporal images. Translated by Jay Mitchell; PlanEcon, Inc.; Washington, DC 20005 from: Vestnik Moskovskogo Universiteta, geografiya, 1987, No. 6, pp. 57-60.     

Topography as a major factor in the development of arcuate thrust belts: insights from sandbox experiments

We have used sandbox experiments to investigate and to illustrate the effects of topography upon the development of arcuate thrust belts. In experiments where a sand pack shortened and thickened in front of an advancing rectilinear piston, the geometry of the developing thrust wedge was highly sensitive to variations in surface topography. In the absence of erosion and sedimentation, the surface slope tended to become uniform, as predicted by the theory of critical taper. Under these conditions, the wedge propagated by sequential accretion of new thrust slices. In contrast, where erosion or sedimentation caused the topographic profile to become irregular, thrusts developed out of sequence. For example, erosion throughout a hinterland caused underlying thrusts to remain active and inhibited the development of new thrusts in the foreland. Where initial topography was irregular in plan view, accreting thrusts tended to be arcuate. They were convex towards the foreland, around an initially high area; concave towards the foreland, around an initially low area. Initial plateaux tended to behave rigidly, while arcuate thrust slices accreted to them. Thrust motions were radial with respect to each plateau. Within transfer zones to each side, fault blocks rotated about vertical axes and thrust motions were oblique-slip. At late stages of deformation, the surface slope of the thrust wedge tended towards a uniform value. Initial mountains of conical shape (representing volcanoes) also escaped deformation, except at depth, where they detached. Arcuate thrust slices accreted to front and back. Where a developing thrust wedge was subject to local incision, accreting thrust slices dipped towards surrounding areas of high topography, forming Vs across valleys.Arcuate structural patterns are to be found around the three highest plateaux on Earth (Tibet, Pamirs and Altiplano) and around the Tromen volcanic ridge in the Neuquén Basin of northern Patagonia. We infer that these areas behaved in quasi-rigid fashion, protected as they were by their high topography.     

Isotope and trace element evidence for three component mixing in the genesis of the North Luzon arc lavas (Philippines)

Post-3Ma volcanics from the N Luzon arc exhibit systematic variations in ⁸⁷Sr/⁸⁶Sr (0.70327–0.70610), ¹⁴³Nd/¹⁴⁴Nd (0.51302–0.51229) and ²⁰⁸Pb^*/²⁰⁶Pb^* (0.981–1.035) along the arc over a distance of about 500 km. Sediments from the South China Sea west of the Manila Trench also exhibit striking latitudinal variations in radiogenic isotope ratios, and much of the isotopic range in the volcanics is attributed to variations in the sediment added to the mantle wedge during subduction. However, Pb-Pb isotope plots reveal that prior to subduction, the mantle end-member had high 8/4, and to a lesser extent high 7/4, similar to that in MORB from the Indian Ocean and the Philippine Sea Plate. Th isotope data on selected Holocene lavas indicate a source with unusually high Th/U ratios (4.5–5.5). Combined trace element and isotope data require that three end-members were implicated in the genesis of the N Luzon lavas: (1) a mantle wedge end-member with a Dupal-type Pb isotope signature, (2) a high LIL/HFS subduction component interpreted to be a slab-derived hydrous fluid, and (3) an isotopically enriched end-member which reflects bulk addition (<5%) of subducted S China Sea terrigenous sediment. The ⁸⁷Sr/⁸⁶Sr ratios in the volcanics show a restricted range compared with that in the sediments, and this contrasts with ¹⁴³Nd/¹⁴⁴Nd and ²⁰⁸Pb^*/²⁰⁶Pb^*, both of which have similar ranges in the volcanics and sediments. Such differences imply that whereas the isotope ratios of Nd, Pb and Th are dominated by the component from subducted sediment, those of Sr reflect a larger relative contribution from the slab-derived fluid.