Reliability assessment of serviceability performance of braced retaining walls using a neural network approach

In urban environments, one major concern with deep excavations in soft clay is the potentially large ground deformations in and around the excavation. Excessive movements can damage adjacent buildings and utilities. There are many uncertainties associated with the calculation of the ultimate or serviceability performance of a braced excavation system. These include the variabilities of the loadings, geotechnical soil properties, and engineering and geometrical properties of the wall. A risk‐based approach to serviceability performance failure is necessary to incorporate systematically the uncertainties associated with the various design parameters. This paper demonstrates the use of an integrated neural network–reliability method to assess the risk of serviceability failure through the calculation of the reliability index. By first performing a series of parametric studies using the finite element method and then approximating the non‐linear limit state surface (the boundary separating the safe and ‘failure’ domains) through a neural network model, the reliability index can be determined with the aid of a spreadsheet. Two illustrative examples are presented to show how the serviceability performance for braced excavation problems can be assessed using the reliability index. Copyright © 2005 John Wiley & Sons, Ltd.     

Sea-level rise impacts on longitudinal salinity for a low-gradient estuarine system

Climatic Change - Salinity response to sea-level rise is evaluated for a low-gradient, tidally active estuary, the lower St. Johns River, Florida. A high-resolution numerical model is forced by...     

Photometric period and rotational brightness modulation of V833 Tau

Photometric data covering 1994–2009, obtained at the Crimean Astrophysical Observatory or retrieved from the ASAS and SuperWASP catalogs, were used to analyze the brightness variations of the rapidly rotating star V833 Tau, whose activity level is close to saturation. Combined with previously published results, these data represent for the first time all stages in the development of the star’s 19- year activity cycle. The photometric period and rotational-modulation amplitude for different epochs are determined, and the qualitative pattern of the spots is considered. The photometric period is close to the orbital period, but always exceeds it, indicating that surface inhomogeneities are located far from the equatorial plane. With the high spottedness of the star, reaching 28% at the cycle maximum, the rotationalmodulation amplitude is 0.05?0.1 ^m , and increases during the growth and decline phases of the 19-year cycle. The rotational modulation is due to spots with higher latitudes than in the case of the Sun, and concentrating on active longitudes.     

Thermal evolution of an extensional detachment as constrained by organic metamorphic data and thermal modeling: Graz Paleozoic Nappe Complex (Eastern Alps)

Following Early Cretaceous nappe stacking, the Eastern Alps were affected by late-orogenic extension during the Late Cretaceous. In the eastern segment of this range, a Late Cretaceous detachment separates a very low- to low-grade metamorphic cover (Graz Paleozoic Nappe Complex, GPNC) above a low- to high-grade metamorphic basement. Synchronously, the Kainach Gosau Basin (KGB) collapsed and subsided on top of the section.Metamorphism of organic material within this section has been investigated using vitrinite reflectance data and Raman spectra of extracted carbonaceous material. In the southern part of the GPNC, vitrinite reflectance indicates a decrease in organic maturity towards the stratigraphic youngest unit. The remaining part of the GPNC is characterized by an aureole of elevated vitrinite reflectance values and Raman R2 ratios that parallels the margins of the GPNC. Vitrinite reflectance in the KGB shows a steep coalification gradient and increases significantly towards the western basin margin. The observed stratigraphic trend in the southern GPNC is a result of deep Paleozoic to Early Cretaceous burial. This maturity pattern was overprinted along the margins by advective heat and convective fluids during Late Cretaceous to Paleogene exhumation of basement rocks.During shearing, the fault zone was heated up to ca. 500 °C. This overprint is explained by a two-dimensional thermal model with a ramp-flat fault geometry and a slip rate of 1 to 1.5 cm/year during 5 Ma fault movement. The collapse basin above the detachment subsided in a thermal regime which was characterized by relaxing isotherms.     

TWO STRUCTURAL MODELS FOR THE WESTERN FLANK OF THE BRABANT MASSIF*

This paper is concerned with an interpretation of the Bouguer anomaly on the Western flank of the Brabant Massif (Belgium). The position, shape, and density contrast of elementary bodies in the upper part of the earth's crust are determined in a purely numerical manner. A batholith-like body and a basin-type structure both adequately account for the observed surface field, at least from a one-sided geophysical and mathematical point of view. Since seismological control is lacking the two models are representative of the ambiguity and indeterminacy of the definitions of the geologic cause of the anomalous features, if the data are restricted to gravity information alone.     

Sedimentation on the Ionian active margin (Hellenic arc) — Provenance of sediments and mechanisms of deposition

Lithological, sedimentological, mineralogical and faunal analyses of twenty cores from the western Peloponnesus margin and adjacent Matapan Trench permit the origin of the sediments and the processes of sedimentation to be defined in some detail.Except for the ash layers derived from the Ischian Province, the major part of the sediment is local in origin (Peloponnesus). Analyses of heavy, light and clay minerals enable three main provinces to be distinguished. Each of these provinces includes one or more slope basins and a portion of trench, without lateral connection between them and mixing of inputs.The diversity and complexity of sedimentary structures, the granulometric characters, the mixed fauna (molluscs and ostracods) and the variability of rates of sedimentation all testify to the prevalence of reworking phenomena and gravitative processes.These data confirm and elaborate on the model of sedimentation deduced from seismic studies in which sediments are successively trapped, released by the slope basins and transferred via channels and canyons towards the underlying trench basins. This “cascade feeding” appears characteristics of this subductive sedimentary environment.     

Thermodynamic controls on element partitioning between titanomagnetite and andesitic–dacitic silicate melts

Titanomagnetite–melt partitioning of Mg, Mn, Al, Ti, Sc, V, Co, Ni, Cu, Zn, Ga, Zr, Nb, Mo, Hf and Ta was investigated experimentally as a function of oxygen fugacity (fO₂) and temperature (T) in an andesitic–dacitic bulk-chemical compositional range. In these bulk systems, at constant T, there are strong increases in the titanomagnetite–melt partitioning of the divalent cations (Mg²⁺, Mn²⁺, Co²⁺, Ni²⁺, Zn²⁺) and Cu²⁺/Cu⁺ with increasing fO₂ between 0.2 and 3.7 log units above the fayalite–magnetite–quartz buffer. This is attributed to a coupling between magnetite crystallisation and melt composition. Although melt structure has been invoked to explain the patterns of mineral–melt partitioning of divalent cations, a more rigorous justification of magnetite–melt partitioning can be derived from thermodynamic principles, which accounts for much of the supposed influence ascribed to melt structure. The presence of magnetite-rich spinel in equilibrium with melt over a range of fO₂ implies a reciprocal relationship between a(Fe²⁺O) and a(Fe³⁺O_1.5) in the melt. We show that this relationship accounts for the observed dependence of titanomagnetite–melt partitioning of divalent cations with fO₂ in magnetite-rich spinel. As a result of this, titanomagnetite–melt partitioning of divalent cations is indirectly sensitive to changes in fO₂ in silicic, but less so in mafic bulk systems.     

Acid mine drainage at Cerro Rico de Potosí I: unabated high-strength discharges reflect a five century legacy of mining

Intensive mining and processing of Ag, Sn, Pb and Zn ores have occurred in various locations within and around the city of Potosí, Bolivia since 1545. Surface and subsurface waters, stream sediments and soils are contaminated with various ecotoxic metals in the headwaters of the economically vital, yet highly impacted, upper Rio Pilcomayo watershed. Previous studies have documented downstream trace metal contamination, however, not addressed specific sources. The AMD discharges identified in this study help link downstream pollution to primary origins. The majority of AMD would be considered high-strength due to metal concentrations and acidity orders of magnitude greater than typical AMD. Discharges from both operating and abandoned portals as well as tailings-related deposits displayed a high degree of heterogeneity with total metal concentrations ranging from 0.11 to 7480, <0.022 to 889, <0.0006 to 65.3, <0.001 to 310, 0.12 to 72,100, 0.3 to 402, <0.012 to 34.8, and 0.24 to 19,600 mg/L of Al, As, Cd, Cu, Fe, Mn, Pb and Zn, respectively. Net acidity and pH ranged from −10 to 246,000 mg/L as CaCO₃ equivalent and 0.90–6.94 standard units, respectively. Data were gathered during two sampling events centered around the most extreme periods of the dry and wet seasons of one water-year. Loadings to local streams were marginally greater for most metals in the wet season. If observed loadings are historically representative, Cerro Rico AMD has contributed thousands of tonnes of ecotoxic metals to the upper Rio Pilcomayo over the last five centuries. Metal and hydrogen ion concentrations in the majority of AMD sampled were several orders of magnitude above discharge limits set by the Bolivian government, yet no action has historically or contemporarily been taken.     

Chemical composition of Russian Arctic precipitation in 2007-2015

The results of observations of the chemical composition of precipitation in the Russian Arctic in 2007-2015 are summarized including the data from NP-35 drifting ice station obtained in 2007-2008 in the framework of the joint program of Arctic and Antarctic Research Institute and Voeikov Main Geophysical Observatory. The qualitative and quantitative difference in the chemical composition of precipitation in the Atlantic, Siberian, and Pacific sectors of the Russian Arctic is revealed. It is found that the concentration of microelements (heavy metals) in precipitation at NP-35 ice station did not exceed 12% of total ions at the lowest mineralization. The comparative analysis is presented of the concentration of sulfate ions in precipitation in Norilsk and at NP-35 ice stations.     

The marine Lockne impact structure, Jämtland, Sweden: a review

The Lockne impact structure in Jämtland (63°00'20"N, 14°49'30"E) formed in the Middle Ordovician at approximately 455 Ma. The structure is a concentric crater with a total diameter of 13.5 km. The impact took place in a marine environment. Seawater played an important role in the cratering process and in crater morphology and the amount of melt remaining in the structure. Seawater rushed back into the crater in a resurge, eroding and redepositing the ejecta among the resurge deposit. Seawater furthermore facilitated the hydrothermal system, which was driven by the residual heat in the structure. The Lockne structure hosts shocked quartz and an iridium anomaly. The rim wall round the crater collapsed in the modification stage of the crater and was annihilated by the resurge. The fractured basement and the impact breccia were initially rich in open cavities. These became partly filled with dominantly calcite. The filling contributed to a low-density contrast, generating a negative gravity anomaly of 22 gu. The gravity model indicates a central uplift and a NW-directed tilt of the structure. This tilt is also seen in the magnetic models. The apparent absence of any impact melt is probably real and related to the environment of impact.