A Practical Procedure for the Measurement of Fragmentation by Blasting by Image Analysis

Summary. The operation of a digital image analysis system in a limestone quarry is described. The calibration of the system, required in order to obtain moderately reliable fragmentation values, is done from muckpile sieving data by tuning the image analysis software settings so that the fragmentation curve obtained matches as close as possible the sieving. The sieving data have also been used to extend the fragment size distribution curves measured to sizes below the system’s optical resolution and to process the results in terms of fragmented rock, discounting the material coming from a loose overburden (natural fines) that is cast together with the fragmented rock. Automatic and manual operation modes of the image analysis are compared. The total fragmentation of a blast is obtained from the analysis of twenty photographs; a criterion for the elimination of outlier photographs has been adopted using a robust statistic. The limitations of the measurement system due to sampling, image processing and fines corrections are discussed and the errors estimated whenever possible. An analysis of consistency of the results based on the known amount of natural fines is made. Blasts with large differences in the amount of fines require a differentiated treatment, as the fine sizes tend to be the more underestimated in the image analysis as they become more abundant; this has been accomplished by means of a variable fines adjustment factor. Despite of the unavoidable errors and the large dispersion always associated with large-scale rock blasting data, the system is sensitive to relative changes in fragmentation.     

Assessing the Vibrational Frequencies of the Cathedral of Cologne (Germany) by Means of Ambient Seismic Noise Analysis

Ambient seismic noise measurements were conducted inside the Cathedral of Cologne (Germany) for assessing its frequencies of vibration and for checking whether these occur in the range where soil amplification is expected. If this is the case, damages may increase in case of an earthquake due to an increased structural response of the building. Analysis of the ratio between the horizontal and vertical components of the spectra recorded at stations located inside the building as well as the ratio between the corresponding components of the spectra recorded simultaneously inside the building and at a reference station placed in the basement of the cathedral indicated several modes of vibration. Facilitated by these results an assessment of the seismic vulnerability was attempted for a 2D ground motion scenario using the finite element method.     

The Spačice eclogite: constraints on the P–T–t history of the Gföhl granulite terrane, Moldanubian Zone, Bohemian Massif

Summary In the Kutná Hora Complex, the Běstvina Formation, which is similar to Gf?hl granulite, contains eclogite that has escaped widespread retrograde recrystallization. The eclogite assemblage, garnet + omphacite + quartz + rutile ± plagioclase, yields an estimate for peak metamorphic conditions of 18–20 kbar and 835–935 °C, which is comparable to that determined from felsic granulite, 14–20 kbar and 900–1000 °C. Garnet in eclogite exhibits both prograde and retrograde compositional zoning, from which constraints on thermal history of the Gf?hl terrane can be derived by diffusion modelling. At 900 °C, a garnet grain of 800–1000 μm radius would homogenize in 7.5–11.7 million years, but the existence of compositional gradients on a length scale of 100–200 μm suggests that the duration of peak metamorphism may have been limited to ∼500,000 years. Diffusion modelling of retrograde zoning in garnet yields a cooling rate of 150–100 °C/m.y. for a radius of 800–1000 μm and initial temperature of 900 °C. The relatively brief duration of high-pressure/high-temperature metamorphism and rapid cooling and exhumation of the Gf?hl terrane may be a consequence of lithospheric delamination during Early Carboniferous collision of Bohemia (Teplá-Barrandia) and Moldanubia (Franke, 2000).     

Alteration, evaluation and use of extremaduran granite residues

The necessity of eliminating debris from a granite quarry has awakened an interest in applications of by-products, called “marginal arids”, in different fields, like construction and foundations for roadways, restoration, material for the manufacture of artificial rocks, and artesian products etc. Conclusions obtained from the results of tests carried out by X-ray diffraction of granite quarry by-products in Extremadura, Spain, submitted to different treatments, are established. Test pieces from two quarries are analyzed and compared generally and specifically, for commercial use. Finally, conclusions relating to essays in test pieces and mineral dynamics of marginal arid granite are exposed.     

Metal sources of the Navan carbonate-hosted base metal deposit, Ireland: Nd and Sr isotope evidence for deep hydrothermal convection

Nd and Sr isotope analyses are presented for gangue mineral samples from the giant carbonate-hosted Navan Zn–Pb deposit, Ireland, and for rocks from which Navan metals may have been derived. Analysis of gangue minerals spanning the Navan paragenetic sequence reveals systematic evolution in the composition of the mineralising fluid. Early fluid represented by replacive dolomite exhibits the lowest initial ⁸⁷Sr/⁸⁶Sr ratio (0.7083–0.7086), closest to that of the host limestone and to Lower Carboniferous seawater, and the highest ¹⁴³Nd/¹⁴⁴Nd ratio (0.51161–0.51176). Later generations of dolomite, barite and calcite, which encompass sulphide precipitation, have higher initial ⁸⁷Sr/⁸⁶Sr ratios (maximum 0.7105) and lower initial ¹⁴³Nd/¹⁴⁴Nd ratios (minimum 0.51157). All samples have initial Nd isotope ratios that are too low to have been acquired only from the host limestone. Drill core samples of presumed Ordovician volcanic and sedimentary rocks from beneath the Navan orebody have ¹⁴³Nd/¹⁴⁴Nd and ⁸⁷Sr/⁸⁶Sr ratios at the time of mineralisation of 0.51184–0.51217 and 0.7086–0.7138, respectively. The data are interpreted to indicate mixing of sulphide-rich, limestone-buffered brine, with a metal-bearing hydrothermal fluid, which had passed through sub-Carboniferous rocks, consistent with published fluid inclusion and S isotope data. The ¹⁴³Nd/¹⁴⁴Nd ratio of this basement-derived fluid is too low to have been imparted by flow through the Devonian Old Red Sandstone, as required in models of regional fluid flow in response to Hercynian uplift. Irrespective of whether such regional fluid flow occurred, the hydrothermal Nd must have been derived from sub-Devonian rocks. These conclusions broadly support the hydrothermal convection cell model in which brines, ultimately of surface origin, penetrated to a depth of several kilometres, leaching metals from the rocks through which they passed. The data also support increasing depth of penetration of convection cells with time. Metals were subsequently precipitated in carbonate rocks at sites of mixing with cooler, sulphide-rich fluids. However, comparison of the Navan hydrothermal gangue Nd–Sr isotope data with data from Lower Palaeozoic rocks strongly suggests that the latter cannot alone account for the “basement” signature. As the Navan deposit lies immediately north of the Iapetus Suture, this suggests that the Laurentian margin includes Precambrian basement.     

The effect of composition and cation ordering on the compressibility of columbites up to 7 GPa

The unit-cell parameters of two columbite samples along the (Fe,Mn)Nb₂O₆ solid solution were measured by means of high-pressure single-crystal X-ray diffraction up to pressures of 7 GPa. The compressional behaviour of these minerals was studied as a function of composition and degree of order. The P–V data of all the samples were fitted with a third-order Birch–Murnaghan equation of state. For the two samples with different compositions but identical degree of order the substitution of Mn for Fe causes a decrease of the bulk modulus K _T0, from 153(1) to 146(1) GPa, without any effect on the pressure first derivative K′. For the two samples with the same composition, cation ordering causes an increase of the bulk modulus from 149(1) to 153(1) GPa and of the pressure first derivative from 4.1(2) to 4.8(3). The compressional behaviour is anisotropic with a linear axial compressibility scheme β _b > β _c ≥ β _a for all samples, regardless of composition and degree of order. Such anisotropy increases sligthly with increasing Mn content.     

P–T evolution and reaction textures in retrogressed eclogites from Svetlik, the Moldanubian Zone (Czech Republic)

Summary Lenses and pods of mafic rocks from the Monotonous Unit near Svetlik are characterized by eclogite facies mineral assemblages; however some inclusion patterns (oriented quartz rods in clinopyroxene and cuboids of disordered graphite in garnet) that are usually known from ultra-high pressure rocks were also observed in one sample. Conventional thermobarometry yielded maximum P–T conditions of 2.0–2.5 GPa and 750 °C. Decompression and heating at amphibolite and granulite facies conditions resulted in the formation of at least five distinct types of symplectites. These include symplectitic intergrowth of ilmenite and clinopyroxene after titanite, described here for the first time from the Moldanubian Zone. In addition, symplectites of plagioclase and biotite with accessory amounts of spinel after tabular pseudomorphs (after phengite?) are also reported here. Mass balance relations indicate that symplectites of diopside + plagioclase after omphacite and plagioclase + spinel (sapphirine) after kyanite + garnet, formed by nearly isochemical reactions. All other symplectite-forming reactions were allochemical and were accelerated by the presence of fluid in the primary phases. Preserved zoning pattern in garnet with high compositional gradient in some samples suggests that the rocks were affected briefly by granulite facies overprint.     

Fan beheading and drainage diversion as evidence of a 3200-2800 BP earthquake event in the Esmeraldas-Tumaco seismic zone: A case study for the effects of great subduction earthquakes

The San Lorenzo area belongs to the Esmeraldas–Tumaco seismic zone where some of the strongest earthquakes of South America occurred during the 20th century. This paper provides evidence for a succession of geomorphic changes characterized by the disruption of the Quaternary drainage network and the reshaping of the Cayapas–Santiago estuary. The rise of the La Boca uplift bordered by the La Boca and San Lorenzo faults is responsible for the southward diversion of the Palabi, Tululbi, Bogotá and Carolina rivers toward the Santiago and Cayapas rivers. The increase of the discharge directed to the Cayapas River generated the change of the channel pattern downstream from the confluence, and the avulsion of a new estuary through the coastal plain. According to the dating of beach ridges the avulsion occurred in the period 3200–2800 BP. This period corresponds also to a faster accretion of the beach ridge margin, interpreted as a response to a small uplift of the shore. The coherency of the three morphologic evidences—diversion of drainage network, avulsion and increase of coastal accretion—suggest a unique morphotectonic event, in relation with the activity of the Esmaraldas–Tumaco seismic zone. The opening of a direct communication through the mangrove margin may have brought favorable conditions for the development of the La Tolita archaeological site after 3000 BP.     

The 1786 earthquake-triggered landslide dam and subsequent dam-break flood on the Dadu River, southwestern China — Reply

A short reply to discussion by Chanson.