Changes in water chemistry along the newly formed High Arctic fluvial–lacustrine system of the Brattegg Valley (SW Spitsbergen,Svalbard)

Changes in water chemistry along the High Arctic fluvial–lacustrine system located in Wedel Jarlsberg Land in the SW Spitsbergen (Svalbard) were investigated during the summer season of 2010 and 2011. The newly formed river–lake system consists of three lakes connected with the Brattegg River. The first bathymetric measurements of these lakes were made by the authors in 2010. The Brattegg River catchment represents a partly glaciered Arctic water system. The studied lakes are characterized by low mineralization and temperature of water. The value of the electrolytic conductivity (EC) ranges from 30.2 to 50.5 μS cm^?1 and the temperature of surface water from 1.5 to 7.8 °C. The temperature increase takes place downstream starting from Upper Lake to the outflow from Myrktjørna Lake. The waters of lakes have higher temperatures than the stream. The predominant ions are HCO₃ ^? (up to 16.5 mg L^?1), Cl^? (6.66–8.53 mg L^?1), Ca²⁺ (2.40–4.45 mg L^?1) and Na⁺ (2.65–3.36 mg L^?1). The highest values of ammonium and DOC found in the lowest Myrktjørna Lake seem to be related to the presence of aquatic organisms and also birds. From the group of 10 analyzed microelements, increased concentrations of aluminum, up to almost 500 μg L^?1, are present in the lakes’ water. Water isotopic composition ranges for δ¹⁸O and δ²H, from ?10.6 to ?10.9‰ and from ?70.8 to ?72.3‰, respectively. The vertical zonality of lake waters is manifested in a decrease in the temperature and increase in EC and chemical elements concentrations.     

Ilmenite composition in the Tellnes Fe–Ti deposit,SW Norway: fractional crystallization,postcumulus evolution and ilmenite–zircon relation

Major and trace element XRF and in situ LA-ICP-MS analyses of ilmenite in the Tellnes ilmenite deposit, Rogaland Anorthosite Province, SW Norway, constrains a two stage fractional crystallization model of a ferrodioritic Fe-Ti-P rich melt. Stage 1 is characterized by ilmenite-plagioclase cumulates, partly stored in the lower part of the ore body (Lower Central Zone, LCZ), and stage 2 by ilmenite-plagioclase-orthopyroxene-olivine cumulates (Upper Central Zone, UCZ). The concentration of V and Cr in ilmenite, corrected for the trapped liquid effect, (1) defines the cotectic proportion of ilmenite to be 17.5 wt% during stage 1, and (2) implies an increase of D _V^Ilm during stage 2, most likely related to a shift in fO₂. The proportion of 17.5 wt% is lower than the modal proportion of ilmenite (ca. 50 wt%) in the ore body, implying accumulation of ilmenite and flotation of plagioclase. The fraction of residual liquid left after crystallization of Tellnes cumulates is estimated at 0.6 and the flotation of plagioclase at 26 wt% of the initial melt mass. The increasing content of intercumulus magnetite with stratigraphic height, from 0 to ca. 3 wt%, results from differentiation of the trapped liquid towards magnetite saturation. The MgO content of ilmenite (1.4–4.4 wt%) is much lower than the expected cumulus composition. It shows extensive postcumulus re-equilibration with trapped liquid and ferromagnesian silicates, correlated with distance to the host anorthosite. The Zr content of ilmenite, provided by in situ analyses, is low (<114 ppm) and uncorrelated with stratigraphy or Cr content. The data demonstrate that zircon coronas observed around ilmenite formed by subsolidus exsolution of ZrO₂ from ilmenite. The U-Pb zircon age of 920 ± 3 Ma probably records this exsolution process. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Monitoring of Snow Cover Variability in Chenab Basin Using IRS AWiFS Sensor

Monitoring of seasonal snow cover is important for many applications such as melt runoff estimation, climate change studies and strategic requirements. Contribution of seasonal snow melt runoff of Chenab River is significant and important to meet hydrological requirement at foothills. Seasonal snow cover of Chandra, Bhaga, Miyar, Bhut, Warwan and Ravi, six major tributaries of Chenab River, becomes crucial to assess the water availability. In addition, altitudinal distribution of snow cover significantly influences the melt runoff which is highly sensitive to minor variations in atmospheric temperature. In this investigation, remote sensing based Normalized Difference Snow Index technique has been used to generate 10 daily snow cover product. Snow cover monitoring of all the sub-basins were carried out for 10 years from 2004–2005 to 2013–2014 during hydrological year (October to June) using Advanced Wide Field Sensor (AWiFS) of Indian remote sensing satellite (IRS). Accumulation and ablation patterns of snow cover have also been analyzed for the six sub-basins. Accumulation and ablation pattern of snow cover, from 2004 to 2014 which shows slightly increasing trend for all the sub-basins. Meteorological data of Kelong at Bhaga sub-basin was also analysed. Average monthly snow line altitude was estimated for all the sub-basins using hypsographic curve. Chandra and Bhaga sub-basins are at higher altitude and Ravi sub-basin is at lower altitude. It was also observed that areal extent of snow reaches to lower altitude during last 5 years, particularly in Ravi sub-basin.     

Time domain method for calculating free field motion of a layered half-space subjected to obliquely incident body waves

In numerical simulation of wave scattering under oblique incident body waves using the finite element method, the free field motion at the incident lateral boundary induced by the background layered half-space complicates the computational area. In order to replace the complex frequency domain method, a time-domain method to calculate the free field motion of a layered half-space subjected to oblique incident body waves is developed in this paper. The new method decouples the equations of motion used in the finite element method and offers an interpolation formula of the free field motion. This formula is based on the fact that the apparent horizontal velocity of the free field motion is constant and can be calculated exactly. Both the theoretical analysis and numerical results demonstrate that the proposed method offers a high degree of accuracy.     

Observations of polar patches generated by solar wind Alfvén wave coupling to the dayside magnetosphere

A long series of polar patches was observed by ionosondes and an all-sky imager during a disturbed period (K_p = 7- and IMF B_z <0). The ionosondes measured electron densities of up to 9 × 10¹¹ m⁻³ in the patch center, an increase above the density minimum between patches by a factor of ≈4.5. Bands of F-region irregularities generated at the equatorward edge of the patches were tracked by HF radars. The backscatter bands were swept northward and eastward across the polar cap in a fan-like formation as the afternoon convection cell expanded due to the IMF B_y > 0. Near the north magnetic pole, an all-sky imager observed the 630-nm emission patches of a distinctly band-like shape drifting northeastward to eastward. The 630-nm emission patches were associated with the density patches and backscatter bands. The patches originated in, or near, the cusp footprint where they were formed by convection bursts (flow channel events, FCEs) structuring the solar EUV-produced photoionization and the particle-produced auroral/cusp ionization by segmenting it into elongated patches. Just equatorward of the cusp footprint Pc5 field line resonances (FLRs) were observed by magnetometers, riometers and VHF/HF radars. The AC electric field associated with the FLRs resulted in a poleward-progressing zonal flow pattern and backscatter bands. The VHF radar Doppler spectra indicated the presence of steep electron density gradients which, through the gradient drift instability, can lead to the generation of the ionospheric irregularities found in patches. The FLRs and FCEs were associated with poleward-progressing DPY currents (Hall currents modulated by the IMF B_y) and riometer absorption enhancements. The temporal and spatial characteristics of the VHF backscatter and associated riometer absorptions closely resembled those of poleward moving auroral forms (PMAFs). In the solar wind, IMP 8 observed large amplitude Alfvén waves that were correlated with Pc5 pulsations observed by the ground magnetometers, riometers and radars. It is concluded that the FLRs and FCEs that produced patches were driven by solar wind Alfvén waves coupling to the dayside magnetosphere. During a period of southward IMF the dawn-dusk electric field associated with the Alfvén waves modulated the subsolar magnetic reconnection into pulses that resulted in convection flow bursts mapping to the ionospheric footprint of the cusp.     

Present-day Horizontal Mobility in the Serbian Part of the Pannonian Basin; Inferences from the Geometric Analysis of Deformations

In tectonically complex environments, such as the Pannonian Basin surrounded by the Alps–Dinarides and Carpathians orogens, monitoring of recent deformations represents very challenging matter. Efficient quantification of active continental deformations demands the use of a multidisciplinary approach, including neotectonic, seismotectonic and geodetic methods. The present-day tectonic mobility in the Pannonian Basin is predominantly controlled by the northward movement of the Adria micro-plate, which has produced compressional stresses that were party accommodated by the Alps-Dinarides thrust belt and partly transferred towards its hinterland. Influence of thus induced stresses on the recent strain field, deformations and tectonic mobility in the southern segment of the Pannonian Basin has been investigated using GPS measurements of the horizontal mobility in the Vojvodina area (northern Serbia).     

Seismic prediction method of multiscale fractured reservoir

Common prestack fracture prediction methods cannot clearly distinguish multiplescale fractures. In this study, we propose a prediction method for macro- and mesoscale fractures based on fracture density distribution in reservoirs. First, we detect the macroscale fractures (larger than 1/4 wavelength) using the multidirectional coherence technique that is based on the curvelet transform and the mesoscale fractures (1/4–1/100 wavelength) using the seismic azimuthal anisotropy technique and prestack attenuation attributes, e.g., frequency attenuation gradient. Then, we combine the obtained fracture density distributions into a map and evaluate the variably scaled fractures. Application of the method to a seismic physical model of a fractured reservoir shows that the method overcomes the problem of discontinuous fracture density distribution generated by the prestack seismic azimuthal anisotropy method, distinguishes the fracture scales, and identifies the fractured zones accurately.     

Restrain of a seismically isolated bridge by external stoppers

The current design of seismically isolated bridges usually combines the use of bearings and stoppers, as a second line of defence. The stoppers allow the development of the in-service movements of the bridge deck, without transmitting significant loads to the piers and their foundations, while during earthquake they transmit the entire seismic action. Despite the fact that stoppers, which restrain the transverse seismic movements of the deck, are used frequently in seismically isolated bridges, the use of longitudinal stoppers is relatively rare, mainly due to the large in-service constraint movements of bridges. The present paper proposes a new type of external longitudinal stoppers, which are installed in stiff sub-structures-boundaries, aiming at limiting the bridge seismic movements. The parametric investigation, which was conducted in order to identify the seismic efficiency of the external stoppers, showed that the interaction of the bridge with the stiff boundaries can lead to significant reductions in the seismic movements of the bridge. Serviceability is appropriately arranged in the paper by expansion joints and approach slabs.     

Biogeochemical Modelling of a Seasonally Anoxic Lake: Calibration of Successive and Competitive Pathways and Processes in Lake Aydat,France

A reactive transport model was developed to describe seasonal variations of biogeochemical and physical processes in Lake Aydat. The model includes physical processes such as vertical mixing, sedimentation and advection related to inflows into the lake and biogeochemical conversion processes in the water column and in the sediment surface layer. The reactions described in the model include primary redox reactions such as primary production, aerobic and anaerobic respiration, methanogenesis and secondary reactions established between oxidants and reducers produced by the primary reactions. After adjusting various kinetic constants, the model reasonably reproduced the main features of seasonal variations of dissolved oxygen and nitrate depth profiles and pH. The reactive transport model was also used to quantify the relative importance of different biogeochemical pathways. For instance, ferrous denitrification seems to play an important role when stratification is increasing.