A Classification of Hypersaline Waters, Based on Trophic Criteria

Abstract. A classification of hypersaline waters is proposed on the basis of the food chain structure of their biota. Four steps of increasing salinity and respective shortening of the food-chains are recognized, respectively named: alpha-, beta-, gamma- and delta-hypersaline waters.
Some general aspects, dealing with cosmopolitism of the biota, production, competition and benthic ecology in hypersaline waters are discussed.
The relevance of ecological studies in hypersaline waters to theoretical ecology and to the new technological uses of saline waters is briefly mentioned.     

Robust and adaptive path following for underactuated autonomous underwater vehicles

This paper proposes a nonlinear robust adaptive control strategy to force a six degrees of freedom underactuated underwater vehicle with only four actuators to follow a predefined path at a desired speed despite of the presence of environmental disturbances and vehicle’s unknown physical parameters. The proposed controller is designed using Lyapunov’s direct method, the popular backstepping and parameter projection techniques. The closed loop path following errors can be made arbitrarily small. Interestingly, it is shown that our developed control strategy is easily extendible to situations of practical importance such as parking and point-to-point navigation. Numerical simulations are provided to illustrate the effectiveness of the proposed methodology.     

Comparison of the biology, dynamics, and secondary production of Talorchestia brito (Amphipoda, Talitridae) in Atlantic (Portugal) and Mediterranean (Tunisia) populations

The biology, population dynamics, and production of Talorchestia brito were studied at two sandy beaches located on the Atlantic (Portugal) and on the Mediterranean (Tunisia) coasts, respectively. The seasonal variation in abundance and the overall densities were similar in both populations. Reproduction occurred from February to September in the Atlantic, and from March to early November in the Mediterranean. The sex ratio was male biased in the Atlantic, and female biased in the Mediterranean. Based on data from the Atlantic population, both abundance and the proportion of reproductive females were positively correlated with temperature, while the proportion of juveniles in the population was positively correlated with temperature and sediment moisture. On average, individuals from the Atlantic were larger than the ones from the Mediterranean. Life span was estimated at six to nine months in the Atlantic, and five to eight months in the Mediterranean. Talorchestia brito was shown to be a semiannual species, with iteroparous females producing two broods per year, and exhibited a bivoltine life cycle. The minimum age required for males' and females' sexual differentiation and for female sexual maturation was shorter in the Mediterranean. Growth production (P) was estimated at 0.19 g m⁻² y⁻¹ ash free dry weight (AFDW; 4.3 kJ m⁻² y⁻¹) in the Atlantic population, and 0.217 g m⁻² y⁻¹ AFDW (4.9 kJ m⁻² y⁻¹) in the Mediterranean one. Elimination production (E) was estimated at 0.35 g m⁻² y⁻¹ AFDW (7.9 kJ m⁻² y⁻¹) in the Atlantic, and 0.28 g m⁻² y⁻¹ AFDW (6.3 kJ m⁻² y⁻¹) in the Mediterranean. The average annual biomass ( ) (standing stock) was estimated at 0.032 g m⁻² in the Atlantic beach, and 0.029 g m⁻² in the Mediterranean one, resulting, respectively, in ratios of 5.9 and 7.5 and ratios of 10.8 and 9.6. Like other talitrids, T. brito exhibited geographic variation in morphometrical characteristics, sex ratio, growth rates, life span, and reproduction period, with the Atlantic population presenting a slower life history.     

Susceptibility to genetic damage and cell types in Mediterranean mussels

Micronucleus (MN) frequency is generally accepted as a marker of chromosomal damage and has been studied in a variety of cells and species. In previous work, we detected significant dose-related MN increases in the epithelial-like gill cells and agranular haemocytes of Mytilus galloprovincialis treated with benzo[a]pyrene, a well-known mutagenic pollutant. In addition, we have studied micronuclei and other nuclear abnormalities in mussels collected from the Venice lagoon (Italy). Frequency changes, possibly related to genotoxic/toxic stress, in both granular and micronucleated cells from gills and haemolymph, were detected. Environmental data suggest the effect of genotoxic pollutants and the importance of cell replication in the interpretation of micronucleus frequencies.     

Evaluation of long-term extreme response statistics of jack-up platforms

This paper is concerned with the models appropriate for the dynamic assessment of jack-ups, concentrating particularly on the long-term response due to random ocean waves and on work-hardening plasticity models used for spud-can response. A methodology for scaling of short-term statistics, calculated using a Constrained NewWave technique, is shown in a numerical experiment for an example jack-up and central North Sea location. The difference in long-term extreme response statistics due to various footing assumptions is emphasised. Results for two environmental load conditions are described (one excluding and one including wind and current effects) and the role of sea-state severity in the variation of short-term extreme response statistics is also highlighted.     

Prediction of hydrodynamic loading on a mini TLP with free surface effects

This paper describes the extension of a fluid-flow simulations method to capture the free surface evolution around a full-scale Tension Leg Platform (TLP). The focus is on the prediction of the resulting hydrodynamic loading on the various elements of the TLP in turbulent flow conditions and, in particular, on quantifying the effects of the free surface distortion on this loading. The basic method uses finite-volume techniques to discretize the differential equations governing conservation of mass and momentum in three dimensions. The time-averaged forms of the equations are used, and the effects of turbulence are accounted for by using a two-equation, eddy-viscosity closure. The method is extended here via the incorporation of surface-tracking algorithm on a moving grid to predict the free-surface shape. The algorithm was checked against experimental measurements from two benchmark flows: the flow over a submerged semi-circular cylinder and the flow around a floating parabolic hull. Predictions of forces on a model TLP were then obtained both with and without allowing for the deformation of the free surface. The results suggest that the free surface effects on the hydrodynamic loads are small for the values of Froude number typically encountered in offshore engineering practice.     

Filters for linear sea-wave prediction

Deterministic sea-wave prediction (DSWP) models are appearing in the literature designed for quiescent interval prediction in marine applications dominated by large swell seas. The approach has focused upon spectral methods which are straightforward and intuitively attractive. However, such methods have the disadvantage that while the sea is aperiodic in nature, the standard discrete spectral processing techniques force an absolutely periodic structure onto the resulting sea surface prediction models. As it is the shape of the sea surface that is important in such applications, particularly near the end of the domain which is important, the standard windowing techniques used in signal processing work to reduce leakage artifacts cannot be employed. This has necessitated the use of end matching methods that can be both inconvenient and may reduce the fraction of the time for which legitimate predictions are available. As a result, an investigation has been undertaken of the use of finite impulse response prediction filters to provide the necessary dispersive phase shifting required in DSWP systems. The present work examines the theoretical basis for such filters and explores their properties together with their application to both long and short crested swell seas. It is shown that wide band forms of such filters are only convergent in the sense of distributions having both infinite duration impulse responses and asymptotically divergent first derivatives. However, appropriate band limitation can produce useful finite impulse responses allowing implementation via standard discrete convolution methods. It is demonstrated that despite the prediction filters having a non-causal impulse response such filters can be used in practice due to a combination of the asymmetric nature of the impulse response and the fundamental nature of the prediction process. The findings are confirmed against actual sea-wave data.     

Cross-Calibration and Long-Term Monitoring of the Microwave Radiometers of ERS, TOPEX, GFO, Jason, and Envisat

The radiometers on board the satellites ERS-1, TOPEX/Poseidon, ERS-2, GFO, Jason-1, and Envisat measure brightness temperatures at two or three different frequencies to determine the total columnal water vapor content and wet tropospheric path delay, a major correction to the altimeter range measurements. In order to asses the long-term stability of the path delay, the radiometers are calibrated against vicarious cold and hot references, against each other, and against several atmospheric models. Four of these radiometers exhibit significant drifts in at least one of the channels, resulting in yet unmodeled errors in path delay of up to 1 mm/year, thus limiting the accuracy at which global sea level rise can be inferred from the altimeter range measurements.     

Ultimate strength of ship hulls under torsion

For a ship hull with large deck openings such as container vessels and some large bulk carriers, the analysis of warping stresses and hatch opening deformations is an essential part of ship structural analyses. It is thus of importance to better understand the ultimate torsional strength characteristics of ships with large hatch openings. The primary aim of the present study is to investigate the ultimate strength characteristics of ship hulls with large hatch openings under torsion. Axial (warping) as well as shear stresses are normally developed for thin-walled beams with open cross sections subjected to torsion. A procedure for calculating these stresses is briefly described. As an illustrative example, the distribution and magnitude of warping and shear stresses for a typical container vessel hull cross section under unit torsion is calculated by the procedure. By theoretical and numerical analyses, it is shown that the influence of torsion induced warping stresses on the ultimate hull girder bending strength is small for ductile hull materials while torsion induced shear stresses will of course reduce the ship hull ultimate bending moment.