Hydrogeology and sustainable future groundwater abstraction from the Agua Verde aquifer in the Atacama Desert,northern Chile

The hyper-arid conditions prevailing in Agua Verde aquifer in northern Chile make this system the most important water source for nearby towns and mining industries. Due to the growing demand for water in this region, recharge is investigated along with the impact of intense pumping activity in this aquifer. A conceptual model of the hydrogeological system is developed and implemented into a two-dimensional groundwater-flow numerical model. To assess the impact of climate change and groundwater extraction, several scenarios are simulated considering variations in both aquifer recharge and withdrawals. The estimated average groundwater lateral recharge from Precordillera (pre-mountain range) is about 4,482 m³/day. The scenarios that consider an increase of water withdrawal show a non-sustainable groundwater consumption leading to an over-exploitation of the resource, because the outflows surpasses inflows, causing storage depletion. The greater the depletion, the larger the impact of recharge reduction caused by the considered future climate change. This result indicates that the combined effects of such factors may have a severe impact on groundwater availability as found in other groundwater-dependent regions located in arid environments. Furthermore, the scenarios that consider a reduction of the extraction flow rate show that it may be possible to partially alleviate the damage already caused to the aquifer by the continuous extractions since 1974, and it can partially counteract climate change impacts on future groundwater availability caused by a decrease in precipitation (and so in recharge), if the desalination plant in Taltal increases its capacity.     

Effectiveness of Mg–Al-layered double hydroxide for heavy metal removal from mine wastewater and sludge volume reduction

Health hazards from heavy metal pollution in water systems are a global environmental problem. Of similar concern is sludge that results from wastewater treatment due to unsatisfactory sludge management technology. Therefore, the effectiveness of using Mg–Al-layered double hydroxide in the removal of heavy metals from mine wastewater was tested and compared with that of calcium hydroxide [Ca(OH)₂], which is a common treatment method for heavy metal removal. Initially, the mine wastewater contained cations of the heavy metals iron (Fe), zinc (Zn), copper (Cu), and lead (Pb). The Mg–Al-layered double hydroxides were able to remove 371, 7.2, 121, and 0.4 mg/L of these pollutants, respectively, using the co-precipitation method. The removal of these metals is most effective using 0.5 g Mg–Al-layered double hydroxide (Mg/Al molar ratio 4) and 20 min of shaking. Zn was removed by the formation of Zn(NO₃)(OH)·H₂O and Zn₅(NO₃)₂(OH)₈ when LDH, Mg/Al molar ratios of 4 and 2, respectively, were used. Similarly, Fe, Cu, and Pb were removed by the formation of Fe–Al-layered double hydroxide, Cu₂(OH)₃·NO₃ and Pb₄(OH)₄(NO₃)₄, respectively. While Ca(OH)₂ is also capable of reducing the heavy metal concentrations below the Japanese recommended values, this analysis shows that using 0.5 g Mg–Al-layered double hydroxide is a better treatment condition for mine wastewater, because it generates lower sludge volumes than 0.1 g of Ca(OH)₂. The measured sludge volume was 1.5 mL for Mg–Al-layered double hydroxide and 2.5 mL for Ca(OH)₂, a nearly twofold further reduction.     

Hydrogeochemical effects of secondary forest in Guangxi Nongla karst areas in China

Rainfall, throughfall, stemflow and spring were studied in a secondary forest during a wet season from April to August in 2006. Some of the chemicals in throughfall, stemflow and spring were increased in contrast with incident rainfall. Specifically, Cl⁻, HCO₃ ⁻, Na⁺ and Ca²⁺ were leached negatively in throughfall, but K⁺ and Mg²⁺ were leached positively. In stemflow, Cl⁻ and Na⁺ were leached negatively, the others were leached positively and their concentrations were higher than those in throughfall. Total carbon, organic carbon and inorganic carbon in throughfall and stemflow were increased as rainfall went through the secondary forest. The concentration of free CO₂ in rainfall was lower than both, throughfall and stemflow; the relationship between total acidity and free CO₂ was linear. pH of throughfall and stemflow , such as maximum, minimum and mean, were lower than that of rainfall and the extent of pH in spring was changed minimally. We came to a conclusion that rainfall via the secondary forest can lead to further erosion, accelerate the biogeochemical cycle in epikarst zone, enhance the effective state of alkali elements in the soil, supply vegetation with more nutrients and advance vegetation’s growth and succession, which are reasonably sufficient to form a stable karst ecosystem.     

A simplified analytical model for run-out prediction of flow slides in municipal solid waste landfills

Flow slides in municipal solid waste (MSW) landfills are common geoenvironmental issues in the urban environment and can pose a serious threat to the surrounding population and infrastructure. Prediction of the maximum run-out distance of flow slides in MSW landfills is therefore an essential part of hazard and risk assessment in engineering design. Based on the framework for simple analysis originally developed by Hungr (1995), we propose a simplified analytical model for calculating dam breaks in a plastic fluid along a single inclined base. In the proposed model, a quarter-elliptical shape is used to describe the approximate configuration of the flow slide. Following this step, the physical laws relating to the conservation of mass and energy are used to calculate the potential flow. Of additional note is a boundary condition in mathematics relating to this simplified analytical model, which is also reported in this study. Taking the obvious mobility characteristics of the MSW at point of failure into consideration, a three-phase simplified model along double inclined bases has been further developed for run-out prediction of the flow slide in MSW landfill. The proposed three-phase model is then applied to estimate the maximum run-out distance of two typical flow failures of landfills located in Sarajevo and Bandung, which demonstrate the capability of the proposed simplified analytical model for use in hazard assessments of landfills.     

Heavy metals in sediments of the Tecate River, Mexico

Ten sites along the Tecate River, Mexico were sampled to evaluate the cadmium, lead, nickel and chromium concentrations in sediments. The result shows contamination for cadmium in most of the sites, where two sites were class 4 (polluted to strongly polluted) according to geoaccumulation index proposed by Muller. Two sites were found polluted for all the heavy metals analyzed (Cr, Cd, Pb and Ni), indicating the effect of anthropogenic activities. A correlation between Ni and Cd concentration had been found indicating a common source. These metals are usually used in electroplating industry. The results of this study can be used for decision makers to prioritize measures to control the pollution for these metals.     

Successional stages of biological soil crusts and their microstructure variability in Shapotou region (China)

In order to investigate succession of biological soil crusts (BSCs) and their microstructure variability, we conducted this work in Shapotou revegetation region at the southeast edge of Tengger Deser. The results showed that BSCs generally succeeded as a pathway of “Algae crusts, algae–lichen crusts, lichen crusts, lichen–moss crusts and moss crusts”. Occasionally mosses directly occurred on algae crusts, and BSCs succeeded from algae crusts to moss crusts. Crust vertical stratification was a common phenomenon, from top to bottom an inorganic layer, algae-dense layer and algae-sparse layer were divided in algae crusts; a thallus layer, rhizoid layer and sub-rhizoid layer in lichen crusts; a “stem-leaf” layer, rhizoid layer and sub-rhizoid layer in moss crusts, respectively. The main crust binding organisms varied from filamental cyanobacteria (dominated by Microcoleus) in algae crusts to lichen rhizoids, free-living cyanobacterial filaments and fungal hyphaes in lichen crusts, and to moss rhizoids and fungal hyphaes in moss crusts. The dominant phototrophic organisms varied from Microcoleus (algae) in algae crusts to Collema (lichens) in lichen crusts, and to Bryum (or Didymodon and Tortula; mosses) in moss crusts. Total phototrophic biomass increased while the free-living algal biomass decreased with the succession of BSCs. In addition, exopolysaccharides and fine particles accumulated in the course of development and succession of BSCs, all of which lead to a gradual increase in crust thickness and porosity, while decrease in the bulk density.     

Adsorption characteristics of perchloroethylene in natural sandy materials with low organic carbon content

Laboratory batch tests were conducted to investigate the sorption isotherms and sorption kinetics of the chlorinated hydrocarbon perchloroethylene (PCE) in five natural sandy materials with an organic carbon content (f _oc) in the range 0.080–0.540%. The amended non-linear dual-mode model can describe the sorption isotherms in materials with f _oc in the range 0.080–0.090%. For a sample with a much higher f _oc of 0.54%, the absorption isotherm was found to fit a linear model. These results may indicate that organic carbon is not the main factor influencing the sorption isotherm. The sorption kinetics of PCE in samples with f _oc in the range 0.080–0.090% are not first-order and are different from those observed in the samples with higher f _oc. The sorption process in the materials with lower f _oc involves fast sorption, fast desorption and an equilibrium stage. The results may imply that the factors affecting sorption kinetics of PCE in low f _oc media are pore filling and capillary condensation rather than organic carbon content.     

Land subsidence caused by groundwater exploitation in Suzhou City,China

Suzhou City, located at the lower reaches of the Yangtze River in southeastern Jiangsu Province, is one of the few cities in China which suffer from severe ground settlement. A research project was carried out to investigate this problem. Geological and hydrogeological studies show that there is a multi-layered aquifer system with three distinct, soft mud layers of marine and lagoonal origins. An examination of historical records of groundwater extraction, water levels, and ground settlement shows that the ground subsidence is associated with the continuously increasing groundwater extraction in the deep, confined aquifer. It is believed that the consolidation of the soft mud layers, especially the third layer which is thick and close to the main pumped aquifer, contributes to the ground settlement. A three-dimensional finite difference numerical model representing the multi-layered aquifer system was developed to study the ground settlement in response to groundwater extraction. By calibrating the model with both the measured groundwater level and ground settlement, the aquifer parameters were estimated. The model outputs fit reasonably well with the observed results, which indicates that the numerical model can reproduce the dynamic processes of both groundwater flow and soil consolidation. The hydraulic conductivity of the third mud layer near the center of the ground settlement has been reduced by over 30% in the last 14 years. The gradual deterioration in the hydraulic conductivity of the mud may have significant adverse effect on the sustainable groundwater resource of the deep confined aquifer, since the recharge from the shallow aquifers through the mud layer is the only source of water to the deep aquifer. An analysis of the spatial distributions of groundwater drawdown and ground settlement shows that the area with maximum drawdown is not necessarily the area with maximum ground settlement due to the occurrence of the soft mud layer. A simple reallocation in pumping rates on the basis of the spatial distribution of the thick mud layer could significantly reduce the ground settlement. Electronic Publication     

Factors controlling the development of prism faces in granite zircons: a microprobe study

Based on microprobe work, we present arguments that the size relations of the two common prisms {100} and {110} of accessory granite zircons are strongly influenced by chemical factors. Magmatic growth zoning patterns, which we have studied by means of backscattered electron imaging in special zircon sections orientated perpendicular to the c-axis, do not support previous models which assumed temperature or the degree of ZrSiO₄ supersaturation to be the primary prism-form-directing factors. The element U, which usually occupies the Zr-sites of granite zircoms to some degree, is strongly suspected of producing an (adsorptive) growth-blocking effect for {110}-type faces thus creating crystals with {110}-dominated prism morphology. A second independent mechanism that is likely to form zircons with large {110} prisms is the common substitution Zr⁴⁺+Si⁴⁺ versus Y(REE) and P contents (relative to Zr) are, according to our model, predestinated to produce zircons with large {100} prisms and vice versa.Dedicated to Prof. Günther Frasl on the occasion of his seventieth birthday     

Occurrence of wagnerite in Mg–Al granulites of Sonapahar,Meghalaya

We report for the first time the occurrence of rare phosphate wagnerite as a stable phase from the Mg–Al granulites of Sonapahar. The wagnerite bearing assemblages consist of the spinel, phlogopite, brucite and corundum. The wagnerite appears in the Mg–Al granulites due to the break-down of spinel and fluorapatite. The mineral chemistry of the phases has been discussed from the EPMA data, which reveals that the fluorine content of the wagnerite is relatively low due to the exchange of F to coexisting phases. The major oxide analysis of the rocks show the low content of Ca, which is the requisite for the occurrences of wagnerite.