GGM02 – An improved Earth gravity field model from GRACE

A new generation of Earth gravity field models called GGM02 are derived using approximately 14 months of data spanning from April 2002 to December 2003 from the Gravity Recovery And Climate Experiment (GRACE). Relative to the preceding generation, GGM01, there have been improvements to the data products, the gravity estimation methods and the background models. Based on the calibrated covariances, GGM02 (both the GRACE-only model GGM02S and the combination model GGM02C) represents an improvement greater than a factor of two over the previous GGM01 models. Error estimates indicate a cumulative error less than 1 cm geoid height to spherical harmonic degree 70, which can be said to have met the GRACE minimum mission goals. Electronic Supplementary Material Supplementary material is available in the online version of this article at     

Dynamic survey of architectural heritage by high-speed microwave interferometry

The authors propose the use of a high-speed interferometric radar for remotely measuring both transient displacements and steady-state vibrations of architectural heritage structures in order to test their stability conditions. Demonstrative results of application of the technique to a prominent cultural heritage artwork, the tower of Giotto in Florence, Italy, are reported.     

Boreal forest transmissivity in the microwave domain using ground-based measurements

This letter proposes an estimation of microwave transmissivity within the Canadian boreal forest. The aim is to correct the forest effect in snow water equivalent estimation from Special Sensor Microwave Imager and Advanced Microwave Scanning Radiometer microwave measurements. The estimation was carried out using ground-based radiometric measurements, at 19 and 37 GHz, and for both polarizations. The results show that the transmissivity is correlated with the stem volume and is independent of the tree species. For high stem volumes (>100 m/sup 3//ha), the transmissivity is found to be 0.4 and 0.3 for 19 and 37 GHz, respectively.     

An algorithm for determination of aerosol opticalthickness from AVHRR imagery over oceans

Summary The uncertainty in aerosol size distributions is a main source of errors in aerosol optical thickness determined from satellite measurements. To reduce the errors resulting from the uncertainty in aerosol size distributions, we have performed sensitivity analyses. It is found the errors resulting from the uncertainty in aerosol size distribution can be considerably reduced by using the Junge power law to approximate the aerosol size distribution in an actual atmosphere, if the exponent value is determined at the same time. An iterative algorithm is then developed for the simultaneous determination of aerosol optical thickness and the exponent of the Junge power law over ocean areas from the upwelling radiances measured in AVHRR visible and near infrared channels. A number of numerical experiments are carried out to investigate the validity of the Junge power law approximation by assuming the aerosol size distributions in an actual atmosphere are bimodal with different mode parameters, and by using the actual aerosol size distributions determined at several places by Kaufman et al. (1994). The results show that the errors in determined aerosol optical thickness resulting from the Junge power law approach are significantly reduced. The iterative algorithm is investigated further by comparing the aerosol optical thickness deduced from satellite measurement with that observed by a sun photometer. Received October 10, 2001 Revised December 28, 2001     

Insolation estimates for the LITFASS area derived from high resolution satellite data

Summary ?For the LITFASS-98 experiment, from June 1 until June 30, 1998, the spatially resolved insolation at surface could be computed from NOAA-14 AVHRR data applying the modular analysis scheme SESAT (Strahlungs- und Energiebilanzen aus Satellitendaten). The satellite inferred insolation for this period shows for clear-sky regions a good agreement with surface based observations with a rms error of 76 Wm⁻². For cloudy conditions the insolation is overestimated with respect to ground based observations, with a rms error between 83 and 118 Wm⁻², depending on the cloud optical thickness. This overestimation can be explained by the surface heterogeneity, leading to underestimated cloud optical thickness, and also by a fixed relative humidity below clouds (55%, dry atmosphere) and a fixed horizontal visibility (50 km, clear atmosphere). A detailed study of comparable scales in space and time, considering the different observation geometries and sampling intervals, shows that a 30 min ground based observation can be compared with a 8 × 8 km² mean by the satellite data. Received July 12, 2001; revised April 29, 2002; accepted June 7, 2002     

Aerosol characterization and optical thickness retrievalsusing GOME and METEOSAT satellite data

Summary ?Retrievals of atmospheric aerosol optical thickness are highly dependent on the choice of the class describing the aerosol properties leading to significant errors while using classes available in the literature. High spectral resolution measurements from GOME (Global Ozone Monitoring Experiment) between the ultraviolet and the near infrared can be used for an accurate characterization of the aerosol optical properties. The radiometer MVIRI (METEOSAT Visible and Infrared Imager) on board the geostationary satellite METEOSAT, while being equipped only with broadband VIS channel, ensures an adequate half-hourly monitoring of the atmospheric conditions over a large portion of the Earth. The present algorithm is based on a combination of data from both sensors for the retrieval of the aerosol optical thickness at the reference wavelength of 0.55 μm (AOT). A case of a desert dust outbreak from the African continent over the Atlantic Ocean is examined. AOT values obtained using a priori fixed classes taken from the literature are compared with those retrieved with this algorithm using the GOME-derived classes. Systematic differences of the order of a few tenths on average are found which remain significant also after considering the measurement errors. This represents a novelty introduced by the synergetic use of both sensors. Received March 13, 2002     

Particle size dependent response of aerosol counters

During an international workshop at the Institute for Experimental Physics of the University of Vienna, Austria, which was coordinated within the Committee on Nucleation and Atmospheric Aerosols (IAMAS-IUGG), 10 instruments for aerosol number concentration measurement were studied, covering a wide range of methods based on various different measuring principles. In order to investigate the detection limits of the instruments considered with respect to particle size, simultaneous number concentration measurements were performed for monodispersed aerosols with particle sizes ranging from 1.5 to 50 nm diameter and various compositions.The instruments considered show quite different response characteristics, apparently related to the different vapors used in the various counters to enlarge the particles to an optically detectable size. A strong dependence of the 50% cutoff diameter on the particle composition in correlation with the type of vapor used in the specific instrument was found. An enhanced detection efficiency for ultrafine hygroscopic sodium chloride aerosols was observed with water operated systems, an analogous trend was found for n-butanol operated systems with nonhygroscopic silver and tungsten oxide particles.     

Pseudodynamic tests on rubber base isolators with numerical substructuring of the superstructure and strain‐rate effect compensation

A pseudodynamic testing procedure has been applied by which the seismic response of a base‐isolated building is obtained by using as specimen the isolators, while the superstructure is numerically simulated. The procedure also takes advantage of the continuous pseudodynamic testing capabilities of the ELSA laboratory, which increase the accuracy of the results and reduce the strain‐rate effect of the rubber bearings. A simple proportional correction of the measured forces compensates the remaining strain‐rate effect due to the unrealistic speed of the test. The correction factor is obtained by means of a characterizing test on the specific rubber isolators. The developed method has been successfully applied to the prediction of the seismic response of a base‐isolated four‐storey building submitted to several specified accelerograms. The results for those earthquakes as well as the effects of some changes of the parameters of the system are discussed. Copyright © 2002 John Wiley & Sons, Ltd.