Soil contamination by metals with high ecological risk in urban and rural areas

Industrial development, intensive agriculture and fast urbanization have caused the metal contents of soils to increase to many times the allowable limits. To assess this impact on urban and rural soils, we quantified the Cd, Cr, Cu, Pb, Ni and Zn contents of 258 soil samples from the Recife metropolitan region (RMR). The objectives of the study were to estimate the probability of ecological risk, to determine the spatial pattern of the metals’ accumulation in the soil and to identify potential sources for the metals using a multivariate geostatistical approach. Mean concentrations of Zn, Cr, Pb, Cu, Ni and Cd in soils were 65.2, 17.9, 16.5, 12.8, 6.3 and 1.5 mg kg^?1, respectively. The results demonstrated that the Cd was anthropogenic in origin, the Cr and Ni were lithogenic (natural) in origin and the Cu, Pb and Zn were mixed in origin. Cd contaminated 91% of the samples; the median content of Cd (1.4 mg kg^?1) was three times the quality reference value for soil. The Cd contents of sugarcane fields exceeded the allowable limit (3.0 mg kg^?1) for agricultural areas. The spatial variability of the metals in the RMR showed that metallurgy, cement production, vehicle exhaust and vehicular traffic were the main sources of metals in urban areas, while phosphate-based fertilizers were the main sources in rural areas. More than 80% of the metropolitan region surveyed in the study was at moderate to high ecological risk.     

Groundwater behaviour in Madeira, volcanic island (Portugal)

Madeira Island is a hot-spot originating from a mantle plume. K-Ar age determinations indicate that the emerged part of the island was generated during Post-Miocene times 6000–7000 years B.P. Groundwater occurs in perched-water bodies, spring discharge from them is high, about 3,650 l/s; in dike-impounded water and basal groundwater. Basal groundwater is exploited by tunnels (1,100 l/s) and wells (1,100 l/s). Hydraulic gradients range from 10^–4 to 10^–2 and transmissivity ranges from 1.16×10^–2 to 2.89×10^–1 m²/s, indicating the heterogeneity of the volcanic aquifers. Water mineralisation is variable, and electrical conductivity ranges from 50 to 3,300 S/cm. There is a difference between groundwater discharging from perched-water bodies (43–201 S/cm) and from basal groundwater (109–3,300 S/cm). Groundwater average pH is 7.37, with waters acid to slightly alkaline (6.13–8.4), and generally cold. Nevertheless, a few samples associated with fault zones can be classified as thermal waters.

---

Resumen La Isla de Madeira tuvo origen en un punto caliente proveniente de una pluma del manto. Las dataciones K – Ar, indican que la parte emergida de la isla se formó durante en Post—Mioceno, hace unos 6000–7000 años. El agua subterránea se encuentra en acuíferos colgados, cuya descarga a través de manantiales es alta, alrededor de 3650 l/s; también como agua retenida en diques o bien como agua subterránea propiamente dicha. Esta última es explotada por túneles (1100 l/s) y pozos (1100 l/s). Los gradientes hidráulicos varían desde 10–4 hasta 10–2 y la transmisividad varía desde 1.16×10^–2 hasta 2.89×10^–1 m²/s, indicando la heterogeneidad de los acuíferos volcánicos. La mineralización de agua es variable y la conductividad eléctrica varía desde 50 mS/cm hasta 3300 mS/cm. Hay una diferencia entre el agua subterránea proveniente de acuíferos colgados (43–201 mS/cm) y aquella del acuífero principal (109–3300 mS/cm). El pH promedio para el agua subterránea es 7.37; con variación desde ácida hasta ligeramente alcalina (6.13–8.4), y es generalmente fría. Sin embargo unos pocos ejemplos asociados con zonas de falla, pueden ser clasificados como agua termal.

---

Résumé Lîle de Madeira est un point chaud, provenant dun panache mantélique. Les datations par la méthode de K-Ar indiquent que la part émergée de lîle a été générée pendant le Post Miocène, il y a 6000–7000 ans. Les eaux souterraines sont cantonnées dans des aquifères perchées qui se déchargent par des sources à grands débits, avec des valeurs dapproximativement de 3500 l/s, ainsi que dans les dikes. Une importante quantité des eaux souterraine se trouve sur la forme deau de fonds, formant une nappe basale, qui est exploitée par des tunnels (1100 l/s) et par des puits (1100 l/s). Les gradients hydrauliques ont des valeurs dans lintervalle de 10^–2 à 10^–4, tandis que les transmissivités se rangent entre 1.16×10^–2 m²/s et 2.81×10^–1 m²/s, ce quindique la hétérogénéité de laquifère volcanique. La minéralisation des eaux est aussi variable avec des conductivités électriques qui se rangent ente 50 mS/cm et 3300 mS/cm. Il y a une différence entre la conductivité des eaux provenant des aquifères perchées (30–201 mS/cm) par rapport à la conductivité les eaux de la nappe basale (109–3300 mS/cm). Le pH moyen est de 7.37 avec des valeurs de 6.13 pour les eaux acides et de 8.4 pour les eaux à faible alcalinité. En général il sagit des eaux froides, mais quelques échantillons provenant des zones faillées peuvent être classifiés comme des eaux thermales.

     

Morphology and modern sedimentary deposits of the macrotidal Marapanim Estuary (Amazon,Brazil)

The northern Brazilian coast, east of the Amazon River is characterized by several macrotidal estuarine systems that harbor large mangrove areas with approximately 7600 km². The Marapanim Estuary is influenced by macrotidal regime with moderate waves influence. Morphologic units were investigated by using remote sensing images (i.e., Landsat-7 ETM+, RADARSAT- 1 Wide and SRTM) integrated with bathymetric data. The modern sedimentary deposits were analyzed from 67 cores collected by Vibracore and Rammkersonde systems. Analysis of morphology and surface sedimentary deposits of the Marapanim River reveal they are strongly influenced by the interaction of tidal, wave and fluvial currents. Based on these processes it was possible to recognize three distinct longitudinal facies zonation that revels the geological filling of a macrotidal estuary. The estuary mouth contain fine to medium marine sands strongly influenced by waves and tides, responsible for macrotidal sandy beaches and estuarine channel development, which are characterized by wave-ripple bedding and longitudinal cross-bedding sands. The estuary funnel is mainly influenced by tides that form wide tidal mudflats, colonized by mangroves, along the estuarine margin, with parallel laminations, lenticular bedding, root fragments and organic matter lenses. The upstream estuary contains coarse sand to gravel of fluvial origin. Massive mud with organic matter lenses, marks and roots fragments occur in the floodplain accumulates during seasonal flooding providing a slowly aggrading in the alluvial plain. This morphologic and depositional pattern show easily a tripartite zonation of a macrotidal estuary, that are in the final stage of filling.     

The convective boundary layer over pasture and forest in Amazonia

Summary The coupling between different types of surface (tropical forest or grass) and the Convective Boundary Layer (CBL) has been investigated using observational (rawinsoundings) data collected over Rondônia in southwest Amazonia. The data reported here support the notion that deforestation may modify the dynamics of the boundary layer, in particular during the dry season. In this period the sensible heat fluxes are very high over pasture, creating a CBL around 550m deeper compared to that over the forest. The measurements showed the height of the fully developed CBL for pasture to be 1650m, compared to around 1100m for forest. During the wet season the height of the CBL is lower than during the dry season and has the same height (around 1000m) for forest and pasture sites. The CBL over pasture is hotter and drier than over forest during the dry season, but during the wet season the air temperatures and humidities are similar. Comparing the CBL growth during the dry and wet season, there is evidence that the CBL properties over the forest are not dependent on the surface characteristics, but over the pasture they are.     

Implications of Japan’s long term climate mitigation target and the relevance of uncertain nuclear policy

Achieving long-term climate mitigation goals in Japan faces several challenges, starting with the uncertain nuclear power policy after the 2011 earthquake, the uncertain availability and progress of energy technologies, as well as energy security concerns in light of a high dependency on fuel imports. The combined weight of these challenges needs to be clarified in terms of the energy system and macroeconomic impacts. We applied a general equilibrium energy economic model to assess these impacts on an 80% emission reduction target by 2050 considering several alternative scenarios for nuclear power deployment, technology availability, end use energy efficiency, and the price of fossil fuels. We found that achieving the mitigation target was feasible for all scenarios, with considerable reductions in total energy consumption (39%–50%), higher shares of low-carbon sources (43%–72% compared to 15%), and larger shares of electricity in the final energy supply (51%–58% compared to 42%). The economic impacts of limiting nuclear power by 2050 (3.5% GDP loss) were small compared to the lack of carbon capture and storage (CCS) (6.4% GDP loss). Mitigation scenarios led to an improvement in energy security indicators (trade dependency and diversity of primary energy sources) even in the absence of nuclear power. Moreover, preliminary analysis indicates that expanding the range of renewable energy resources can lower the macroeconomic impacts of the long term target considerably, and thus further in depth analysis is needed on this aspect.

Key policy insights

• For Japan, an emissions reduction target of 80% by 2050 is feasible without nuclear power or CCS.

• The macroeconomic impact of such a 2050 target was largest without CCS, and smallest without nuclear power.

• Energy security indicators improved in mitigation scenarios compared to the baseline.

     

Revisiting wintertime cold air intrusions at the east of the Andes: propagating features from subtropical Argentina to Peruvian Amazon and relationship with large-scale circulation patterns

This study investigates the spatial and temporal characteristics of cold surges that propagates northward along the eastern flank of the Andes from subtropical to tropical South America analysing wintertime in situ daily minimum temperature observations from Argentina, Bolivia and Peru and ERA-40 reanalysis over the 1975–2001 period. Cold surges usually last 2 or 3 days but are generally less persistent in the southern La Plata basin compared to tropical regions. On average, three to four cold surges are reported each year. Our analysis reveals that 52 % of cold episodes registered in the south of La Plata basin propagate northward to the northern Peruvian Amazon at a speed of around 20 m s^?1. In comparison to cold surges that do not reach the tropical region, we demonstrate that these cold surges are characterized, before they reach the tropical region, by a higher occurrence of a specific circulation pattern associated to southern low-level winds progression toward low latitudes combined with subsidence and dry condition in the middle and low troposphere that reinforce the cold episode through a radiative effect. Finally, the relationship between cold surges and atmosphere dynamics is illustrated for the two most severe cold intrusions that reached the Peruvian and Bolivian Amazon in the last 20 years.     

Benthic foraminifera distribution in a tourist lagoon in Rio de Janeiro, Brazil: a response to anthropogenic impacts

Rodrigo de Freitas Lagoon, located in the Rio de Janeiro City, receives several types of polluted discharges. The knowledge of the sediment microfauna correlated with heavy metal and organic matter concentrations could supply important data about the conditions of the lagoon. The benthic foraminiferal assemblage presented larger diversity and more abundant samples in the lagoon entrance than in the inner area. The Ammonia tepida - Elphidiumexcavatum foraminiferal assemblage is characterized by dwarf, corroded and weak organisms. Agglutinated species were found only near the entrance. Low abundance values and sterility of five samples in the inner area (north/northeast) can be caused by high levels of heavy metals and organic matter. A. tepida shows negative correlation with increasing heavy metals values. PAHs and coprostanol high indexes, and the absence or low presence of microfauna in samples around the lagoon margin confirm illegal flows from gas stations and domestic sewage.     

Total mercury in terrestrial systems (air-soil-plant-water) at the mining region of San Joaquín,Queretaro, Mexico

Deficient management of cinnabar mining left the San Joaquín region with high concentrations of mercury in its soils (2.4 – 4164 mg kg^-1). Numerous cinnabar mines have contributed to the dispersion of mercury into agricultural (0.5 –314 mg kg^-1) and forest (0.2 – 69 mg kg^-1) soils. Sediments are a natural means of transportation for mercury, causing its spreading, especially in areas near mine entrances (0.6 – 687 mg kg^-1). The nearness of maize crops to mines favors mercury accumulation in the different plant structures, such as roots, stems, leaves, and grain (0.04 – 8.2 mg kg^-1); these being related to mercury volatilization and accumulation in soils. Mercury vapor present in the settlements could indicate a constant volatilization from lands and soils (22 – 153 ng m^-3). The mercury levels found in the soils, in maize grain, and in the air resulted greater than the standards reported by the Official Mexican Norm (NOM) and the World Health Organization (WHO). Mercury in rainwater is due mainly to the presence of suspended atmospheric particles, later deposited on the surface (1.5 – 339 μg |^-1). Mercury dissolution was found in the drinking water (10 – 170 ng |^-1), with concentrations below those established by the NOM and the WHO. The contamination existing in the San Joaquín region does not reach the levels of the world’s greatest mercury producers: Almaden (Spain) and Idrija (Slovenia). It is, however, like that found in other important second degree world producers such as Guizhou (China). The population of San Joaquín, as well as its surrounding environment, are constantly exposed to mercury contamination, thus making a long term monitoring necessary to determine its effects, especially to people.