Microstructural evolution of the Seridó Belt, NE-Brazil: the effect of two tectonic events on development of c-axis preferred orientation in quartz

The polyphase evolution of the Seridó Belt (NE-Brazil) includes D₁ crust formation at 2.3–2.1 Ga, D₂ thrust tectonics at 1.9 Ga and crustal reworking by D₃ strike-slip shear zones at 600 Ma. Microstructural investigations within mylonites associated with D₂ and D₃ events were used to constrain the tectono-thermal evolution of the belt. D₂ shear zones commenced at deeper crustal levels and high amphibolite facies conditions (600–650 °C) through grain boundary migration, subgrain rotation and operation of quartz c-prism slip. Continued shearing and exhumation of the terrain forced the re-equilibration of high-T fabrics and the switching of slip systems from c-prism to positive and negative a-rhombs. During D₃, enhancement of ductility by dissipation of heat that came from syn-D₃ granites developed wide belts of amphibolite facies mylonites. Continued shearing, uplift and cooling of the region induced D₃ shear zones to act in ductile-brittle regimes, marked by fracturing and development of thinner belts of greenschist facies mylonites. During this event, switching from a-prism to a-basal slip indicates a thermal path from 600 to 350 °C. Therefore, microstructures and quartz c-axis fabrics in polydeformed rocks from the Seridó Belt preserve the record of two major events, which includes contrasting deformation mechanisms and thermal paths.     

Assessment of WRF numerical model forecasts using different lead time initializations during extreme precipitation events over Macaé city,Rio de Janeiro (Brazil)

Natural Hazards - The ability to forecast extreme precipitation events has become increasingly important over the last decades due to their significant impacts on society and properties. In this...     

Chloride contamination in construction aggregates due to periodic saline water intrusion: a case study in the Kaluganga River Estuary, Sri Lanka

The Kaluganga River Estuary is one of the main sources of construction sand in Sri Lanka. Salt water intrusion along this estuary due to extensive sand mining has increased over the years. Thus, the focus of the current research is to understand the relationship between river sand mining, salt water intrusion, and the resultant effects on construction sand. Two surveys were conducted along the Kaluganga Estuary along an 11 km stretch from the river mouth at predetermined intervals to measure depth water quality profiles, and to collect sediment samples. These surveys were carried out during maximum spring tide; first in a dry period and then in a wet period, to understand hydrographic effects on the quality of river sands. Sand samples were analysed for absolute chloride content and grain size distribution. Results showed significant salt water intrusion during the dry period, averaging 2,307 μS cm^?1 in surface waters throughout the surveyed 11 km stretch along with 3,818 μS cm^?1 (average) in bottom waters up to 5.6 km upstream from the river mouth causing above normal chloride content in the bottom sandy sediments. The high chloride content in bottom sands was recorded up to 5.5 km from the river mouth making them unsuitable for construction purposes. However, during wet period, salt water intrusion levels in the bottom waters were insignificant (average 61 μS cm^?1) and the chloride content in bottom sediments was very low. This study highlighted the requirement for regulations on river estuary sandmining for construction purposes.     

Lake sedimentary processes and vegetation changes over the last 45k cal a bp in the uplands of south-eastern Amazonia

This study addresses paleoclimate influences in a southern Amazonia ecotone based on multiproxy records from lakes of the Carajás region during the last 45k cal a bp. Wet and cool environmental conditions marked the initial deposition in shallow depressions with detrital sediments and high weathering rates until 40k cal a bp. Concomitantly, forest and C3 canga plants, along with cool-adapted taxa, developed; however, short drier episodes enabled expansion of C4 plants and diagenetic formation of siderite. A massive event of siderite formation occurred approximately 30k cal a bp under strong drier conditions. Afterwards, wet and cool environmental conditions returned and persisted until the Last Glacial Maximum (LGM). The LGM was marked by lake-level lowstands and subaerial exposure. The transition from the LGM to the Holocene is marked by the onset of oscillations in temperature and humidity, with an expansion of forest and canga plants. Cool taxa were present for the last time in the Carajás region ~ 9.5–9k cal a bp. After 10k cal a bp , shallow lakes became upland swamps due to natural infilling processes, but the current vegetation types and structures of the plateaus were acquired only after 3k cal a bp under wetter climatic conditions.     

An Automatic Well Planner for Complex Well Trajectories

Mathematical Geosciences - A data-driven automatic well planner procedure is implemented to develop complex well trajectories by efficiently adapting to near-well reservoir properties and geometry....     

Assessment to the potential mobility and toxicity of metals and metalloids in soils contaminated by old Sb–Au and As–Au mines (NW Portugal)

The main purpose of this study is to assess arsenic and antimony availability in soils, as well as Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn availability in soils derived from the schist–metagraywacke complex close to old Sb–Au mines and in soils developed from Ordovician slates and close to an old As–Au mine in Portugal. The availability was determined using a European certified sequential extraction procedure (BCR). The results demonstrated that metalloids are not readily bioavailable, because they are mainly associated with the residual fraction. Arsenic and antimony proportions in exchangeable fractions are up to 3 and 1%, respectively. However, arsenic is up to 24% in oxy-hydroxide fractions, while antimony is up to 4% in them, demonstrating the highest bioavailability of arsenic compared to that of antimony, as metalloids are weakly bound to the soils in that fraction. Therefore, arsenic tends to be more toxic than antimony in all soils studied. However, the pseudo-total contents show that both metalloids are above the Italian and Dutch guidelines. Therefore, if physico-chemical changes occur arsenic and antimony will show higher potential environmental risk than evidenced by Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn.     

Paleoecology and radiocarbon dating of the Pleistocene megafauna of the Brazilian Intertropical Region

During the Pleistocene a fauna composed of large (biomass > 44 kg) and giant mammals (biomass > 1000 kg) that are usually associated with open environments lived in the Brazilian Intertropical Region. We present here new information concerning the paleoecology and chronology of some species of this megafauna. Carbon isotope analyses were performed for a better understanding of the paleoecology of the species Eremotherium laurillardi (Lund, 1842), Notiomastodon platensis (Ameghino, 1888) and Toxodon platensis (Owen, 1849). The δ¹³C data allow attributing a generalist diet to these species, which varied according to the kind of habitat in which they lived. In more open habitats all species were grazers; in mixed habitats E. laurillardi and T. platensis were mixed feeders, and N. platensis was grazer; and in more closed habitats all species were mixed feeders.     

Clustering and visualization of earthquake data in a grid environment

We present a web client-server service WEB-IS, which we have developed for remote analysis and visualization of seismic data consisting of both small magnitude events and large earthquakes. We show that the problem-solving environment (PSE) intended for prediction of large magnitude earthquakes can be based on this WEB-IS idea. The clustering schemes, feature generation, feature extraction techniques and rendering algorithms form a computational framework of this environment. On the other hand, easy and fast access both to the seismic data distributed among distant computing resources and to computational and visualization resources can be realized in a GRID framework. We discuss the usefulness of NaradaBrokering (iNtegrated Asynchronous Real-time Adaptive Distributed Architecture) as a middleware, allowing for flexibility and high throughput for remote visualization of geophysical data. The WEB-IS functionality was tested both on synthetic and the actual earthquake catalogs. We consider the application of similar methodology for tsunami alerts.     

Modélisation morphodynamique cross-shore d'un estran vaseux

Numerical experiments were performed to simulate the profile evolution of an intertidal mudflat with a 1D cross-shore morphodynamical model. First, the hydrodynamical forcing is a cross-shore tidal current due to semi-diurnal variations of the free surface elevation at the open boundary. Further, considering the conservation of the action density of surface gravity waves, a wave height (and resulting bottom shear stress) calculation is added to the morphodynamical model. Results of the numerical experiments show that the shape of the profile reaches equilibrium. The mudflat progrades continually when the forcing is tide only, whereas it can be steady under the simultaneous action of tide and waves. To cite this article: B. Waeles et al., C. R. Geoscience 336 (2004).     

Vermiculite bio-barriers for Cu and Zn remediation: an eco-friendly approach for freshwater and sediments protection

The increase in heavy metal contamination in freshwater systems causes serious environmental problems in most industrialized countries, and the effort to find eco-friendly techniques for reducing water and sediment contamination is fundamental for environmental protection. Permeable barriers made of natural clays can be used as low-cost and eco-friendly materials for adsorbing heavy metals from water solution and thus reducing the sediment contamination. This study discusses the application of permeable barriers made of vermiculite clay for heavy metals remediation at the interface between water and sediments and investigates the possibility to increase their efficiency by loading the vermiculite surface with a microbial biofilm of Pseudomonas putida, which is well known to be a heavy metal accumulator. Some batch assays were performed to verify the uptake capacity of two systems and their adsorption kinetics, and the results indicated that the vermiculite bio-barrier system had a higher removal capacity than the vermiculite barrier (+34.4 and 22.8 % for Cu and Zn, respectively). Moreover, the presence of P. putida biofilm strongly contributed to fasten the kinetics of metals adsorption onto vermiculite sheets. In open-system conditions, the presence of a vermiculite barrier at the interface between water and sediment could reduce the sediment contamination up to 20 and 23 % for Cu and Zn, respectively, highlighting the efficiency of these eco-friendly materials for environmental applications. Nevertheless, the contribution of microbial biofilm in open-system setup should be optimized, and some important considerations about biofilm attachment in a continuous-flow system have been discussed.