Origins and development of Holocene coral reefs: a revisited model based on reef boreholes in the Seychelles, Indian Ocean

 Until recently, concepts of coral reef growth and accumulation have been predominantly based on a Darwinian model. In this, the upwards and outwards growth of a reef core (a coral framework) takes place over a foreslope consisting of reef talus, with the simultaneous filling of the back-reef lagoon by reef-derived debris. The principal adaptations of this pattern relate to the influence of relative changes in sea level and commonly ignore oceanographic factors such as storm frequency and severity. Boreholes through the outer edge of a fringing reef in the Seychelles, western Indian Ocean, reveal a record of Holocene sediment accumulation first established approximately 8 ka ago. Faunal and floral associations show that growth of this body began in relatively deep water but that this shallowed to <5 m within 1 ka. Subsequent accumulation was of “keep-up” style but, as the rate of sea-level rise slowed, shoaling became more frequent and aggradation was limited by reducing accommodation space. Constructional facies are characterised either by massive corals, including Leptastrea, Porites and faviids, or by branching corals, typically Acropora of the danai-robusta group. Coral surfaces may be encrusted by red algae, foraminifera and vermetids, and are commonly bored by filamentous algae, clionids and molluscs. However, detrital facies are volumetrically dominant, and the paucity of a constructional framework requires a re-evaluation of models of reef accretion. New models relate the geometry of accretion to the interplay between extreme storm events and fairweather hydrodynamic conditions. These suggest that a contiguous framework forms in areas of moderate fairweather energy without extreme storm events. Severe storms destroy the continuity of reef structures and generate increasing volumes of coarse detritus. Low storm severity, coupled with low fairweather hydrodynamic energy, may promote the accumulation of fine-grained reef-derived sediments that inhibit framework growth. While ecology reflects year-by-year sea conditions, lithology and structure are controlled by exceptional storms, with the effects of changing sea level superimposed. Received: 30 November 1998 / Accepted: 4 November 1999     

Towards a microzonation of the Greater Beirut area: an instrumental approach combining earthquake and ambient vibration recordings

Lebanon is situated on the 1000 km long Levant transform fault that separates the Arabic from the African tectonic plates. In Lebanon, the Levant fault splits up into a set of ramifications that had, in the past, generated major destructive earthquakes causing a lot of destruction and thousands of casualties. The most devastating one was the 551 A.D. offshore earthquake that destroyed Beirut, the capital of Lebanon. This paper presents a site effect study in Beirut, aimed at proposing a framework for future microzonation works in the city. It includes two complementary parts. A 6-month, temporary seismological experiment was first conducted to estimate the site response at 10 sites sampling the main geological units of Beirut on the basis of local and regional earthquake recordings. This spatially sparse information was then complemented by a large number (615) of microtremor measurements covering the Beirut municipality and part of its suburbs with a 400 m dense grid. The recordings were analysed with the standard site-to-reference and horizontal-to-vertical spectral ratio methods for earthquake recordings, and the horizontal-to-vertical ratio for ambient noise recordings. Significant ground motion amplification effects (up to a factor of 8) are found in a few areas corresponding to recent deposits. The consistency between results from earthquake and microtremor recordings allows proposing a map of the resonance frequencies within the city and its suburbs, with frequencies ranging from 0.5 to 5 Hz for the deepest deposits, and 5–10 Hz for shallow areas. Finally, the results are discussed and a way to combine the results obtained from the temporary stations to the great number of recordings coming from the permanent Lebanese network is proposed.     

Evaluating the Potential of an Airborne Laser-scanning System for Measuring Volume Changes of Glaciers

Airborne laser scanning (ALS) is well suited for the production of digital elevation models (DEM), and can, in contrast to photographic methods, be used to acquire a DEM independently of surface texture and external light sources. ALS thus serves as a tool to generate DEMs of firn areas where photogram- metric methods often fail.
The potential of an integrated ALS system – comprising a laser scanner, precise differential global positioning system, and a gyro platform – for DEM generation of firn areas is currently being assessed. The Unteraargletscher, Bernese Alps, Switzerland, has been chosen as a test site. As part of a pilot project aimed at determining the mass balance distribution of that glacier without the use of in situ information, ALS measurements were conducted in autumn 1997. The DEM derived from laser measurements is extremely sensitive to the position and attitude of the aircraft. Currently the main work focuses on assessing and improving the system's accuracy by error modelling and by the development of error-correction algorithms.
Preliminary results from Unteraargletscher are presented, and the potential of this method for the generation of DEMs of firn areas is discussed.     

Theoretical study of the local charge compensation and spectroscopic properties of B-type carbonate defects in apatite

The structure and spectroscopic properties of selected models of B-type carbonate defects in apatite locally compensated by fluoride or hydroxyl ions are investigated using first-principles quantum mechanical calculations. Theoretical infrared absorption spectra and ¹³C, and ¹⁹F nuclear magnetic resonance chemical shifts are determined. Among the investigated models, only the clumped (CO₃ ^2?, F^?) defect, with the carbonate group close to the sloping face of the tetrahedral site and the F^? ion at the remaining apex, corresponds to previous experimental observations performed on carbonate-fluorapatite samples. Although the substitution of hydroxyl by fluoride ions is commonly observed in minerals, the clumped (CO₃ ^2?, OH^?) defects are unlikely to occur in apatite, considering both their theoretical spectroscopic properties and relative stability. Anionic F^? for OH^? exchange between channel and B sites displays a preference of ~20 kJ/mol for the local charge compensation by fluoride ions at the B-site, pointing to a significantly different behavior of F^? and OH^? ions in the charge compensation mechanism. This difference is ascribed to the poor H-bond acceptor character of available oxygen atoms surrounding the apex of the tetrahedral site. The explicit calculation of the infrared absorption spectra of the defect models is also used to interpret the significant difference observed in the linewidth of the ν₂ and ν₃ CO₃ infrared powder absorption bands of carbonated apatite samples. It is shown that for a concentration of 4.4 wt% of CO₂, long-range electrostatic effects already significantly contribute to the broadening of the ν₃ CO₃ bands in apatite.     

Sedimentary fabric characterized by X-ray tomography: A case-study from tsunami deposits on the Marquesas Islands,French Polynesia

X-ray tomography is used to analyse the grain size and sedimentary fabric of two tsunami deposits in the Marquesas Islands (French Polynesia, Pacific Ocean) which are particularly exposed to trans-Pacific tsunamis. One site is located on the southern coast of Nuku Hiva Island (Hooumi) and the other one is on the southern coast of Hiva Oa Island (Tahauku). Results are compared with other techniques such as two-dimensional image analysis on bulk samples (particle analyser) and anisotropy of magnetic susceptibility. The sedimentary fabric is characterized through three-dimensional stacks of horizontal slices (following a vertical step of 2·5 mm along the cores), while grain-size distribution is estimated from two-dimensional vertical slices (following a step of 2 mm). Four types of fabric are distinguished: (a) moderate to high angle (15 to 75°); (b) bimodal low-angle (<15°); (c) low to high angle with at least two different orientations; and (d) dispersed fabric. The fabric geometry in a tsunami deposit is not only controlled by the characteristics of the flow itself (current strength, flow regime, etc.) but also sediment concentration, deposition rate and grain-size distribution. There is a notable correlation between unimodal high-angle fabric – type (a) – and finely-skewed grain-size distribution. The two tsunami deposits studied represent two different scenarios of inundation. As demonstrated here, X-ray tomography is an essential method for characterizing past tsunamis from their deposits. The method can be applied to many other types of sediments and sedimentary rocks.     

Hydrological regimes in a tropical valley of New Caledonia (SW Pacific): Impacts of wildfires and invasive fauna

In New Caledonia wildfires and invasive mammals (deer and wild pigs) constitute the major agents of land surface degradation. Our study reveals the linkage between land cover and water balance on the northeast coast of New Caledonia (2400 mm annual rainfall) located on a micaschist basement. The hydrological regime of characteristic and representative land surfaces is assessed using a 1-year record from three 100 m² plots each, located in a forest area degraded by an invasive fauna, in a woody savannah which is regularly burned, and in a healthy forest area. The three plots present highly contrasting hydrological regimes, with annual and maximum runoff/rain ratios during a rain event of, respectively, 0.82, 0.16, 0.03, and 2.7, 0.7, 0.2, for the degraded forest, the savannah and the healthy forest. Such results suggest that subsurface flow originating from the contributing area above the degraded forest plot should exfiltrate inside the plot. A conceptual model for the degraded forest plot shows that water exfiltrating inside the plot represents 61% of the observed runoff. In savannahs, water should mainly be transferred downstream by subsurface flow within a thick organic soil layer limited by an impervious clay layer at a 20–30 cm depth. Savannahs are generally located above forests and generate the transfer of rainwater to downslope forests. Exfiltration into the forests can be the result of this transfer and depends on the thickness and permeability of the forest topsoils and on topographic gradients. Water exfiltration in forest areas highly degraded by pigs and deer enhances erosion and increases further degradation. It probably also limits percolation in the areas located downstream by increasing the amount of superficial runoff concentrated in gullies.     

Late Wisconsinan deglaciation and proglacial lakes development in the Charlevoix region,southeastern Québec,Canada

The Charlevoix region, in southeastern Québec, is characterized by a dramatic landscape formed by the junction of the Laurentian Highlands, the Charlevoix Astrobleme and the St Lawrence Estuary. At the Last Glacial Maximum (LGM), the region was completely covered by the Laurentide Ice Sheet (LIS). The complex topography of the region was the stage of many of the major deglacial events of southern Quebec (e.g. Goldthwait Sea Invasion, St Lawrence Ice‐Stream, Saint‐Narcisse Episode). We present a detailed reconstruction of the pattern of retreat of the LIS in the Charlevoix region based on the interpretation of ice‐marginal features (e.g. moraines, fans) and glaciolacustrine landforms and deposits, two extensive field campaigns, and the interpretation of high‐resolution 3D digital aerial photographs and LiDAR data. Our results indicate five moraine complexes in the region: the Rochette, the Brûlée, the Sainte‐Anne, the Saint‐Narcisse and the Mars‐Batiscan complexes. Deltas, fans, fine‐grained sediments, littoral deposits, drainage breaches and deposits were used to identify 91 palaeo‐proglacial lakes. The identification of these lakes and their relation to moraine complexes enabled the reconstruction of six stages of lake development during the Charlevoix deglaciation. The development of proglacial lakes occurred in all types of terrain (highlands, lowlands, transitory levels above marine limit). We conclude that local topography had a decisive effect on promoting both moraine deposition and lake development. We suggest that similar topographical regions (hilly‐mountainous) that were affected by major ice‐margin stabilizations during glacial retreat should have experience small lakes dominating valleys and topographical lows.     

Sul terremoto delle Isole Eolie del 27 gennaio 1939

Riassunto Richiamate, dopo qualche cenno storico sui principali terremoti eolici, le concezioni e le ipotesi di alcuni sismologi e geologi sull'instabilità geosismica dell'arcipelago e sulle sue cause, si espongono i dati micro e macrosismici del terremoto in oggetto. Dopo l'analisi dei medesimi, seguono alcuni cenni sulla natura quasi certamente tettonica del sisma e se ne prospettano le probabili cause. Chiudono la Nota alcune considerazioni sugli effetti meccanici della scossa in rapporto con l'edilizia delle Isole Eolie e sulle norme adatte nelle particolari condizioni locali a meglio garantire la stabilità dei fabbricati.     

Active oceanic spreading in the northern North Fiji Basin: Results of the NOFI cruise of R/V L'Atalante (newstarmer project)

The South Pandora and the Tripartite Ridges are active spreading centers located in the northern part of the North Fiji Basin. These spreading centers were surveyed over a distance of 750 km during the NOFI cruise of R/V L'Atalante (August–September 1994) which was conducted in the frame of the french-japanese Newstarmer cooperation project. SIMRAD EM12-dual full coverage swath bathymetric and imagery data as well as airgun 6-channel seismic, magnetics and gravity profiles were recorded along and offaxis from 170°40 E to 178° E. Dredging and piston coring were also performed along and off-axis. The axial domain of the South Pandora Ridge is divided into 5 first-order segments characterized by contrasted morphologies. The average width of the active domain is 20 km and corresponds either to bathymetric highs or to deep elongated grabens. The bathymetric highs are volcanic constructions, locally faulted and rifted, which can obstruct totally the axial valley. The grabens show the typical morphology of slow spreading axes, with two steep walls flanking a deep axial valley. Elongated lateral ridges may be present on both sides of the grabens. Numerous volcanoes, up to several kilometers in diameter, occur on both flanks of the South Pandora Ridge. The Tripartite Ridge consists of three main segments showing a sigmoid shape. Major changes in the direction of the active zones are observed at the segment discontinuities. These discontinuities show various geometrical patterns which suggest complex transform relay zones. Preliminary analysis of seismic reflection profiles suggest that the Tripartite Ridge is a very young feature which propagates into an older oceanic domain characterized by a significant sedimentary cover. By contrast, a very thin to absent sedimentary cover is observed about 100 km on both flanks of the South Pandora Ridge active axis. The magnetic anomaly profiles give evidence of long and continuous lineations, parallel to the South Pandora Ridge spreading axis. According to our preliminary interpretation, the spreading rate would have been very low (8 km/m.y. half rate) during the last 7 Ma. The South Pandora and Tripartite Ridges exhibit characteristics typical of active oceanic ridges: (1) a segmented pattern, with segments ranging from 80 to 100 km in length; (2) an axial tectonic and volcanic zone, 10 to 20 km wide; (3) well-organized magnetic lineations, parallel to the active axis; (4) clear signature on the free-air gravity anomaly map. However, no typical transform fault is observed; instead, complex relay zones are separating first-order segments.     

Experimental melting of phlogopite-peridotite in the garnet stability field

Melting experiments have been performed at 3 GPa, between 1150 and 1450 °C, on a phlogopite-peridotite source in the garnet stability field. We succeeded to extract and determine the melt compositions of both phlogopite-bearing lherzolite and harzburgite from low to high degrees of melting (? = 0.008–0.256). Accounting for the presence of small amounts of F in the mantle, we determined that phlogopite coexists with melt >150 °C above the solidus position (1150–1200 °C). Fluorine content of phlogopite continuously increases during partial melting from 0.2 to 0.9 wt% between 1000 and 1150 °C and 0.5 to 0.6 wt% between 1150 and 1300 °C at 1 and 3 GPa, respectively. The phlogopite continuous breakdown in the lherzolite follows the reaction: 0.59 phlogopite + 0.52 clinopyroxene + 0.18 garnet = 0.06 olivine + 0.23 orthopyroxene + 1.00 melt. In the phlogopite-harzburgite, the reaction is: 0.93 phlogopite + 0.46 garnet = 0.25 olivine + 0.14 orthopyroxene + 1.00 melt. Melts from phlogopite-peridotite sources at 3 GPa are silica-undersaturated and are foiditic to trachybasaltic in composition from very low (0.8 wt%) to high (25.6 wt%) degrees of melting. As observed at 1 GPa, the potassium content of primary mantle melts is buffered by the presence of phlogopite, but the buffering values are higher, from 6.0 to 8.0 wt% depending on the source fertility. We finally show that phlogopite garnet-peridotite melts are very close to the composition of the most primitive post-collisional lavas described worldwide.