Study of the spatial and historical distribution of sediment inorganic contamination in the Toulon bay (France)

This study presents trace elements levels in surface and deep sediments of the Toulon bay (SE France) subjected to anthropogenic inputs (navy base, harbors, etc.). The studied elements (As, Cd, Cr, Cu, Hg, Ni, Pb, Zn) are defined as priority contaminants in aquatic systems. Fifty-five points scattered on the entire bay were sampled, allowing the determination of contaminants distribution with a high resolution. Several approaches were used to assess the degree of contamination and the potential toxicity of the Toulon bay sediments: comparison to the French legislation, surface-weighted average metal concentrations, enrichment factors (EF), geoaccumulation indices (Igeo), trace element stock calculation and comparison to sediment quality guidelines. A principal component analysis was performed to reveal common behavior of the studied contaminants. Results demonstrated the very high contamination of the small bay, especially in Hg (EF up to 1500), Cu, Pb and Zn, with export to the large bay further governed by hydrodynamics.     

Variations in trace element geochemistry in the Seine River Basin based on floodplain deposits and bed sediments

Between 1990 and 1995 a series of bed sediment, suspended sediment and fresh floodplain samples were collected within the Seine River Basin, in France, to evaluate variations in trace element geochemistry. Average background trace element levels for the basin were determined from the collection and subsequent analyses of bed sediment samples from small rural watersheds and from a prehistoric (5000 BP) site in Paris. Concentrations are relatively low, and similar to those observed for fine‐grained bed sediments from unaffected areas in the United States and Canada. However, the concentrations are somewhat higher than the reference levels presently adopted by French water authorities for areas north of the Seine Basin, which have similar bedrock lithologies. Downstream trace element variations were monitored in 1994 and 1995 using fresh surficial floodplain samples that were collected either as dried deposits a few days after peak discharge, or immediately after peak discharge (under ≤30 cm of water). Chemical comparisons between fresh floodplain deposits, and actual suspended sediments collected during flood events, indicate that, with some caveats, the former can be used as surrogates for the latter. The floodplain sediment chemical data indicate that within the Seine Basin, from the relatively unaffected headwaters through heavily affected urban streams, trace element concentrations vary by as much as three orders of magnitude. These trace element changes appear to be the result of both increases in population as well as concomitant increases in industrial activity. (This article is a US government work and is in the public domain in the United States.)     

Recovery of Bennu’s orientation for the OSIRIS-REx mission: implications for the spin state accuracy and geolocation errors

The goal of the OSIRIS-REx mission is to return a sample of asteroid material from near-Earth asteroid (101955) Bennu. The role of the navigation and flight dynamics team is critical for the spacecraft to execute a precisely planned sampling maneuver over a specifically selected landing site. In particular, the orientation of Bennu needs to be recovered with good accuracy during orbital operations to contribute as small an error as possible to the landing error budget. Although Bennu is well characterized from Earth-based radar observations, its orientation dynamics are not sufficiently known to exclude the presence of a small wobble. To better understand this contingency and evaluate how well the orientation can be recovered in the presence of a large 1\(^{\circ }\) wobble, we conduct a comprehensive simulation with the NASA GSFC GEODYN orbit determination and geodetic parameter estimation software. We describe the dynamic orientation modeling implemented in GEODYN in support of OSIRIS-REx operations and show how both altimetry and imagery data can be used as either undifferenced (landmark, direct altimetry) or differenced (image crossover, altimetry crossover) measurements. We find that these two different types of data contribute differently to the recovery of instrument pointing or planetary orientation. When upweighted, the absolute measurements help reduce the geolocation errors, despite poorer astrometric (inertial) performance. We find that with no wobble present, all the geolocation requirements are met. While the presence of a large wobble is detrimental, the recovery is still reliable thanks to the combined use of altimetry and imagery data.     

Non-Newtonian effects during injection in partially crystallised magmas

Injection of Newtonian crystal-free magmas into a partially crystallised host which may exhibit non-Newtonian properties produces magmatic structures such as pipes, syn-plutonic dikes or dendritic structures. Field relationships between the structure and the host rock commonly indicate what the rheological contrasts during the injection were. The manner in which a magma deforms in response to injection is mainly linked to crystal content and strain rate (i.e., injection rate). Three kinds of behaviour can be distinguished: (1) Newtonian at low crystal contents; (2) Non-Newtonian at intermediate (40–60%) crystal contents, or at high crystal contents if the strain rate is small; and (3) brittle failure at high crystal content or strain rates.Petrologic observations indicate that injection can take place when the host magma still behaves as a fluid. To investigate the physics of the injection process we review the results of injection experiments in non-Newtonian fluids. These experiments were performed to study viscous fingering in 2-D Hele Shaw cells. They provide the first step to establishing the main non-Newtonian effects during the formation of interfacial instabilities arising when a Newtonian fluid is injected into a more viscous fluid or paste. The qualitative comparison of the morphological features of the interfaces between the fluids in the experiments with those in nature suggests that, in magmas, irregularities of the interfaces (dikes and dendrites) result from non-Newtonian properties of the host. We conclude that fluid-like deformation, rather than brittle behaviour of the host, during injection is likely to produce the general features observed on the field. Cooling effects might be responsible for the widespread phenomenon of fragmentation. We emphasise that the main effect of non-Newtonian properties in partially crystallised magmas is to generate strongly heterogeneous media producing discontinuities which could explain the main morphological features of syn-plutonic injection structures.     

Orbit determination of the Lunar Reconnaissance Orbiter

We present the results on precision orbit determination from the radio science investigation of the Lunar Reconnaissance Orbiter (LRO) spacecraft. We describe the data, modeling and methods used to achieve position knowledge several times better than the required 50–100 m (in total position), over the period from 13 July 2009 to 31 January 2011. In addition to the near-continuous radiometric tracking data, we include altimetric data from the Lunar Orbiter Laser Altimeter (LOLA) in the form of crossover measurements, and show that they strongly improve the accuracy of the orbit reconstruction (total position overlap differences decrease from ~70 m to ~23 m). To refine the spacecraft trajectory further, we develop a lunar gravity field by combining the newly acquired LRO data with the historical data. The reprocessing of the spacecraft trajectory with that model shows significantly increased accuracy (~20 m with only the radiometric data, and ~14 m with the addition of the altimetric crossovers). LOLA topographic maps and calibration data from the Lunar Reconnaissance Orbiter Camera were used to supplement the results of the overlap analysis and demonstrate the trajectory accuracy.     

Slow crack growth in minerals and rocks: Theory and experiments

Strength and mechanical behavior of rocks and minerals are modified by aqueous environments. This results in two effects: mechanical and chemical. The chemical effect is investigated from both a theoretical and an experimental point of view. It is shown that a thermodynamic approach leads to a satisfactory understanding of the chemical effect through an extended griffith concept. Predictions of the model have been tested using slow crack growth experiments. The experiments have been performed with a special Double Torsion apparatus which was built for this purpose. The good agreement observed between theory and experiments suggests that subcritical crack growth in rocks is controlled by adsorption onto the crack tip. This result was previously suggested by other authors (Dunning et al., 1984). However, the important consequences of the model are that (1) there should exist a threshold stress below which subcritical crack growth stops, and this threshold depends on the environment; (2) subcritical crack growth and time-dependent phenomena could take place in the crust in a stress interval which could be as high as 50% of the rupture stress.     

Geophysical characterization of the lithological control on the kinematic pattern in a large clayey landslide (Avignonet,French Alps)

Lithology variation is known to have a major control on landslide kinematics, but this effect may remain unnoticed due to low spatial coverage during investigation. The large clayey Avignonet landslide (French Alps) has been widely studied for more than 35 years. Displacement measurements at 38 geodetic stations over the landslide showed that the slide surface velocity dramatically increases below an elevation of about 700 m and that the more active zones are located at the bottom and the south of the landslide. Most of the geotechnical investigation was carried out in the southern part of the landslide where housing development occurred on lacustrine clay layers. In this study, new electrical prospecting all across the unstable area revealed the unexpected presence of a thick resistive layer covering the more elevated area and overlying the laminated clays, which is interpreted as the lower part of moraine deposits. The downslope lithological boundary of this layer was found at around 700 m asl. This boundary coincides with the observed changes in slide velocity and in surface roughness values computed from a LiDAR DTM acquired in 2006. This thick permeable upper layer constitutes a water reservoir, which is likely to influence the hydromechanical mechanism of the landslide. The study suggests a major control of vertical lithological variations on the landslide kinematics, which is highlighted by the relation between slide velocity and electrical resistivity.     

Geodetic control on recent tectonic movements in the central Mediterranean area

During the Neogene and Quaternary, the western Mediterranean geodynamics was apparently dominated by the nearly eastward migration of the Apenninic arc and the associated opening (spreading) of the back-arc basin (Tyrrhenian Sea). However, during the last 5 My, the collision of the arc with the Apulian platform led to a dramatic change in the tectonic setting of the area. As geological processes require a long period of time to register the displacements of the different blocks, it is indispensable to take into account the present-day motion given by space geodesy data analysis in order to better constrain the geological models.Geodetic motions were derived from Global Positioning System (GPS), Satellite Laser Ranging (SLR) and Very Long Baseline Interferometry (VLBI) observations collected from different networks. All the geodetic solutions have been computed and combined at the Centre of Space Geodesy (CGS), at Matera, Italy.The geodetic results show a NNE motion of the Adriatic plate with a small component of counter-clockwise rotation, in good agreement with the geological and geophysical observations.In the southern Tyrrhenian area, the lengthening of the Matera–Cagliari baseline should imply that convergence cannot be considered as the driving mechanism for the Apenninic subduction process. The estimated motion of Noto is in quite good agreement with the estimated motion of the African plate.