Investigation of dynamic behavior of geosynthetic reinforced soil retaining structures under earthquake loads

The results of an experimental study conducted on two 1:2 reduced-scale geotextile-reinforced soil retaining walls are presented and discussed. El Centro earthquake and sinusoidal harmonic motion excitations were applied to the 1.9 m tall models. The design parameter investigated was the reinforcement length (L/H = 0.9 in the 1st model and L/H = 0.6 in the 2nd model). The results were analyzed to evaluate the acceleration amplification, strains in the reinforcement layers and facing wall deformation. The test results showed that in both experiments the walls were in fact designed to behave rigidly and almost no residual displacements were observed on the front of the wall. The most important conclusion drawn from the experimental work was that Geosynthetic Reinforced Retaining Structures designed according to the current specifications behave very successfully under earthquake loading conditions.     

GIS-based microzonation of the Niksar settlement area for the purpose of urban planning (Tokat, Turkey)

Niksar (Tokat) is an urban area located in a seismically active zone of Turkey. The aim of this study is to prepare a GIS-based microzonation map of the Niksar settlement area for the purpose of urban planning. Liquefaction, activity, slope, aspect, fault proximity, ground amplification, and lithology are considered during the overlay analysis, using a multicriteria decision-making analysis of the analytical hierarchy process (AHP) and simple additive weighing (SAW) methods. Based on the resulting evaluations, the study area is divided into four different zones, namely (1) areas suitable for settlement, (2) provisional settlement areas, (3) areas requiring detailed geotechnical investigation, and (4) unsuitable areas. Maps prepared by the SAW and AHP methods are found to be consistent with each other. However, the microzonation map prepared by the AHP method is recommended for the purpose of urban planning because it is able to check its own consistency.     

Toxic Effects of Copper‐Based and Synthetic Organic Pesticides on Activated Sludge

Toxic effects of five commonly used pesticides on the biomass of a municipal activated sludge system were determined on the basis of the reduction in the oxygen uptake rate (OUR) and specific oxygen uptake rate (SOUR). Toxicity levels of the selected pesticides were determined by employing a modified OECD 209 (Organisation for Economic Cooperation and Development) method which was performed as batch experiments using a respirometer. Copper sulphate (CuSO₄ · 5 H₂O), copper oxychloride (Cu₂Cl(OH)₃), copper calcium oxychloride (CaCu₃Cl₂(OH)₆) as copper‐based pesticides and chlorsulphuron (C₁₂H₁₂ClN₅O₄S), 2,4‐dichlorophenoxyacetic acid (2,4‐D) (C₈H₆Cl₂O₃) as synthetic organic pesticides were selected for the experiments. The EC₅₀ values were determined to be 78, 249 and 281 mg/L for CuSO₄ · 5 H₂O, Cu₂Cl(OH)₃ and CaCu₃Cl₂(OH)₆, respectively. Corresponding values for C₁₂H₁₂ClN₅O₄S and 2,4‐D were 860 and 3664 mg/L, respectively. Results indicated that toxicity effects of copper‐based pesticides were higher than that of synthetic organic pesticides. CuSO₄ · 5 H₂O was found to exert the highest toxicity among the copper‐based pesticides, whereas, C₁₂H₁₂ClN₅O₄S was determined to be the most toxic among the organic pesticides on activated sludge biomass.     

Vibration analysis of stepped-pipe strings for mining from deep-sea floors

The present study addresses essentially to the investigation of the longitudinal vibrations of a stepped-pipe string for mining from deep-sea floors. The stepped-pipe string, consisting of four parts having different physical properties in each pipe string segment, is assumed to have two pump modules and a buffer, each of which is equipped with a vibration absorber. Moreover, the pipe string is subjected to external viscous damping because of the surrounding medium. A theoretical analysis has been made for a simplified model of the system, in which it is assumed that both the pump modules and buffer can be considered as concentrated masses, the fluid inside of the pipe string vibrates together with the string, and that the flexible pipe does not affect the vibration of the pipe string. Furthermore, absorbers are modeled as concentrated masses, each of which is attached to pump modules and the buffer by springs and dampers. Applying the method of separation of variables, exact analytical solutions for damped free and forced responses of the system subjected to heave motion of the mining ship are determined with and without absorbers, in which overdamped and underdamped modes are determined and studied separately too. It is important to note that the solutions obtained are expressed in terms of parameters characterizing the physical properties of the system under consideration. Numerical applications show that the attachment of convenient vibration absorbers causes the longitudinal displacements at the certain locations to decrease to very small values, where the vibration absorbers are adjusted to the excitation frequency.     

Swell pressure prediction by suction methods

Soil suction is the most relevant soil parameter for characterization of the swell behavior. An attempt was made to predict swell pressures from soil suction measurements. In this study, Na-bentonite was mixed with kaolinite in the ratios of 5, 10, 15, 20 and 25% of dry kaolinite weight to obtain soils in a wide range of plasticity indices (i.e. 30, 50, 68, 84 and 97%). Suction measurements using thermocouple psychrometer technique were made on statically compacted specimens. The dependence of soil suction on water content, dry density and bentonite content was examined. Soil suction was correlated to the soil properties, namely, water content, plasticity index, dry density, cation exchange capacity and specific surface area using multiple regression analyses. The correlations revealed a simple regression equation for a quick prediction of soil suctions from easily determined soil properties. In order to investigate soil suction versus swell pressure behavior, the results of standard constant volume swell tests (ASTM, 1990) performed on statically compacted samples of these clay mixtures were used. A linear relationship was established between the logarithm soil suction and the swell pressure. It was also found that an experimental relationship which would directly relate the initial soil suction to the swell pressure can be established.     

The sources of metal contents in the shelf sediments from the Marmara Sea, Turkey

The shelf area is the largest morphological unit of the Marmara Sea and is subjected to increasing population, urbanization, and industrial activities. Metal contents (Al, Fe, Mn, Cu, Pb, Zn, Ni, Cr, Co and Hg) of the surface sediments from the shelf areas of the Marmara Sea generally do not indicate shelf-wide pollution. The variability of the metal contents of the shelf sediments is mainly governed by the geochemical differences in the northern and southern hinterlands. Northern shelf sediments contain lower values compared to those of the southern shelf, where higher Ni, Cr, Pb, Cu and Zn are derived from the rock formations and mineralized zones. However, besides from the natural high background in the southern shelf, some anthropogenic influences are evident from EF values of Pb, Zn and Cu, and also from their high mobility in the semi-isolated bay sediments. Anthropogenic influences are found to be limited at the confluence of Istanbul Strait in the northern shelf. However, suspended sediments along the shallow parts of the northern shelf were found to be enriched in Pb and Hg and to a lesser degree in Zn, reflecting anthropogenic inputs from Istanbul Metropolitan and possibly from the Black Sea via the Istanbul Strait.     

Seismic landslide analysis: Gurpinar (Istanbul) as a case history

Slope failures triggered by earthquakes are among the most important soil mechanics problems. In this study, static and pseudostatic analyses of slope stability for earthquake conditions were carried out in the Gurpinar area. In situ testing (SPT) was carried out and laboratory samples were obtained from six boreholes (maximum depth 50.0 m) to determine soil classification and strength characteristics. Geophysical studies (seismic refraction and MASW) were also carried out in the area to estimate the structure and stiffness strength characteristics of the slope to 50.0 m depth. All field and laboratory data were used to determine the mechanical and structural (geometrical) behavior of the slope. In order to solve the slope stability problem, three soil slope models were considered. Pseudostatic analysis was carried out to estimate the earthquake acceleration seismic hazard in the region. These analyses showed that, while there was no potential slope instability under static load conditions, some problems would appear with increasing earthquake acceleration. A geotechnical slope improvement project is proposed for the study area.