AOX‐Bildung bei der sonolytischen Oxidation von Salicylsäure in Gegenwart von Chlorid

AOX‐formation by the Sonochemical Treatment of Salicylic Acid in Presence of Chloride Ultrasound shows great potential for improving water, wastewater and sludge treatment processes. However, a number of questions exist: for example the influence of suspended solids or salts. In this paper the influence of chloride in view of AOX‐formation should be investigated. As organic model compound salicylic acid (0.05…1 mmol/L) was used. Formation of AOX (adsorbable organically bound halogens) was measured in dependence upon chloride concentrations (1.4…141 mmol/L) and pH 2 and 9. Ultrasound irradiation was performed in glass reactor (500 mL) at 206 kHz and 353 kHz by continuous bubbling argon:oxgen (4:1) at a flow rate of 1 L/min into the solutions. The elimination of salicylic acid and the formation of hydrogen peroxide were not influenced by the presence of chloride (up to 56 mmol/L). The rate of salicylic acid elimination and the formation rate of hydrogen peroxide are at concentrations of mmol/(L min) levels but those of AOX formation of μmol/(L min) levels. The reactions leading to chlorinated by‐products can be seen as minor reaction paths. The yield of AOX depending on frequency, pH and chloride concentration lies between 10 μg/L and 900 μg/L. In acidic medium they were twice as high as in basic medium. Below the ratio chloride : salicylic acid of 2 mol/mol, AOX could not be identified.     

Segmentation of the Nazca and South American plates along the Ecuador subduction zone from wide angle seismic profiles

We describe the deep structure of the south Colombian–northern Ecuador convergent margin using travel time inversion of wide-angle seismic data recently collected offshore. The margin appears segmented into three contrasting zones. In the North Zone, affected by four great subduction earthquakes during the 20th century, normal oceanic crust subducts beneath the oceanic Cretaceous substratum of the margin underlined by seismic velocities as high as 6.0–6.5 km/s. In the Central Zone the subducting oceanic crust is over-thickened beneath the Carnegie Ridge. A steeper slope and a well-developed, high velocity, Cretaceous oceanic basement characterizes the margin wedge. This area coincides with a gap in significant subduction earthquake activity. In the South Zone, the subducting oceanic crust is normal. The fore-arc is characterized by large sedimentary basins suggesting significant subsidence. Velocities in the margin wedge are significantly lower and denote a different nature or a higher degree of fracturing.

Even if the distance between the three profiles exceeds 150 km, the structural segmentation obtained along the Ecuadorian margin correlates well with the distribution of seismic activity and the neotectonic zonation.     

Vergleichende Betrachtungen zur Talausbildung Schwedischer und hessischer Flüsse

Ohne ZusammenfassungTitularbeitrag.     

Mapping of the post-collisional cooling history of the Eastern Alps

We present a database of geochronological data documenting the post-collisional cooling history of the Eastern Alps. This data is presented as (a) georeferenced isochrone maps based on Rb/Sr, K/Ar (biotite) and fission track (apatite, zircon) dating portraying cooling from upper greenschist/amphibolite facies metamorphism (500–600 °C) to 110 °C, and (b) as temperature maps documenting key times (25, 20, 15, 10 Ma) in the cooling history of the Eastern Alps. These cooling maps facilitate detecting of cooling patterns and cooling rates which give insight into the underlying processes governing rock exhumation and cooling on a regional scale.The compilation of available cooling-age data shows that the bulk of the Austroalpine units already cooled below 230 °C before the Paleocene. The onset of cooling of the Tauern Window (TW) was in the Oligocene-Early Miocene and was confined to the Penninic units, while in the Middle- to Late Miocene the surrounding Austroalpine units cooled together with the TW towards near surface conditions.High cooling rates (50 °C/Ma) within the TW are recorded for the temperature interval of 375–230 °C and occurred from Early Miocene in the east to Middle Miocene in the west. Fast cooling post-dates rapid, isothermal exhumation of the TW but was coeval with the climax of lateral extrusion tectonics. The cooling maps also portray the diachronous character of cooling within the TW (earlier in the east by ca. 5 Ma), which is recognized within all isotope systems considered in this study.Cooling in the western TW was controlled by activity along the Brenner normal fault as shown by gradually decreasing ages towards the Brenner Line. Cooling ages also decrease towards the E–W striking structural axis of the TW, indicating a thermal dome geometry. Both cooling trends and the timing of the highest cooling rates reveal a strong interplay between E–W extension and N–S orientated shortening during exhumation of the TW.     

Late Mesozoic high-K calc-alkaline magmatism in Southeast China: the Tongling example

ABSTRACT

We report new zircon U–Pb ages, Hf isotopic and geochemical results for the Tongling granitic plutons of Southeast China. SHRIMP U–Pb ages for the Miaojia quartz monzodiorite porphyrite,the Tianebaodan and Tongguanshan quartz monzodiorites, the Xinqiaotou granodiorite porphyry, and the Shatanjiao and Nanhongchong granodiorite are 143 ± 2, 141 ± 1 and 142 ± 1, 147 ± 1, and 145 ± 1 and 139 ± 1 Ma, respectively. Combined with previous geochronological data, our results indicate that the porphyritic rocks are older than rocks of the same type lacking porphyritic texture. Geochemically, these high-K calc-alkaline intrusive rocks are characterized by arc-like trace element distribution patterns, with significant enrichment in LILE and LREE but depletion in HFSE. Lu–Hf isotopic compositions of zircons from the high-K calc-alkaline (HKCA) rocks have ε_Hf(t) values of magmatic 139–147 Ma zircons from ?8.1 to ?25.6, with two-stage model ages (t_DM2) of 1.71–2.67 Ga, whereas ε_Hf(t) values of inherited 582–844 Ma zircons range from 5.4 to ?9.5, with t_DM2 of 1.39–2.22 Ma, younger than t_DM2 values of igneous zircon, indicating that newly formed mantle material was added to the continental crust of the Yangtze Block. Moreover, ε_Hf(t) values of inherited zircon cores older than 1000 Ma are from ?7.8 to ?26, similar to magmatic zircons, and the t_DM2 values are all greater than 3.0 Ga (3.16–3.75 Ga), reflecting partial melting of ancient sialic material. We conclude that the plutonic melts were derived from both the enriched mantle and the ancient crust. The HKCA Tongling intrusions coincide temporally with the J₃–K₁ magmatic event that was widespread in Southeast China. This igneous activity may have accompanied sinistral slip along the Tan-Lu fault due to oblique subduction of the Palaeo-Pacific plate.     

GSD‐1G and MPI‐DING Reference Glasses for In Situ and Bulk Isotopic Determination

This paper contains the results of an extensive isotopic study of United States Geological Survey GSD‐1G and MPI‐DING reference glasses. Thirteen different laboratories were involved using high‐precision bulk (TIMS, MC‐ICP‐MS) and microanalytical (LA‐MC‐ICP‐MS, LA‐ICP‐MS) techniques. Detailed studies were performed to demonstrate the large‐scale and small‐scale homogeneity of the reference glasses. Together with previously published isotopic data from ten other laboratories, preliminary reference and information values as well as their uncertainties at the 95% confidence level were determined for H, O, Li, B, Si, Ca, Sr, Nd, Hf, Pb, Th and U isotopes using the recommendations of the International Association of Geoanalysts for certification of reference materials. Our results indicate that GSD‐1G and the MPI‐DING glasses are suitable reference materials for microanalytical and bulk analytical purposes.     

Volatiles in a peralkaline system: Abiogenic hydrocarbons and F–Cl–Br systematics in the naujaite of the Ilímaussaq intrusion, South Greenland

Agpaitic rocks comprise most of the exposed part of the 1.16 Ga old, 8 × 17 km large and about 1700 m thick Ilímaussaq intrusion in South Greenland. Within these, more than 600 m thick sequence of sodalite-rich “naujaites” (mainly sodalite + arfvedsonite + alkali feldspar + nepheline + eudialyte + aenigmatite) are interpreted as a sodalite flotation cumulate. Sodalites show two to three different zones in cathodoluminescence (CL) and at least two zones in thin sections. The CL zones can be related to chemical differences detectable by electron microprobe, whereas relations with optical zonations are less obvious. Compositional trends in sodalite reflect trends in the evolution of volatile contents in the melt. The sodalite at Ilímaussaq is almost free of Ca and closely corresponds to the pure Na–Cl sodalite endmember with about 7 wt.% of Cl; S contents reach up to 0.9 wt.%. Cl/Br ratios range from 500 to 1700. Raman spectroscopy shows that S is present as [SO₄]²⁻ in sodalite, although sphalerite (ZnS) is a stable phase in naujaites. Peralkalinity and fO₂ conditions allow S²⁻ and [SO₄]²⁻ to be present contemporaneously.

The whole naujaite sequence is divided into two parts, an upper part with low, homogeneous S contents and Cl/Br ratios in the sodalite cores, and a lower part with strongly variable and higher S contents and with Cl/Br ratios, which are decreasing downwards. The details of the S content and the Cl/Br ratio evolution show that sodalite strongly influences the halogen contents of the melt by scavenging Cl and Br.

The naujaites were formed from a highly reduced, halogen-rich magma in equilibrium with magmatic methane at about 800 °C, which, upon ascent, cooling and fractionation, exsolved an aqueous fluid phase. Both fluids were trapped in separate inclusions indicating their immiscibility.

Micrometer-sized aegirine crystals and primary hydrocarbon-bearing inclusions are abundant in the crystal cores. The inclusions were trapped at pressures up to 4 kbar, although the emplacement pressure of the intrusion is about 1 kbar. This indicates growth of the sodalite during melt ascent and a very effective mechanism of trace element scavenging during sodalite growth. Sodalite rims are devoid of aegirine or primary hydrocarbon inclusions and probably reflect the emplacement stage.