Cloud formation along mountain ridges on Titan

Cassini radar passes have shown a number of mountain ranges on Titan. Radar data covering approximately one quarter of Titan's surface places mountains in primarily equatorial regions with the mean height of about 900 m. The flow of air over topographic features can both trigger and enhance cloud formation. Orographically induced clouds near terrestrial mountain ranges include shallow wave clouds produced from upslope flow as well as precipitating stratus and cumulus type clouds; mountains can provide the perturbations needed to trigger convective clouds. The Titan regional atmospheric modeling system (TRAMS) has been used to explore a number of convective cloud properties and is now used to report on clouds formed when a mountain peak is placed within the model domain. Using a range of heights and surface winds compatible with Cassini/Huygens data, constraints can be placed on the scenarios in which clouds can be expected to form. Given sufficiently humid conditions (at least 50% humidity), convection is triggered. For drier environments similar to the Huygens landing site, short-lived, optically thin clouds form from air rising upslope. Precipitation is also seen in the cases of the convective clouds, which could have implications for the eroded appearance of Titan's mountains.     

Thermal conductivity measurements of coarse-grained gravel materials using a hollow cylindrical sensor

We report on new results for the thermal conductivity of granular materials, in particular large-grained gravels. For these measurements, a cylindrical-shaped heated sensor was developed and used, which allows to include gravels with grain sizes in the several centimeter size range into the investigation. Such materials are, among else, important as construction materials for road and railway embankments. Measurements were done at different gas pressure levels (from normal atmospheric level down to the millibar range) and for dry and wet conditions. The results of the low pressure measurements may become relevant in view of possible applications on other planetary bodies, like at the surface of the planet Mars, which will be explored in the coming decade by in situ geotechnical methods.     

Variable effects of labile carbon on the carbon use of different microbial groups in black slate degradation

Weathering of ancient organic matter contributes significantly to biogeochemical carbon cycles over geological times. The principle role of microorganisms in this process is well recognized. However, information is lacking on the contribution of individual groups of microorganisms and on the effect of labile carbon sources to the degradation process. Therefore, we investigated the contribution of fungi, Gram-positive and Gram-negative bacteria in the degradation process using a column experiment. Investigations were performed on low metamorphic black slates. All columns contained freshly crushed, sieved (0.63-2 mm), not autoclaved black slates. Two columns were inoculated with the lignite-degrading fungus Schizophyllum commune and received a culture medium containing ¹³C labeled glucose, two columns received only this culture medium and two control columns received only water.The total mass balance was calculated from all carbon added to the slate and the CO₂ and DOC losses. Phospholipid fatty acids (PLFA) were extracted to investigate microbial communities. We used both the compound specific ¹⁴C and ¹³C signal of the PLFA to quantify carbon uptake from black slates and the glucose of the culture medium, respectively.The total carbon loss in these columns exceeded the amount of added carbon by approximately 60%, indicating that black slate carbon has been used. PLFA associated with Gram-positive bacteria dominated the indigenous community and took up 22% of carbon from black slate carbon, whereas PLFA of Gram-negative bacteria used only 8% of carbon from the slates. PLFA of Gram-negative bacteria and fungi were both mostly activated by the glucose addition. The added Schizophyllum did not establish well in the columns and was overgrown by the indigenous microbial community. Our results suggest that especially Gram-positive bacteria are able to live on and degrade black slate material. They also benefit from easy degradable carbon from the nutrient broth. In natural environments priming due to root exudates might consequently enhance weathering.     

Lead coprecipitation with iron oxyhydroxide nano-particles

Pb²⁺ and Fe³⁺ coprecipitation was studied with sorption edge measurements, desorption experiments, sorbent aging, High Resolution Transmission and Analytical Electron Microscopy (HR TEM-AEM), and geochemical modeling. Companion adsorption experiments were also conducted for comparison. The macroscopic chemical and near atomic scale HRTEM data supplemented our molecule scale analysis with EXAFS (Kelly et al., 2008). Coprecipitation of Pb²⁺ with ferric oxyhydroxides occurred at ∼pH 4 and is more efficient than adsorption in removing Pb²⁺ from aqueous solutions at similar sorbate/sorbent ratios and pH. X-ray Diffraction (XRD) shows peaks of lepidocrocite and two additional broad peaks similar to fine particles of 2-line ferrihydrite (2LFh). HRTEM of the Pb-Fe coprecipitates shows a mixture of 2-6 nm diameter spheres and 8-20 by 200-300 nm needles, both uniformly distributed with Pb²⁺. Geochemical modeling shows that surface complexation models fit the experimental data of low Pb:Fe ratios when a high site density is used. Desorption experiments show that more Pb²⁺ was released from loaded sorbents collected from adsorption experiments than from Pb to Fe coprecipitates at dilute EDTA concentrations. Desorbed Pb²⁺ versus dissolved Fe³⁺ data show a linear relationship for coprecipitation (CPT) desorption experiments but a parabolic relationship for adsorption (ADS) experiments.Based on these results, we hypothesize that Pb²⁺ was first adsorbed onto the nanometer-sized, metastable, iron oxyhydroxide polymers of 2LFh with domain size of 2-3 nm. As these nano-particles assembled into larger particles, some Pb²⁺ was trapped in the iron oxyhydroxide structure and re-arranged to form solid solutions. Therefore, the CPT contact method produced more efficient removal of Pb²⁺ than the adsorption contact method, and Pb²⁺ bound in CPT solids represent a more stable sequestration of Pb²⁺ in the environment than Pb²⁺ adsorbed on iron oxyhydroxide surfaces.     

Insight into the development of a carbonate platform through a multi-disciplinary approach: a case study from the Upper Devonian slope deposits of Mount Freikofel (Carnic Alps,Austria/Italy)

The development and behavior of million year-scaled depositional sequences recorded within Palaeozoic carbonate platform has remained poorly examined. Therefore, the understanding of palaeoenvironmental changes that occur in geological past is still limited. We herein undertake a multi-disciplinary approach (sedimentology, conodont biostratigraphy, magnetic susceptibility (MS), and geochemistry) of a long-term succession in the Carnic Alps, which offers new insights into the peculiar evolution of one of the best example of Palaeozoic carbonate platform in Europe. The Freikofel section, located in the central part of the Carnic Alps, represents an outstanding succession in a fore-reef setting, extending from the Latest Givetian (indet. falsiovalis conodont zones) to the Early Famennian (Lower crepida conodont zone). Sedimentological analysis allowed to propose a sedimentary model dominated by distal slope and fore-reef-slope deposits. The most distal setting is characterized by an autochthonous pelagic sedimentation showing local occurrence of thin-bedded turbiditic deposits. In the fore-reef slope, in a more proximal setting, there is an accumulation of various autochthonous and allochthonous fine- to coarse-grained sediments originated from the interplay of gravity-flow currents derived from the shallow-water and deepwater area. The temporal evolution of microfacies in the Freikofel section evolves in two main steps corresponding to the Freikofel (Unit 1) and the Pal (Unit 2) limestones. Distal slope to fore-reef lithologies and associate changes are from base to top of the section: (U1) thick bedded litho- and bioclastic breccia beds with local fining upward sequence and fine-grained mudstone intercalations corresponding, in the fore-reef setting, to the dismantlement of the Eifelian–Frasnian carbonate platform during the Early to Late Frasnian time (falsiovalis to rhenana superzones) with one of the causes being the Late Givetian major rift pulse; (U2) occurrence of thin-bedded red nodular and cephalopod-bearing limestones with local lithoclastic grainstone intercalations corresponding to a significant deepening of the area and the progressive withdrawal of sedimentary influxes toward the basin, in relation with Late Frasnian sea-level rise. MS and geochemical analyses were also performed along the Freikofel section and demonstrate the inherent parallel link existing between variation in MS values and proxy for terrestrial input. Interpretation of MS in terms of palaeoenvironmental processes reflects that even though distality remains the major parameter influencing MS values, carbonate production and water agitation also play an important role.     

Localised strain in fissured clays: the combined effect of fissure orientation and confining pressure

Acta Geotechnica - This paper reports the main results of an experimental study on the mechanics of intensely fissured natural clays, extending our previous studies on scaly clay from Santa Croce...     

Climate change impact on precipitation for the Amazon and La Plata basins

We analyze the local and remote impacts of climate change on the hydroclimate of the Amazon and La Plata basins of South America (SA) in an ensemble of four 21st century projections (1970–2100, RCP8.5 scenario) with the regional climate model RegCM4 driven by the HadGEM, GFDL and MPI global climate models (GCMs) over the SA CORDEX domain. Two RegCM4 configurations are used, one employing the CLM land surface and the Emanuel convective schemes, and one using the BATS land surface and Grell (over land) convection schemes. First, we find considerable sensitivity of the precipitation change signal to both the driving GCM and the RegCM4 physics schemes (with the latter even greater than the first), highlighting the pronounced uncertainty of regional projections over the region. However, some improvements in the simulation of the annual cycle of precipitation over the Amazon and La Plata basins is found when using RegCM4, and some consistent change signals across the experiments are found. One is a tendency towards an extension of the dry season over central SA deriving from a late onset and an early retreat of the SA monsoon. The second is a dipolar response consisting of reduced precipitation over the broad Amazon and Central Brazil region and increased precipitation over the La Plata basin and central Argentina. An analysis of the relative influence on the change signal of local soil-moisture feedbacks and remote effects of Sea Surface Temperature (SST) over the Niño 3.4 region indicates that the former is prevalent over the Amazon basin while the latter dominates over the La Plata Basin. Also, the soil moisture feedback has a larger role in RegCM4 than in the GCMs.     

Potentials and constraints of different types of soil moisture observations for flood simulations in headwater catchments

Flood generation in mountainous headwater catchments is governed by rainfall intensities, by the spatial distribution of rainfall and by the state of the catchment prior to the rainfall, e.g. by the spatial pattern of the soil moisture, groundwater conditions and possibly snow. The work presented here explores the limits and potentials of measuring soil moisture with different methods and in different scales and their potential use for flood simulation. These measurements were obtained in 2007 and 2008 within a comprehensive multi-scale experiment in the Weisseritz headwater catchment in the Ore-Mountains, Germany. The following technologies have been applied jointly thermogravimetric method, frequency domain reflectometry (FDR) sensors, spatial time domain reflectometry (STDR) cluster, ground-penetrating radar (GPR), airborne polarimetric synthetic aperture radar (polarimetric SAR) and advanced synthetic aperture radar (ASAR) based on the satellite Envisat. We present exemplary soil measurement results, with spatial scales ranging from point scale, via hillslope and field scale, to the catchment scale. Only the spatial TDR cluster was able to record continuous data. The other methods are limited to the date of over-flights (airplane and satellite) or measurement campaigns on the ground. For possible use in flood simulation, the observation of soil moisture at multiple scales has to be combined with suitable hydrological modelling, using the hydrological model WaSiM-ETH. Therefore, several simulation experiments have been conducted in order to test both the usability of the recorded soil moisture data and the suitability of a distributed hydrological model to make use of this information. The measurement results show that airborne-based and satellite-based systems in particular provide information on the near-surface spatial distribution. However, there are still a variety of limitations, such as the need for parallel ground measurements (Envisat ASAR), uncertainties in polarimetric decomposition techniques (polarimetric SAR), very limited information from remote sensing methods about vegetated surfaces and the non-availability of continuous measurements. The model experiments showed the importance of soil moisture as an initial condition for physically based flood modelling. However, the observed moisture data reflect the surface or near-surface soil moisture only. Hence, only saturated overland flow might be related to these data. Other flood generation processes influenced by catchment wetness in the subsurface such as subsurface storm flow or quick groundwater drainage cannot be assessed by these data. One has to acknowledge that, in spite of innovative measuring techniques on all spatial scales, soil moisture data for entire vegetated catchments are still today not operationally available. Therefore, observations of soil moisture should primarily be used to improve the quality of continuous, distributed hydrological catchment models that simulate the spatial distribution of moisture internally. Thus, when and where soil moisture data are available, they should be compared with their simulated equivalents in order to improve the parameter estimates and possibly the structure of the hydrological model.     

Barium uptake and adsorption in diatoms

Using trace metal-defined culture conditions, we measured the cellular barium concentration in cultures of the diatom Thalassiosira weissflogii. In cultures with low Fe concentration, at a typical surface seawater Ba concentration of 35 to 40 nmol/L, the cellular Ba was 0.5 μmol/mol P (∼0.04 μg/g dw), much below all previously published values for phytoplankton. When the Fe concentration in the growth medium was increased, the measured “cellular” Ba increased proportionally to the particulate Fe. Under conditions of ferric hydroxide precipitation, similar particulate Ba concentrations were measured in the absence and the presence of cells for a given concentration of particulate Fe. Thus, the bulk of the particulate Ba in such experiments was not truly intracellular but adsorbed on precipitated Fe hydroxides associated with the cell surface. A similar mechanism likely explains the high cellular Ba concentrations reported by previous investigators who utilized relatively high ratios of Fe to EDTA concentrations in the growth medium, resulting in Fe precipitation. On the basis of our results, it seems highly unlikely that intracellular uptake by living phytoplankton explains the vertical flux of Ba in oceanic waters. But the adsorption of Ba on Fe hydroxides that is seen in laboratory experiments must also occur in the oceans and contribute to Ba transport in the upper part of the water column. To be significant, however, such a mechanism would require that the particles that transport Ba out of the surface have a markedly lower Ba/Fe ratio than is measured in the average suspended material.