Monitoring Mutagenic Pollution of Small Rivers

The importance of sampling frequency in the course of monitoring of mutagenic pollution of small rivers is shown, the Kotorosl River (a tributary of the Volga River) being taken as an example. In working out a sampling program, due consideration should be given for seasonal variations of the river hydrological regime and input of pollutants. Incorrect choice of sampling frequency may lead to one of the principal reasons for improper assessment of toxicogenetic situation. A water sampling program has been proposed for the Kotorosl River studies based on monitoring.__________Translated from Vodnye Resursy, Vol. 32, No. 3, 2005, pp. 347–351.Original Russian Text Copyright © 2005 by Fomicheva, Prokhorova.     

Assessment of the Geochemical Background and Anthropogenic Load by Bioaccumulation of Microelements in Fish

Comparative characteristic of several microelements (Ni, Cu, Sr, Al, Zn, Co, Mn, Pb, Cd, Hg, As) found in fish (case study of breams in the Volga basin reservoirs) is presented. Regularities of accumulation of these elements in fish depending on their concentration in the water are analyzed. Main disturbances in fish caused by the accumulation of microelements in their organs and tissues are considered.     

When 4D seismic is not applicable: Alternative monitoring scenarios for the Arab-D reservoir in the Ghawar Field

Ghawar, the largest oilfield in the world, produces oil from the Upper Jurassic Arab‐D carbonate reservoir. The high rigidity of the limestone–dolomite reservoir rock matrix and the small contrast between the elastic properties of the pore fluids, i.e. oil and water, are responsible for the weak 4D seismic effect due to oil production. A feasibility study was recently completed to quantify the 4D seismic response of reservoir saturation changes as brine replaced oil. The study consisted of analysing reservoir rock physics, petro‐acoustic data and seismic modelling. A seismic model of flow simulation using fluid substitution concluded that time‐lapse surface seismic or conventional 4D seismic is unlikely to detect the floodfront within the repeatability of surface seismic measurements. Thus, an alternative approach to 4D seismic for reservoir fluid monitoring is proposed. Permanent seismic sensors could be installed in a borehole and on the surface for passive monitoring of microseismic activity from reservoir pore‐pressure perturbations. Reservoir production and injection operations create these pressure or stress perturbations. Reservoir heterogeneities affecting the fluid flow could be mapped by recording the distribution of epicentre locations of these microseisms or small earthquakes. The permanent borehole sensors could also record repeated offset vertical seismic profiling surveys using a surface source at a fixed location to ensure repeatability. The repeated vertical seismic profiling could image the change in reservoir properties with production.     

Numerical modelling of interface scattering of seismic wavefield from a random rough interface in an acoustic medium: comparison between 2D and 3D cases

Seismic wavefield scattering from a statistically randomly rough interface in a multilayered piecewise homogeneous medium is studied in 3D. The influence of the surface roughness on the scattered wavefield is analysed numerically by using a finite‐difference operator in the acoustic domain. Since interface scattering in the real practical sense is a 3D physical phenomenon, we show in this work that the scattering response of a randomly rough interface is not the same in 3D situations as in the 2D cases described in some earlier works. For a given interface roughness height in 3D, an interface roughness height at least three times greater is required to produce an equivalent phase scattering effect in 2D situations, for a given correlation length of the interface roughness scale. Based on observations from spectral analysis, we show that scattering results principally in de‐phasing and frequency band‐limiting of the incident wavefront, the frequency band‐limiting properties being comparable to cases reported in the literature for absorption and thin‐layer filtering. The interface scattering phenomenon should be critically considered when using amplitude and phase information from seismic signal during inversion processes.     

Roles for fluid and/or melt advection in forming high-P mafic migmatites, Fiordland, New Zealand

A series of striking migmatitic structures occur in rectilinear networks through western Fiordland, New Zealand, involving, for the most part, narrow anorthositic dykes that cut hornblende‐bearing orthogneiss. Adjacent to the dykes, host rocks show patchy, spatially restricted recrystallization and dehydration on a decimetre‐scale to garnet granulite. Although there is general agreement that the migration of silicate melt has formed at least parts of the structures, there is disagreement on the role of silicate melt in dehydrating the host rock. A variety of causal processes have been inferred, including metasomatism due to the ingress of a carbonic, mantle‐derived fluid; hornblende‐breakdown leading to water release and limited partial melting of host rocks; and dehydration induced by volatile scavenging by a migrating silicate melt. Variability in dyke assemblage, together with the correlation between dehydration structures and host rock silica content, are inconsistent with macroscopic metasomatism, and best match open system behaviour involving volatile scavenging by a migrating trondhjemitic liquid.     

Preliminary Characterisation of New Glass Reference Materials (GSA-1G, GSC-1G, GSD-1G and GSE-1G) by Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry Using 193 nm, 213 nm and 266 nm Wavelengths

New glass reference materials GSA-1G, GSC-1G, GSD-1G and GSE-1G have been characterised using a prototype solid state laser ablation system capable of producing wavelengths of 193 nm, 213 nm and 266 nm. This system allowed comparison of the effects of different laser wavelengths under nearly identical ablation and ICP operating conditions. The wavelengths 213 nm and 266 nm were also used at higher energy densities to evaluate the influence of energy density on quantitative analysis. In addition, the glass reference materials were analysed using commercially available 266 nm Nd:YAG and 193 nm ArF excimer lasers. Laser ablation analysis was carried out using both single spot and scanning mode ablation. Using laser ablation ICP-MS, concentrations of fifty-eight elements were determined with external calibration to the NIST SRM 610 glass reference material. Instead of applying the more common internal standardisation procedure, the total concentration of all element oxide concentrations was normalised to 100%. Major element concentrations were compared with those determined by electron microprobe. In addition to NIST SRM 610 for external calibration, USGS BCR-2G was used as a more closely matrix-matched reference material in order to compare the effect of matrix-matched and non matrix-matched calibration on quantitative analysis. The results show that the various laser wavelengths and energy densities applied produced similar results, with the exception of scanning mode ablation at 266 nm without matrix-matched calibration where deviations up to 60% from the average were found. However, results acquired using a scanning mode with a matrix-matched calibration agreed with results obtained by spot analysis. The increased abundance of large particles produced when using a scanning ablation mode with NIST SRM 610, is responsible for elemental fractionation effects caused by incomplete vaporisation of large particles in the ICP.     

Morphological and microtectonic analysis of Quaternary deformation from Puná and Santa Clara Islands, Gulf of Guayaquil, Ecuador (South America)

This paper presents the neotectonic study of Santa Clara and Puná Islands sited in the Gulf of Guayaquil eastern part. Both islands are located on the south-western segment of the fault zone bounding to the east the North Andean Block. Fault motion and morphostructural analysis were carried out from Pleistocene age terrain. A two step deformation characterises the South Puná tectonics. The first step involves the Zambapala Cordillera uplift that post-dates Pleistocene sediments and pre-dates a marine terrace correlated with the M.I.S. 11 or 13 (440–550 ka). The second step is the formation of a pull-apart that shows evidence of 2.9 km dextral offset since the M.I.S. 11 or 13, giving an offset mean rate of 5.3 to 6.6 mm/yr. This rate is higher than the one calculated on the Pallatanga Fault northeast of the study area, in the Western Andean Cordillera, suggesting that deformation is split in different fault segments from the Gulf of Guayaquil to the continent. The Zambapala Cordillera uplift and transpression deformation requires a compressive event that may have been induced by the subduction process during the early Pleistocene.     

Age and tectonostratigraphic significance of the Upper Carboniferous series in the basement of the Andean Frontal Cordillera: Geodynamic implications

The age and tectonosedimentary environment of the Palaeozoic sediments on the Frontal Cordillera is not well known and earlier studies have been unable to satisfactorily explain the geological history of the basement of the Andes.In the vicinity of the old Castaño Viejo mine crop out various levels of partially metamorphosed microbialite limestones, which alternate with thin marly–lutitic interstrata. These levels contain abundant palynomorph remains, which allow the series to be dated as Silurian–Devonian. These data, together with the presence of warm climate fossils, lend support to the hypothesis of a major allochtony of the Chilenia Terrane (of which the Frontal Cordillera formed part), relative to the Cuyania Terrane (which included the Precordillera), prior to their amalgamation.Upper Carboniferous palynomorphs found during this study occur in association with resedimented palynomorphs and chitinozoa, of possible Devonian age. This demonstrates the equivalence of both fossiliferous series and their location within the upper part of the Upper Carboniferous Agua Negra Fm. The Silurian–Devonian elements, deformed during a phase prior to the Gondwanic orogeny, were eroded and transported to the foreland basin during the Upper Carboniferous.The palynomorph associations found in all samples correspond to the Ancistrospora palynological zone and to the Raistrickia densa–Convolutispora muriornata Biozone, which are indicative of Upper Carboniferous times. Characteristic forms such as Ancistrospora verrucosa and C. muriornata, both indicative of an Upper Carboniferous age, were found in samples from the Castaño Viejo area.Earlier interpretations of the Frontal Cordillera attributing the sedimentation to a palaeo-latitude at some distance from Gondwana, were based on the presence of Silurian–Devonian hot water stromatolithic limestones. Our results suggest that Cuyania and Chilenia were not necessarily separated by a great distance before their amalgamation. This in turn means that a large ocean was not necessarily consumed in the process.     

Upper mantle structure of the South American continent and neighboring oceans from surface wave tomography

We present a new three-dimensional SV-wave velocity model for the upper mantle beneath South America and the surrounding oceans, built from the waveform inversion of 5850 Rayleigh wave seismograms. The dense path coverage and the use of higher modes to supplement the fundamental mode of surface waves allow us to constrain seismic heterogeneities with horizontal wavelengths of a few hundred kilometres in the uppermost 400 km of the mantle.The large scale features of our tomographic model confirm previous results from global and regional tomographic studies (e.g. the depth extent of the high velocity cratonic roots down to about 200–250 km).Several new features are highlighted in our model. Down to 100 km depth, the high velocity lid beneath the Amazonian craton is separated in two parts associated with the Guyana and Guapore shields, suggesting that the rifting episode responsible for the formation of the Amazon basin has involved a significant part of the lithosphere. Along the Andean subduction belt, the structure of the high velocity anomaly associated with the sudbduction of the Nazca plate beneath the South American plate reflects the along-strike variation in dip of the subducting plate. Slow velocities are observed down to about 100 km and 150 km at the intersection of the Carnegie and Chile ridges with the continent and are likely to represent the thermal anomalies associated with the subducted ridges. These lowered velocities might correspond to zones of weakness in the subducted plate and may have led to the formation of “slab windows” developed through unzipping of the subducted ridges; these windows might accommodate a transfer of asthenospheric mantle from the Pacific to the Atlantic ocean. From 150 to 250 km depth, the subducting Nazca plate is associated with high seismic velocities between 5°S and 37°S. We find high seismic velocities beneath the Paraná basin down to about 200 km depth, underlain by a low velocity anomaly in the depth range 200–400 km located beneath the Ponta Grossa arc at the southern tip of the basin. This high velocity anomaly is located southward of a narrow S-wave low velocity structure observed between 200 and 500–600 km depth in body wave studies, but irresolvable with our long period datasets. Both anomalies point to a model in which several, possibly diachronous, plumes have risen to the surface to generate the Paraná large igneous province (LIP).