A space Fresnel imager concept assessment study led by CNES for astrophysical applications

In 2009, the Centre National d??Etudes Spatiales (CNES) carried out an assessment study on a ??Fresnel telescope?? concept based on a two-spacecraftformation flying configuration. This concept uses a binary Fresnel zone plate, and the principle of diffraction focusing, which allows high resolution optical imaging for astrophysics. In addition to CNES, the Laboratoire d??Astrophysique de Toulouse Tarbes (LATT) was deeply involved at two levels: through Research & Technology (R&T) studies to simulate and validate on a test bench the Fresnel concept performance, and through active participation in the CNES team for the optical aspects and to define the astrophysical fields of Fresnel-based space missions. The study was conducted within the technical limitations that resulted from a compromise between the R&T state of the art and the potential scientific domains of interest. The main technical limitations are linked to the size of the primary Fresnel array and to its usable spectral bandwidth. In this framework, the study covers ambitious architectures, correlating the technology readiness of the main critical components with the time-scale and programmatic horizons. The possible scientific topics arise from this range of missions. In this paper, I present a mission launched by a Soyuz, dedicated to astrophysics in the Ultra Violet (UV) band: 120 to 300 nm using a 4-m Fresnel array. It could be competitive in the next fifteen years, whereas a 10-m aperture mission in different bands; UV, visible or Infra Red (IR) (up to 6 ??m) could be achievable in the future. Larger missions, using a primary array larger than 20 m, request technologies not yet available but that will probably be based on new inflatable structures with membranes, as already tested in the USA for other ends.     

From whom Bells tolls: Reclassifying Bells among CR chondrites and implications for the formation conditions of CR parent bodies

The ungrouped carbonaceous chondrite (CC) Bells has long been considered petrographically similar to CM chondrites based on its matrix abundance and degree of aqueous alteration, but also shows significant isotopic affinities to CR chondrites. Its taxonomic status is thus important for clarifying the relationship of the CRHB (formerly “CR”) clan with other CCs. In this study, we measured the oxygen isotopic compositions of olivines in type I chondrules and isolated olivine grains in Bells. Bells olivines mostly have ∆¹⁷O > −4‰, similar to CR chondrites but unlike other CCs that are rich in refractory inclusions, in which chondrules are generally richer in ¹⁶O. Therefore, Bells is a CR chondrite (albeit an anomalous one), most similar to the rare, matrix-rich CRs like Al Rais. These chondrites (i) may not necessarily derive from the same primary parent body as mainstream CRs, (ii) bear witness to significant variations of the matrix/chondrule ratio within the CRHB clan, and (iii) may be a good analog for samples retrieved by the space mission OSIRIS-REx.     

Application of a semi-spectral cloud water parameterization to cooling tower plumes simulations

In order to simulate the plume produced by large natural draft cooling towers, a semi-spectral warm cloud parameterization has been implemented in an anelastic and non-hydrostatic 3D micro-scale meteorological code. The model results are compared to observations from a detailed field experiment carried out in 1980 at Bugey (location of an electrical nuclear power plant in the Rhône valley in East Central France) including airborne dynamical and microphysical measurements. Although we observe a slight overestimation of the liquid-water content, the results are satisfactory for all the 15 different cases simulated, which include different meteorological conditions ranging from low wind speed and convective conditions in clear sky to high wind and very cloudy. Such parameterization, which includes semi-spectral determination for droplet spectra, seems to be promising to describe plume interaction with atmosphere especially for aerosols and cloud droplets.     

Modeling to evaluate the response of savanna-derived cropland to warming–drying stress and nitrogen fertilizers

Many savannas in West Africa have been converted to croplands and are among the world’s regions most vulnerable to climate change due to deteriorating soil quality. We focused on the savanna-derived cropland in northern Ghana to simulate its sensitivity to projected climate change and nitrogen fertilization scenarios. Here we show that progressive warming–drying stress over the twenty-first century will enhance soil carbon emissions from all kinds of lands of which the natural ecosystems will be more vulnerable to variation in climate variables, particularly in annual precipitation. The carbon emissions from all croplands, however, could be mitigated by applying nitrogen fertilizer at 30–60 kg N ha^???1 year^???1. The uncertainties of soil organic carbon budgets and crop yields depend mainly on the nitrogen fertilization rate during the first 40 years and then are dominated by climate drying stress. The replenishment of soil nutrients, especially of nitrogen through fertilization, could be one of the priority options for policy makers and farm managers as they evaluate mitigation and adaptation strategies of cropping systems and management practices to sustain agriculture and ensure food security under a changing climate.     

Application of Mineral Exploration Models and GIS to Generate Mineral Potential Maps as Input for Optimum Land-Use Planning in the Philippines

The inherent problems of classifying or inventorying potential mineral resources (as opposed to known mineral resources) pose specific challenges. In this paper, the application of a conceptual mineral exploration model and GIS to generate mineral potential maps as input to land-use policy decision-making is illustrated. We implement the criteria provided by a conceptual exploration model for nickeliferous-laterites by using a GIS to classify the nickeliferous-laterite potential of an area in the northeastern part of the Philippines. The spatial data inputs to the GIS are geological map data, topographic map data, and stream sediment point data. Processing of these data yields derivative maps, which are used as indicators of nickeliferous-laterite potential. The indicator maps then are integrated to furnish a nickeliferous-laterite potential map. This map is compared with present land-use classification and policy in the area. The results indicate high potential for nickeliferous-laterite occurrence in the area, but the zones of potential are in places where mineral resources development is prohibited. The prohibition was imposed before the nickeliferous-laterite potential was assessed by this study. Mineral potential classification therefore is a critical input to land-use policy-making so that prospective land is not alienated from future mineral resource development.     

Earthquake detection probability within a seismically quiet area: application to the Bruchsal geothermal field

In applications such as oil and gas production, deep geothermal energy production, underground storage, and mining, it is common practice to implement local seismic networks to monitor and to mitigate induced seismicity. For this purpose, it is crucial to determine the capability of the network to detect a seismic event of predefined magnitude in the target area. The determination of the magnitude of completeness of a network is particularly required to properly interpret seismic monitoring results. We propose a method to compute the detection probability for existing local seismic networks, which (i) strictly follows the applied detection sequence; (ii) estimates the detection capability where seismicity has not yet occurred; and (iii) delivers the results in terms of probabilities. The procedure includes a calibration of a local magnitude scale using regional earthquakes recorded by the network and located outside the monitored area. It involves pre‐processing of the seismograms recorded at each station as performed during the triggering sequence, which is assumed based on amplitude thresholds. Then, the calibrated magnitude–distance–amplitude relations are extrapolated at short distances and combined to reproduce the network detection sequence. This generates a probability to detect a seismic event of a given magnitude at a specified location. This observation‐based approach is an alternative to a fully theoretical detection capability modelling and includes field conditions. Seismic wave attenuation by geometrical spreading and intrinsic attenuation, site effect, and instrumental responses are partly accounted for by the calibration. We apply this procedure on the seismic network deployed in the Bruchsal geothermal field (Germany). Although the system was in good working order, no induced seismicity was identified in the area between June 2010, when monitoring started, and November 2012. The recording of distant seismicity during this time period, however, allowed the application of the proposed procedure. According to the applied network detection parameters, the results indicate that the absence of seismicity can be interpreted as a 95% probability that no seismic event with M_L ≥ 0.7 occurred below the network at 2.4‐km depth, i.e., in the geothermal reservoir.     

European floods during the winter 1783/1784: scenarios of an extreme event during the ‘Little Ice Age’

The Lakagígar eruption in Iceland during 1783 was followed by the severe winter of 1783/1784, which was characterised by low temperatures, frozen soils, ice-bound watercourses and high rates of snow accumulation across much of Europe. Sudden warming coupled with rainfall led to rapid snowmelt, resulting in a series of flooding phases across much of Europe. The first phase of flooding occurred in late December 1783–early January 1784 in England, France, the Low Countries and historical Hungary. The second phase at the turn of February–March 1784 was of greater extent, generated by the melting of an unusually large accumulation of snow and river ice, affecting catchments across France and Central Europe (where it is still considered as one of the most disastrous known floods), throughout the Danube catchment and in southeast Central Europe. The third and final phase of flooding occurred mainly in historical Hungary during late March and early April 1784. The different impacts and consequences of the above floods on both local and regional scales were reflected in the economic and societal responses, material damage and human losses. The winter of 1783/1784 can be considered as typical, if severe, for the Little Ice Age period across much of Europe.     

3D Mineral Prospectivity Mapping with Random Forests: A Case Study of Tongling,Anhui, China

Natural Resources Research - In the past few decades, a variety of data-driven predictive modeling techniques has led to a dramatic advancement in mineral prospectivity mapping (MPM). The random...     

The geochemistry of gem opals as evidence of their origin

Seventy-seven gem opals from ten countries were analyzed by inductively coupled plasma-mass spectrometry (ICP-MS) through a dilution process, in order to establish the nature of the impurities. The results are correlated to the mode of formation and physical properties and are instrumental in establishing the geographical origin of a gem opal. The geochemistry of an opal is shown to be dependant mostly on the host rock, at least for examples from Mexico and Brazil, even if modified by weathering processes. In order of decreasing concentration, the main impurities present are Al, Ca, Fe, K, Na, and Mg (more than 500 ppm). Other noticeable elements in lesser amounts are Ba, followed by Zr, Sr, Rb, U, and Pb. For the first time, geochemistry helps to discriminate some varieties of opals. The Ba content, as well as the chondrite-normalized REE pattern, are the keys to separating sedimentary opals (Ba > 110 ppm, Eu and Ce anomalies) from volcanic opals (Ba < 110 ppm, no Eu or Ce anomaly). The Ca content, and to a lesser extent that of Mg, Al, K and Nb, helps to distinguish gem opals from different volcanic environments. The limited range of concentrations for all elements in precious (play-of-color) compared to common opals, indicates that this variety must have very specific, or more restricted, conditions of formation. We tentatively interpreted the presence of impurities in terms of crystallochemistry, even if opal is a poorly crystallized or amorphous material. The main replacement is the substitution of Si⁴⁺ by Al³⁺ and Fe³⁺. The induced charge imbalance is compensated chiefly by Ca²⁺, Mg²⁺, Mn²⁺, Ba²⁺, K⁺, and Na⁺. In terms of origin of color, greater concentrations of iron induce darker colors (from yellow to “chocolate brown”). This element inhibits luminescence for concentrations above 1000 ppm, whereas already a low content in U (≤ 1 ppm) induces a green luminescence.     

Spatiotemporal characteristics of white mold and impacts on yield in soybean fields in South Dakota

ABSTRACT

White mold of soybeans is one of the most important fungal diseases that affect soybean production in South Dakota. However, there is a lack of information on the spatial characteristics of the disease and relationship with soybean yield. This relationship can be explored with the Normalized Difference Vegetation Index (NDVI) derived from Landsat 8 and a fusion of Landsat 8 and the Moderate Resolution Imaging Spectroradiometer (MODIS) images. This study investigated the patterns of yield in two soybean fields infected with white mold between 2016 and 2017, and estimated yield loss caused by white mold. Results show evidence of clustering in the spatial distribution of yield (Moran’s I = 0.38; p < 0.05 in 2016 and Moran’s I = 0.45; p < 0.05 in 2017) that can be explained by the spatial distribution of white mold in the observed fields. Yield loss caused by white mold was estimated at 36% in 2016 and 56% in 2017 for the worse disease pixels, with the most accurate period for estimating this loss on 21 August and 8 September for 2016 field and 2017 field, respectively. This study shows the potential of free remotely sensed satellite data in estimating yield loss caused by white mold.