H,O, Sr,Nd, and Pb isotope geochemistry of the Latir volcanic field and cogenetic intrusions,New Mexico,and relations between evolution of a continental magmatic center and modifications of the lithosphere

Over 200 H, O, Sr, Nd, and Pb isotope analyses, in addition to geologic and petrologic constraints, document the magmatic evolution of the 28.5–19 Ma Latir volcanic field and associated intrusive rocks, which includes multiple stages of crustal assimilation, magma mixing, protracted crystallization, and open- and closed-system evolution in the upper crust. In contrast to data from younger volcanic centers in northern New Mexico, relatively low and restricted primary ¹⁸O values (+6.4 to +7.4) rule out assimilation of supracrustal rocks enriched in ¹⁸O. Initial ⁸⁷Sr/⁸⁶Sr ratios (0.705 to 0.708), ¹⁸O values (-2 to-7), and ²⁰⁶Pb/²⁰⁴Pb ratios (17.5 to 18.4) of metaluminous precaldera volcanic rocks and postcaldera plutonic rocks suggest that most Latir rocks were generated by fractional crystallization of substantial volumes of mantle-derived basaltic magma that had near-chondritic Nd isotope ratios, accompanied by assimilation of crustal material in two main stages: 1) assimilation of non-radiogenic lower crust, followed by 2) assimilation of middle and upper crust by inter-mediate-composition magmas that had been contaminated during the first stage. Magmatic evolution in the upper crust peaked with eruption of the peralkaline Amalia Tuff (26 Ma), which evolved from metaluminous parental magmas. A third stage of late, roofward assimilation of Proterozoic rocks in the Amalia Tuff magma is indicated by trends in initial ⁸⁷Sr/⁸⁶Sr and ²⁰⁶Pb/²⁰⁴Pb ratios from 0.7057 to 0.7098 and 19.5 to 18.8, respectively, toward the top of the pre-eruptive magma chamber. Highly evolved postcaldera plutons are generally fine grained and are zoned in initial ⁸⁷Sr/⁸⁶Sr and ²⁰⁶Pb/²⁰⁴Pb ratios, varying from 0.705 to 0.709 and 17.8 to 18.6, respectively. In contrast, the coarser-grained Cabresto Lake (25 Ma) and Rio Hondo (21 Ma) plutons have relatively homogeneous initial ⁸⁷Sr/⁸⁶Sr and ²⁰⁶Pb/²⁰⁴Pb ratios of approximately 0.7053 and 17.94 and 17.55, respectively. ¹⁸O values for all the postcaldera plutons overlap those of the precaldera rocks and Amalia Tuff, except for those for two late-stage rhyolite dikes associated with the Rio Hondo pluton that have ¹⁸O values of-8.6 and-9.5; these dikes are the only Latir rocks which may be largely crustal melts.Chemical and isotopic data from the Latir field suggest that large fluxes of mantle-derived basaltic magma are necessary for developing and sustaining large-volume volcanic centers. Development of a detailed model suggests that 6–15 km of new crust may have been added beneath the volcanic center; such an addition may result in significant changes in the chemical and Sr and Nd isotopic compositions of the crust, although Pb isotope ratios will remain relatively unchanged. If accompanied by assimilation, crystallization of pooled basaltic magma near the MOHO may produce substantial cumulates beneath the MOHO that generate large changes in the isotopic composition of the upper mantle. The Latir field may be similar to other large-volume, long-lived intracratonal volcanic fields that fundamentally owe their origins to extensive injection of basaltic magma into the lower parts of their magmatic systems. Such fields may overlie areas of significant crustal growth and hybridization.     

Molecular simulations of metal adsorption to bacterial surfaces

The atomic-scale interactions that occur between cations and the metal-binding cell wall components common to many gram-positive bacteria were investigated using molecular simulations techniques. We examined the adsorption of Cd and Pb onto peptidoglycan and teichoic acid components of the bacterial cell wall using classical energy force field methods. Within the framework of molecular mechanics and the Cerius² modeling software, we used energy minimization, conformational analysis, and molecular dynamics to examine the different components of the cell wall and to determine relative binding energies and structural configurations of the cell wall components, both with and without the metals present. Electronic structure calculations of representative metal-organic complexes validate the more practical classical methods required in simulating the large number of atoms associated with the cell wall components. The classical force field simulations were conducted in both gas phase and solvated periodic cells. Force field-based simulation techniques can adequately describe the interactions of Cd with the cell wall, defining both metal ion coordinations and binding distances. However, the classical force field approach is inconsistent in describing the observed Pb-cell wall interactions due to possible limitations in the force field parameters, the propensity for Pb to form hydroxides at circumneutral pH, or the dominance of other adsorption mechanisms.     

Diffusion-limited REE uptake by eclogite garnets and its consequences for Lu–Hf and Sm–Nd geochronology

Garnets from the Zermatt-Saas Fee eclogites contain narrow central peaks for Lu + Yb + Tm ± Er and at least one additional small peak towards the rim. The REE Sm + Eu + Gd + Tb ± Dy are depleted in the cores but show one prominent peak close to the rim. These patterns cannot be modeled using Rayleigh fractionation accompanied by mineral breakdown reactions. Instead, the patterns are well explained using a transient matrix diffusion model where REE uptake is limited by diffusion in the matrix surrounding the porphyroblast. Observed profiles are well matched if a roughly linear radius growth rate is used. The secondary peaks in the garnet profiles are interpreted to reflect thermally activated diffusion due to temperature increase during prograde metamorphism. The model predicts anomalously low ¹⁷⁶Lu/¹⁷⁷Hf and ¹⁴⁷Sm/¹⁴⁴Nd ratios in garnets where growth rates are fast compared to diffusion of the REE, and these results have important implications for Lu–Hf and Sm–Nd geochronology using garnet.     

Determining the trophic guilds of fishes and macroinvertebrates in a seagrass food web

We established trophic guilds of macroinvertebrate and fish taxa using correspondence analysis and a hierarchical clustering strategy for a seagrass food web in winter in the northeastern Gulf of Mexico. To create the diet matrix, we characterized the trophic linkages of macroinvertebrate and fish taxa present inHalodule wrightii seagrass habitat areas within the St. Marks National Wildlife Refuge (Florida) using binary data, combining dietary links obtained from relevant literature for macroinvertebrates with stomach analysis of common fishes collected during January and February of 1994. Heirarchical average-linkage cluster analysis of the 73 taxa of fishes and macroinvertebrates in the diet matrix yielded 14 clusters with diet similarity ≥ 0.60. We then used correspondence analysis with three factors to jointly plot the coordinates of the consumers (identified by cluster membership) and of the 33 food sources. Correspondence analysis served as a visualization tool for assigning each taxon to one of eight trophic guilds: herbivores, detritivores, suspension feeders, omnivores, molluscivores, meiobenthos consumers, macrobenthos consumers and piscivores. These trophic groups, corss-classified with major taxonomic groups, were further used to develop consumer compartments in a network analysis model of carbon flow in this seagrass ecosystem. The method presented here should greatly improve the development of future network models of food webs by providing an objective procedure for aggregating trophic groups.     

Avoiding pitfalls of least‐squares inversion by using the energy‐flux error criterion

Seismic inversion by modelling and data fitting depends on the criterion chosen to measure the misfit between observed and modelled data. The popular least‐squares error criterion has an important drawback: it is sensitive both to the shape of the recording surface and to velocity variations along this surface. Tests on synthetic seismic reflection data show that least‐squares inversion may work surprisingly poorly in situations where (i) the range of angles between reflected rays and the acquisition surface is large, (ii) the velocity varies significantly along this surface, or (iii) a compensation for the effects of dissipation is applied to the gradients. In these situations, the gradients may contain important artefacts and have incorrect amplitudes. The outgoing flux of energy of the residual wavefield across the acquisition surface provides an alternative measure of the data misfit which is independent of the recording surface, provided this surface is closed, and which is only sensitive to the aperture in the practical situation of an open surface or line of receivers. Energy‐flux inversion presents a strong resemblance to reverse‐time migration, but with the additional possibility of iteratively improving the images. In all the tests, energy‐flux inversion provided better images than least‐squares inversion.     

Pauperizing the pastoral periphery: the marginalization of herding communities in the world's dry lands

Environmental degradation and other socio-economic problems are too often discerned in contemporary pastoral systems in the wake of global economic change. This paper identifies cases where pastoral people respond to external pressures and opportunities in positive ways and adapt to changes. We hope that by doing this a framework of pastoral adaptations can be developed. The first part of this paper focuses on impacts of global economic change, which are mostly negative in nature. Through an extensive literature search in geography, anthropology, range management, and development field, the second part introduces cases that we categorize as positive adaptations.     

Exploration and discovery in Yellowstone Lake: results from high-resolution sonar imaging, seismic reflection profiling, and submersible studies

‘No portion of the American continent is perhaps so rich in wonders as the Yellow Stone’ (F.V. Hayden, September 2, 1874)Discoveries from multi-beam sonar mapping and seismic reflection surveys of the northern, central, and West Thumb basins of Yellowstone Lake provide new insight into the extent of post-collapse volcanism and active hydrothermal processes occurring in a large lake environment above a large magma chamber. Yellowstone Lake has an irregular bottom covered with dozens of features directly related to hydrothermal, tectonic, volcanic, and sedimentary processes. Detailed bathymetric, seismic reflection, and magnetic evidence reveals that rhyolitic lava flows underlie much of Yellowstone Lake and exert fundamental control on lake bathymetry and localization of hydrothermal activity. Many previously unknown features have been identified and include over 250 hydrothermal vents, several very large (>500 m diameter) hydrothermal explosion craters, many small hydrothermal vent craters (1–200 m diameter), domed lacustrine sediments related to hydrothermal activity, elongate fissures cutting post-glacial sediments, siliceous hydrothermal spire structures, sublacustrine landslide deposits, submerged former shorelines, and a recently active graben. Sampling and observations with a submersible remotely operated vehicle confirm and extend our understanding of the identified features. Faults, fissures, hydrothermally inflated domal structures, hydrothermal explosion craters, and sublacustrine landslides constitute potentially significant geologic hazards. Toxic elements derived from hydrothermal processes also may significantly affect the Yellowstone ecosystem.     

A rooftop tuned mass damper frame

This article documents the analytical study and feasibility of placing a tuned mass damper in the form of a limber rooftop moment frame atop relatively stiff structures to reduce seismic acceleration response. Six existing structures were analytically studied using a suite of time history and response spectra records. The analyses indicate that adding mass in conjunction with a limber frame results in an increase in the fundamental period of each structure. The fundamental period increase generally results in a decrease in seismic acceleration response for the same time history and response spectra records. Owing to the limber nature of the rooftop frames, non‐linear analysis methods were required to evaluate the stability of the rooftop tuned mass damper frame. The results indicate the addition of a rooftop tuned mass damper frame reduces the seismic acceleration response for most cases although acceleration response can increase if the rooftop frame is not tuned to accommodate the specific structure's dynamic behaviour and localized soil conditions. Appropriate design of the rooftop tuned mass damper frame can result in decreased seismic acceleration response. This translates to safer structures if used as a retrofit measure or a more economical design if used for new construction. Copyright © 2003 John Wiley & Sons, Ltd.     

Natural Gradient Tracer Test to Evaluate Natural Attenuation of MTBE Under Anaerobic Conditions

A natural gradient tracer test using perdeuterated MTBE was conducted in an anaerobic aquifer to determine the relative importance of dispersion and degradation in reducing MTBE concentrations in ground water. Preliminary ground water chemistry and hydraulic conductivity data were used to place the tracer within an existing dissolved MTBE plume at Port Hueneme, California. Following one year of transport, the tracer plume was characterized in detail.
Longitudinal dispersion was identified as the dominant mechanism for lowering the perdeuterated MTBE concentrations. The method of moments was used to determine the longitudinal and lateral dispersion coefficients (0.85 m²/day and 0.08 m²/day, respectively). A mass-balance analysis, carried out after one year of transport, accounted for 110% of the injected mass and indicated that no significant mass loss occurred. The plume structure created by zones of higher and lower hydraulic conductivity at the site was complex, consisting of several localized areas of high tracer concentration in a lower concentration plume. This is important because the aquifer has generally been characterized as exhibiting fairly minor heterogeneity. In addition, the tracer plume followed a curved flowpath that deviated from the more macroscopic direction of ground water flow inferred from local ground water elevation measurements and the behavior of the existing plume. Understanding the mass balance, plume structure, curvature of the tracer plume, and consequently natural attenuation behavior required the detailed sampling approach employed in this study. These data imply that a detailed understanding of site hydrogeology and an extensive sampling network may be critical for the correct interpretation of monitored natural attenuation of MTBE.