Investigation of Ionospheric Response to Geomagnetic Storms over a Low Latitude Station,Ile-Ife,Nigeria

Due to several complexities associated with the equatorial ionosphere, and the significant role which the total electron content (TEC) variability plays in GPS signal transmission, there is the need to monitor irregularities in TEC during storm events. The GPS SCINDA receiver data at Ile-Ife, Nigeria, was analysed with a view to characterizing the ionospheric response to geomagnetic storms on 9 March and 1 October 2012. Presently, positive storm effects, peaks in TEC which were associated with prompt penetration of electric fields and changes in neutral gas composition were observed for the storms. The maximum percentage deviation in TEC of about 120 and 45% were observed for 9 March and 1 October 2012, respectively. An obvious negative percentage TEC deviation subsequent to sudden storm commencement (SSC) was observed and besides a geomagnetic storm does not necessarily suggest a high scintillation intensity (S₄) index. The present results show that magnetic storm events at low latitude regions may have an adverse effect on navigation and communication systems.     

Central Paratethys paleoenvironment during the Badenian (Middle Miocene): evidence from foraminifera and stable isotope (δ<Superscript>13</Superscript>C and δ<Superscript>18</Superscript>O) study in the Vienna Basin (Slovakia)

Stable isotope data of the foraminiferal carbonate shells and bulk sediment samples from the Central Paratethys were investigated to contribute to better knowledge of the paleoenvironmental changes in Badenian (Middle Miocene). Five benthic (Uvigerina semiornata, U. aculeata, Ammonia beccarii, Elphidium sp. and Heterolepa dutemplei) and three planktonic taxa (Globigerina bulloides, G. diplostoma and Globigerinoides trilobus), characterising the bottom, intermediate and superficial layers of the water column, were selected from the Vienna Basin (W Slovakia). The foraminiferal fauna and its isotope signal point out to temperature-stratified, nutrient-rich and consequently less-oxygenated marine water during the Middle/Late Badenian. Negative carbon isotope ratios indicate increased input of ¹²C-enriched organic matter to the bottom of the Vienna Basin. Positive benthic δ¹⁸O implies that the global cooling tendency recorded in the Middle Miocene has also affected the intramountain Vienna Basin. In this time, the Central Paratethys has been in the process of isolation. Our stable isotope trend suggests that the communication with Mediterranean Sea has been still more or less active on the south of Vienna Basin (Slovak part) in the Late Badenian, whereas the seawater exchange towards north was apparently reduced already during the Middle Badenian.     

Deriving Optimal Exploration Target Zones on Mineral Prospectivity Maps

This paper describes a quantitative methodology for deriving optimal exploration target zones based on a probabilistic mineral prospectivity map. The methodology is demonstrated in the Rodalquilar mineral district in Spain. A subset of known occurrences of mineral deposits of the type sought was considered discovered and then used as training data, and a map of distances to faults/fractures and three band ratio images of hyperspectral data were used as layers of spatial evidence in weights-of-evidence (WofE) modeling of mineral prospectivity in the study area. A derived posterior probability map of mineral deposit occurrence showing non-violation of the conditional independence assumption and having the highest prediction rate was then put into an objective function in simulated annealing in order to derive a set of optimal exploration focal points. Each optimal exploration focal point represents a pixel or location within a circular neighborhood of pixels with high posterior probability of mineral deposit occurrence. Buffering of each optimal exploration focal point, based on proximity analysis, resulted in optimal exploration target zones. Many of these target zones coincided spatially with at least one occurrence of mineral deposit of the type sought in the subset of cross-validation (i.e., presumed undiscovered) mineral deposits of the type sought. The results of the study showed the usefulness of the proposed methodology for objective delineation of optimal exploration target zones based on a probabilistic mineral prospectivity map.     

An approach for estimating sustainable yield of karst water in data sparse regions

This study presents an approach for transferring the qualitative analysis of groundwater sustainability for development to quantitative evaluation by an analogy of two similar regions. A concept of groundwater exploitation sustainability (GES), which is an evaluation index based on water supply capability, eco-geo-environment maintaining capability and the harmony between water and society, is put forward. The fuzzy analytic hierarchy process method is applied to calculate the GES for the Xiangshan and Dianchang karst groundwater sources in the Huaibei city, Anhui Province, China. The GES of the Xiangshan karst system was calculated to be 0.53 and represents medium exploitation sustainability, while that for the Dianchang is relatively high with a value of 0.70. These two karst systems are separate units but have similar hydrogeological conditions. The Dianchang area had limited groundwater observation data, while the Xiangshan area had long series of observation data, which enabled the computation of the sustainable yield. The sustainable yield of the Xiangshan karst area was used to calibrate the GES, and develop a linear equation between the GES and sustainable yield, which was used to calculate the sustainable yield of the Diangchang karst area as 40.4 million m³.     

Experimental growth of åkermanite reaction rims between wollastonite and monticellite: evidence for volume diffusion control

Growth rates of monomineralic, polycrystalline åkermanite (Ca₂MgSi₂O₇) rims produced by solid-state reactions between monticellite (CaMgSiO₄) and wollastonite (CaSiO₃) single crystals were determined at 0.5 GPa dry argon pressure, 1,000–1,200°C and 5 min to 60 h, using an internally heated pressure vessel. Inert Pt-markers, initially placed at the monticellite–wollastonite interface, indicate symmetrical growth into both directions. This and mass balance considerations demonstrate that rim growth is controlled by transport of MgO. At 1,200°C and run durations between 5 min and 60 h, rim growth follows a parabolic rate law with rim widths ranging from 0.4 to 16.3 μm indicating diffusion-controlled rim growth. The effective bulk diffusion coefficient \( D_{\text{eff,MgO}}^{\text{Ak}} \) is calculated to 10^?15.8±0.1 m² s^?1. Between 1,000°C and 1,200°C, the effective bulk diffusion coefficient follows an Arrhenius law with E _a = 204 ± 18 kJ/mol and D ₀ = 10^?8.6±1.6 m² s^?1. Åkermanite grains display a palisade texture with elongation perpendicular to the reaction interface. At 1,200°C, average grain widths measured normal to elongation, increase with the square root of time and range from 0.4 to 5.4 μm leading to a successive decrease in the grain boundary area fraction, which, however, does not affect \( D_{\text{eff,MgO}}^{\text{Ak}} \) to a detectible extent. This implies that grain boundary diffusion only accounts for a minor fraction of the overall chemical mass transfer, and rim growth is essentially controlled by volume diffusion. This is corroborated by the agreement between our estimates of the effective MgO bulk diffusion coefficient and experimentally determined volume diffusion data for Mg and O in åkermanite from the literature. There is sharp contrast to the MgO–SiO₂ binary system, where grain boundary diffusion controls rim growth.     

Numerical simulation of percussive drilling

This paper presents a novel dynamical model to analyze the long‐term response of a percussive drilling system. This departs from existing approaches that usually consider a single activation and bit/rock interaction cycle for the analysis of the process performance. The proposed model integrates the axial dynamics of an elastic piston and an elastic drill bit, a motion‐dependent pressure law to drive the piston, and a generalized bit/rock interaction law representative of the dynamic indentation taking place at the bit/rock interface. It applies to down‐the‐hole percussive drilling as well as top‐hole, with minor modifications. The model does not account for the angular motion or the hole cleaning, however. The model is first formulated mathematically; then, a finite‐dimensional approximation is proposed for computations. Numerical analyses of the model response, for a low‐size down‐the‐hole percussive system, follow. The period‐1 stationary response for the reference configuration is studied in detail, and parametric analyses assessing the influence on the rate of penetration of the bit/rock interaction parameters, the feed force, and the percussive activation parameters are conducted. These analyses reveal that the multiscale nature of the process is well captured by the model and recover expected trends for the influence of the parameters. They also suggest that a significant increase of the penetration rate can be achieved by increasing the percussive frequency. Copyright © 2015 John Wiley & Sons, Ltd.     

The meteorological framework and the cultural memory of three severe winter-storms in early eighteenth-century Europe

Three violent eighteenth-century storms that ravaged the North Sea area (1703), western central Europe (1739) and Portugal (1739) are investigated from the point of view of their meteorological setting, their socio-economic impact, and whether and by what means they secured an enduring place in the cultural memory. The evidence draws on individual narrative sources such as chronicles and poems, and institutional sources such as ship’s logbooks and state-organised ‘windthrow’ inventories of tree loss. Each of the three storms had socio-economic impacts that could be described as ‘war-like’ in the damage caused to buildings and the destruction of forests. The “Great Storm” of December 1703 jeopardized English naval supremacy in the War of the Spanish Succession by sinking a number of Royal Navy ships and taking the life of more than 8000 seamen. In January 1739 two similarly destructive storms swept over mainland Europe. The cultural memory of the three events here considered was however strikingly different. The sequence of storms in January 1739 though being the most protracted of the last centuries, and well-chroniceled, did not persist in the collective memories of those in France, Switzerland and elsewhere who experienced them. Likewise, the “Great Storm” was quickly forgotten on the continent, whereas its memory remained deeply rooted in England through the writings of Defoe (1704). In Portugal the 1739 storm won a lasting place in the country’s cultural memory owing to two poems that it inspired. Furthermore, it was recorded in the Kingdom’s official newspaper, in the astronomical prognoses and in written records of the Old Regime’s cultural elite.     

Earthquake detection probability within a seismically quiet area: application to the Bruchsal geothermal field

In applications such as oil and gas production, deep geothermal energy production, underground storage, and mining, it is common practice to implement local seismic networks to monitor and to mitigate induced seismicity. For this purpose, it is crucial to determine the capability of the network to detect a seismic event of predefined magnitude in the target area. The determination of the magnitude of completeness of a network is particularly required to properly interpret seismic monitoring results. We propose a method to compute the detection probability for existing local seismic networks, which (i) strictly follows the applied detection sequence; (ii) estimates the detection capability where seismicity has not yet occurred; and (iii) delivers the results in terms of probabilities. The procedure includes a calibration of a local magnitude scale using regional earthquakes recorded by the network and located outside the monitored area. It involves pre‐processing of the seismograms recorded at each station as performed during the triggering sequence, which is assumed based on amplitude thresholds. Then, the calibrated magnitude–distance–amplitude relations are extrapolated at short distances and combined to reproduce the network detection sequence. This generates a probability to detect a seismic event of a given magnitude at a specified location. This observation‐based approach is an alternative to a fully theoretical detection capability modelling and includes field conditions. Seismic wave attenuation by geometrical spreading and intrinsic attenuation, site effect, and instrumental responses are partly accounted for by the calibration. We apply this procedure on the seismic network deployed in the Bruchsal geothermal field (Germany). Although the system was in good working order, no induced seismicity was identified in the area between June 2010, when monitoring started, and November 2012. The recording of distant seismicity during this time period, however, allowed the application of the proposed procedure. According to the applied network detection parameters, the results indicate that the absence of seismicity can be interpreted as a 95% probability that no seismic event with M_L ≥ 0.7 occurred below the network at 2.4‐km depth, i.e., in the geothermal reservoir.     

Water‐bottom multiple attenuation by Kirchhoff extrapolation

Despite being less general than 3D surface‐related multiple elimination (3D‐SRME), multiple prediction based on wavefield extrapolation can still be of interest, because it is less CPU and I/O demanding than 3D‐SRME and moreover it does not require any prior data regularization. Here we propose a fast implementation of water‐bottom multiple prediction that uses the Kirchhoff formulation of wavefield extrapolation. With wavefield extrapolation multiple prediction is usually obtained through the cascade of two extrapolation steps. Actually by applying the Fermat’s principle (i.e., minimum reflection traveltime) we show that the cascade of two operators can be replaced by a single approximated extrapolation step. The approximation holds as long as the water bottom is not too complex. Indeed the proposed approach has proved to work well on synthetic and field data when the water bottom is such that wavefront triplications are negligible, as happens in many practical situations.     

An investigation of the SO2 content of the venusian mesosphere using SPICAV-UV in nadir mode

Using the SPICAV-UV spectrometer aboard Venus Express in nadir mode, we were able to derive spectral radiance factors in the middle atmosphere of Venus in the 170-320 nm range at a spectral resolution of R ? 200 during 2006 and 2007 in the northern hemisphere. By comparison with a radiative transfer model of the upper atmosphere of Venus, we could derive column abundance above the visible cloud top for SO₂ using its spectral absorption bands near 280 and 220 nm. SO₂ column densities show large temporal and spatial variations on a horizontal scale of a few hundred kilometers. Typical SO₂ column densities at low latitudes (up to 50°N) were found between 5 and 50 μm-atm, whereas in the northern polar region SO₂ content was usually below 5 μm-atm. The observed latitudinal variations follow closely the cloud top altitude derived by SPICAV-IR and are thought to be of dynamical origin. Also, a sudden increase of SO₂ column density in the whole northern hemisphere has been observed in early 2007, possibly related to a convective episode advecting some deep SO₂ into the upper atmosphere.