Weights of Evidence Modeling of Mineral Potential: A Case Study Using Small Number of Prospects,Abra, Philippines

Weights of evidence (WofE) modeling usually is applied to map mineral potential in areas with large number of deposits/prospects. In this paper, WofE modeling is applied to a case study area measuring about 920 km² with 12 known porphyry copper prospects. A pixel size of 100 m × 100 m was used in the spatial data analyses to represent in a raster-based GIS lateral extents of prospects and of geological features considered as spatial evidence. Predictor maps were created based on (a) estimates of studentized values of positive spatial association between prospects and spatial evidence; (b) proportion of number of prospects in zones where spatial evidence is present; and (c) geological interpretations of positive spatial association between prospects and spatial evidence. Uncertainty because of missing geochemical evidence is shown to have an influence on tests of assumption of conditional independence (CI) among predictor maps with respect to prospects. For the final predictive model, assumption of CI is rejected based on omnibus test but is accepted based on a new omnibus test. The final predictive model, which delineates 30% of study area as zones with potential for porphyry copper, has 83% success rate and 73% prediction rate. The results demonstrate plausibility of WofE modeling of mineral potential in large areas with small number of mineral prospects.     

Rainfall thresholds for landsliding in the Himalayas of Nepal

Landsliding of the hillslope regolith is an important source of sediment to the fluvial network in the unglaciated portions of the Himalayas of Nepal. These landslides can produce abrupt increases of up to three orders of magnitude in the fluvial sediment load in less than a day. An analysis of 3 years of daily sediment load and daily rainfall data defines a relationship between monsoonal rainfall and the triggering of landslides in the Annapurna region of Nepal. Two distinct rainfall thresholds, a seasonal accumulation and a daily total, must be overcome before landslides are initiated. To explore the geomorphological controls on these thresholds, we develop a slope stability model, driven by daily rainfall data, which accounts for changes in regolith moisture. The pattern of rainfall thresholds predicted by the model is similar to the field data, including the decrease in the daily rainfall threshold as the seasonal rainfall accumulation increases. Results from the model suggest that, for a given hillslope, regolith thickness determines the seasonal rainfall necessary for failure, whereas slope angle controls the daily rainfall required for failure.     

Formation of the Dongmozhazhua Pb–Zn Deposit in the Thrust‐Fold Setting of the Tibetan Plateau,China: Evidence from Fluid Inclusion and Stable Isotope Data

The Dongmozhazhua deposit, the largest Pb–Zn deposit in south Qinghai, China, is stratabound, carbonate‐hosted and associated with epigenetic dolomitization and silicification of Lower–Middle Permian—Upper Triassic limestones in the hanging walls of a Cenozoic thrust fault system. The mineralization is localized in a Cenozoic thrust‐folded belt along the northeastern edge of the Tibetan plateau, which was formed due to the India–Asia plate collision during the early Tertiary. The deposit comprises 16 orebodies with variable thicknesses (1.5–26.3 m) and lengths (160–1820 m). The ores occur as dissemination, vein, and breccia cement. The main sulfide assemblage is sphalerite + galena + pyrite + marcasite ± chalcopyrite ± tetrahedrite, and gangue minerals consist mainly of calcite, dolomite, barite, and quartz. Samples of pre‐ to post‐ore stages calcite yielded δ¹³C and δ¹⁸O values that are, respectively, similar to and lower than those yielded by the host limestones, suggesting that the calcite formed from fluids derived from carbonate dissolution. Fluid inclusions in calcite and sphalerite in the polymetallic sulfidization stage mostly comprise liquid and gas phases at room temperature, with moderate homogenization temperatures (100–140°C) and high salinities (21–28 wt% NaCl eq.). Micro‐thermometric fluid inclusion data point to polysaline brines as ore‐forming fluids. The δD and δ¹⁸O values of ore fluids, cation compositions of fluid inclusions, and geological information suggest two main possible fluid sources, namely basinal brines and evaporated seawater. The fluid inclusion data and regional geology suggest that basinal brines derived from Tertiary basins located southeast of the Dongmozhazhua deposit migrated along deep detachment zones of the regional thrust system, leached substantial base metals from country rocks, and finally ascended along thrust faults at Dongmozhazhua. There, the base‐metal‐rich basinal brines mixed with bacterially‐reduced H₂S‐bearing fluids derived from evaporated seawater preserved in the Permo–Triassic carbonate strata. The mixing of the two fluids resulted in Pb–Zn mineralization. The Dongmozhazhua Pb–Zn deposit has many characteristics that are similar to MVT Pb–Zn deposits worldwide.     

Archaean high-K granitoids produced by remelting of earlier Tonalite–Trondhjemite–Granodiorite (TTG) in the Sangmelima region of the Ntem complex of the Congo craton,southern Cameroon

We present a geochemical and isotopic study that, consistent with observed field relations, suggest Sangmelima late Archaean high-K granite was derived by partial melting of older Archaean TTG. The TTG formations are sodic-trondhjemitic, showing calcic and calc-alkalic trends and are metaluminous to peraluminous. High-K granites in contrast show a potassic calc-alkaline affinity that spans the calcic, calc-alkalic, alkali-calcic and alkalic compositions. The two rock groups (TTG and high-K granites) on the other hand are both ferroan and magnesian. They have a similar degree of fractionation for LREE but a different one for HREE. Nd model ages and Sr/Y ratios define Mesoarchaean and slab-mantle derived magma compositions respectively, with Nb and Ti anomalies indicating a subduction setting for the TTG. Major and trace element in addition to Sr and Nd isotopic compositions support field observations that indicate the derivation of the high-K granitic group from the partial melting of the older TTG equivalent at depth. Geochemical characteristics of the high-K granitic group are therefore inherited features from the TTG protolith and cannot be used for determining their tectonic setting. The heat budget required for TTG partial melting is ascribed to the upwelling of the mantle marked by a doleritic event of identical age as the generated high-K granite melts. The cause of this upwelling is related to linear delamination along mega-shear zones in an intracontinental setting.     

Investigating the Halogen Chemistry From High-Latitude Nighttime Stratospheric Measurements of OClO and NO2

Two cases of simultaneous nighttime measurements of NO₂ and OClO in the winter polar stratosphere are analyzed in order to test our present knowledge of halogen chemistry in the presence of high amount of NO₂ at low temperature. Comparisons with Lagrangian model calculations using several hypotheses are performed. First simulations, using the admitted constant rates of chemical reaction, strongly underestimate the measured OClO while the NO₂ profiles are correctly reproduced. If uncertainties in actinic fluxes calculations are taken into account, simulation results do not show a significant reduction of the underestimation. A better agreement can be achieved if the formation of unstable isomers of ClONO₂ and of BrONO₂ occurs in the cold conditions of the polar stratosphere. An approximate value of the branching ratios of the channels leading to ClONO₂ and ClOONO, and to BrONO₂ and BrOONO, necessary to reproduce both OClO and NO₂ is given and discussed.     

Behaviour of REE and mass balance calculations in a lateritic profile over chlorite schists in South Cameroon

An in situ weathering profile overlying chlorite schists in the Mbalmayo-Bengbis formations (South Cameroon) was chosen for the study of the behaviour of REE and the evaluation of geochemical mass balance. After physical and mineralogical studies, the chlorite schists and the undisturbed weathered materials were chemically analyzed for major elements (X-ray fluorescence and titrimetry) and REE (ICP-MS). The behaviour of the REE in the Mbalmayo weathering system was established in comparison with the REE of the reference parent rock. Mass balance calculations were applied to both major elements and REE. The mineralogy of the materials was determined with the aid of a Philips 1720, diffractometer. The chlorite schists of the Mbalmayo sector show low REE contents (Σ=153.44 ppm). These rocks are relatively rich in LREE (about 125 times the chondritic value) and relatively poor in HREE (about 20 times the chondritic value). The REE diagram normalized to chondrites shows a slightly split graph ((La/Yb)_N=6.18) with marked enrichment in LREE (LREE/HREE=9.50) in relation to HREE. Moreover, these spectra do not present any Ce anomaly, but a slightly positive Eu anomaly. The imperfectly evolved profile, whose materials are genetically linked, shows an atypical behaviour of REE. In effect, the LREE are more mobile than the HREE during weathering ((La/Yb)NASC<1) with weak Ce anomalies. This has been rarely reported in lateritic profiles characterized by higher HREE mobility than LREE during weathering processes with high Ce anomalies. This is either due to the difference in the stability of REE-bearing minerals, or to the weak acidic to basic pH conditions (6.70<pH<7.80), or even due to the average evolution of the weathering materials. The pathway of the REE along the profile is as follows: (1) leaching in the saprolites and summit of the profile, except for Ce, which precipitates very weakly in the nodular materials and the coarse saprolite materials, (2) at the base of the profile, solutions come in contact with chlorite schist formations, at this level, the pH increases (pH=7.79), HREE and a part of LREE partially void of Ce precipitate and (3) the other part of LREE precipitates further up in the profile. The geochemical mass balance calculations reveal that these elements are leached in the same phases as the relatively high Si, Al, K and Fe²⁺ contents.     

Lake Neor reveals how mountain vegetation responded to 7000 years of hydroclimate variability in northwestern Iran

Palynological and geochemical analyses provide valuable information about modern and past climatic regimes and vegetation. The impact of climate and humans on past vegetation in the semi-arid areas of northwestern Iran has received increased interest in the wake of warming temperatures in the Middle East. Palynological and down-core XRF elemental abundances from a peat core from Lake Neor enabled a reconstruction of vegetational changes of the past 7000 years over the highlands of northwestern Iran. Periods of increased arboreal pollen (AP) types and high (Artemisia + Poaceae)/Chenopodiaceae ratios along with low titanium abundances, high percentages of total organic carbon, more negative δD values, and higher carbon accumulation rates suggest a relatively wet climate. These conditions have persisted during the periods 6700–6200, 5200–4450 and 3200–2200 cal a bp. The overall low AP values, substantial rise of Chenopodiaceae, high Ti abundances and low values of palaeo-redox proxies, are all evidences of a drier climate, as has been reconstructed for the periods 6200–5200 and 4030–3150 cal a bp and the last 2200 years. An important feature of the last centuries is the increase of anthropogenic and pastoral indicator pollen types. Our results may provide basic data to predict future trends in vegetation dynamics under future climate change in western Asia.     

Numerical simulation of percussive drilling

This paper presents a novel dynamical model to analyze the long‐term response of a percussive drilling system. This departs from existing approaches that usually consider a single activation and bit/rock interaction cycle for the analysis of the process performance. The proposed model integrates the axial dynamics of an elastic piston and an elastic drill bit, a motion‐dependent pressure law to drive the piston, and a generalized bit/rock interaction law representative of the dynamic indentation taking place at the bit/rock interface. It applies to down‐the‐hole percussive drilling as well as top‐hole, with minor modifications. The model does not account for the angular motion or the hole cleaning, however. The model is first formulated mathematically; then, a finite‐dimensional approximation is proposed for computations. Numerical analyses of the model response, for a low‐size down‐the‐hole percussive system, follow. The period‐1 stationary response for the reference configuration is studied in detail, and parametric analyses assessing the influence on the rate of penetration of the bit/rock interaction parameters, the feed force, and the percussive activation parameters are conducted. These analyses reveal that the multiscale nature of the process is well captured by the model and recover expected trends for the influence of the parameters. They also suggest that a significant increase of the penetration rate can be achieved by increasing the percussive frequency. Copyright © 2015 John Wiley & Sons, Ltd.     

Groundwater potential assessment in a sedimentary terrain,southwestern Nigeria

Geoelectrical resistivity techniques are increasingly being applied in addressing a wide range of hydrological, environmental, and geotechnical problems. This is due to their effectiveness in near-surface characterization. In the present study, a suite of vertical electrical soundings (VESs) was integrated with 2D geoelectrical resistivity and time-domain induced polarization (IP) imaging to characterize the near-surface and delineate the underlying aquifer in a sedimentary terrain. The geophysical survey was conducted as part of preliminary studies to evaluate the potential of groundwater resource in Iyana-Iyesi and Canaan Land area of Ota, southwestern Nigeria. A high-yield confined sandy aquifer overlain by a low-yield aquitard was delineated; overlying the aquitard is a very resistive and thick layer that is predominantly composed of kaolinitic swelling clay intercalated with phosphate mineral.