GIS application for regional assessment of seismically induced slope failures in the Sierra Nevada Range,South Spain,along the Padul Fault

Complete rupture of the Padul Fault represents one of the largest plausible earthquakes in the Sierra Nevada Range, one of the most seismically active regions of Spain. We performed a regional assessment of earthquake-triggered slope instabilities in the western part of the range to determine the most likely types of failures from such an earthquake in the region and suggest where such failures have a higher likelihood of occurring. These results are broadly useful for management of regional life-lines and future development. First, a slope-instability inventory of the Sierra Nevada was produced to identify the most common instability types. Subsequently, the Newmark’s sliding rigid-block methodology, implemented in a geographic information system, was used to obtain the distribution of Newmark displacements in the area considering a M _w 6.6 earthquake on the Padul Fault. The Newmark displacements were then compared to the distribution of the inventoried slope instabilities to identify the areas where seismicity could reactivate old slope instabilities or generate new ones, and to identify the involved landslide typology. The most likely seismically induced slope instabilities in the Sierra Nevada are rock falls and rock slides. These types of instabilities could be triggered by Newmark displacements of 2 cm or less.     

A software solution for point counting. Petrographic thin section analysis as a case study

In the field of geology, as in many other fields, a common problem is the analysis of 2D sections. An example of this is the petrographic study of rock samples, i.e., the quantification of its mineral components and the percentages of each phase present in it. Conventionally, this quantification has been determined by point counting performed on thin sections. Although point counting is very time consuming, it is of common use in several domains including geology, biology, medicine, and materials sciences, among others. Point counting in thin sections is normally conducted through mechanical or electromechanical devices attached to a microscope; such devices are very expensive, offer limited functionality, and are very time consuming. In this contribution, we introduce an interactive visualization application called Rock.AR that reduces the amount of time required to apply this technique and simplify its work flow. It provides visual tools like distortion techniques, overview + detail, and statistics to assist the technique. A comparison between this application and similar tools through users' experiences is provided. We compare the time it takes to complete a session of point counting and the tools' usability.     

Magnetic properties related to hydrothermal alteration processes at the Escondida porphyry copper deposit,northern Chile

Fluid–rock interaction related to the circulation of hydrothermal fluids can strongly modify the physicochemical properties of wall rocks in porphyry Cu deposits. These processes can also produce compositional and textural changes in ferromagnetic minerals, which can be quantified using magnetic methods. In the Escondida porphyry Cu deposit of northern Chile, each hydrothermally altered lithology is characterized by a discrete assemblage of Fe–Ti oxide minerals. These minerals have distinctive bulk magnetic susceptibility (K _bulk), temperature-dependent magnetic susceptibility, and magnetic hysteresis parameters. Selectively altered rocks (i.e., potassic and chloritic alteration types) exhibit the highest K _bulk values (>3.93?×?10^?3 SI units), and their hysteresis parameters indicate multidomain magnetic mineral behavior. This suggests that these rocks are composed of the coarsest magnetic grain sizes within the deposit. Optical analyses and susceptibility–temperature curves confirm that the magnetic signals in selectively altered rocks are mainly carried by secondary magnetite. In contrast, pervasively altered rocks (i.e., quartz-sericite and argillic alteration types) exhibit low K _bulk values (<1.93?×?10^?4 SI units) and contain smaller pseudo-single domain magnetic grain assemblages. This is consistent with the destruction and/or reduction in size of magnetite under acidic conditions. The results therefore demonstrate a genetic relationship between the hydrothermal alteration processes, Fe–Ti oxide minerals, and magnetic properties of the wall rock in the Escondida deposit. These magnetic methods can be considered a sensitive and efficient petrophysical tool for the identification and semi-quantification of alteration assemblages, and facilitating the recognition and mapping of discrete hydrothermal zones during exploration and operation of porphyry Cu deposits.     

Significance of ancient sulfide PGE and Re–Os signatures in the mantle beneath Calatrava,Central Spain

Spinel lherzolite and wehrlite xenoliths from the Cenozoic Calatrava volcanic field carry the geochemical imprint of metasomatic agents that have affected the subcontinental lithospheric mantle beneath Central Iberia. Some xenoliths (mainly wehrlites) were enriched in REE, Sr, P, and CO₂ by silicic-carbonate-rich metasomatic melts/fluids, while others record the effects of subduction-related hydrous silicate fluids that have precipitated amphibole and induced high Ti/Eu in primary clinopyroxene. The petrographic observations and geochemical data suggest that interstitial glass in the xenoliths represent the quenched products of Si-rich melts that infiltrated the mantle peridotite shortly before the entrainment of the xenoliths in the host magmas that erupted ca 2 million years ago. During their infiltration, the metasomatic melts reacted with peridotite, resulting in silica enrichment, while remobilizing grains of iron-rich monosulfide solid solution (Fe-rich Mss) initially enclosed in, or intergranular to, primary olivine and pyroxenes. In situ laser ablation inductively coupled plasma-mass spectrometry analysis of single sulfide grains reveals that the Fe-rich Mss in glass shows platinum-group element (PGE) patterns and ¹⁸⁷Os/¹⁸⁸Os compositions identical to the Fe-rich Mss occurring as inclusions in, or at grain boundaries of primary silicates. Moreover, independent of its microstructural position, Fe-rich Mss exhibits PGE and ¹⁸⁷Os/¹⁸⁸Os signatures typical of Mss either residual after partial melting or crystallized directly from sulfide melts. Our findings reveal that young metasomatic melt(s)/fluid(s) may carry remobilized sulfides with PGE and Os-isotopic signatures identical to those of texturally older sulfides in the peridotite xenolith. These sulfides thus still provide useful information about the timing and nature of older magmatic events in the subcontinental mantle.     

Dissolution–precipitation processes governing the carbonation and silicification of the serpentinite sole of the New Caledonia ophiolite

The weathering of mantle peridotite tectonically exposed to the atmosphere leads commonly to natural carbonation processes. Extensive cryptocrystalline magnesite veins and stock-work are widespread in the serpentinite sole of the New Caledonia ophiolite. Silica is systematically associated with magnesite. It is commonly admitted that Mg and Si are released during the laterization of overlying peridotites. Thus, the occurrence of these veins is generally attributed to a per descensum mechanism that involves the infiltration of meteoric waters enriched in dissolved atmospheric CO₂. In this study, we investigate serpentinite carbonation processes, and related silicification, based on a detailed petrographic and crystal chemical study of serpentinites. The relationships between serpentine and alteration products are described using an original method for the analysis of micro-X-ray fluorescence images performed at the centimeter scale. Our investigations highlight a carbonation mechanism, together with precipitation of amorphous silica and sepiolite, based on a dissolution–precipitation process. In contrast with the per descensum Mg/Si-enrichment model that is mainly concentrated in rock fractures, dissolution–precipitation process is much more pervasive. Thus, although the texture of rocks remains relatively preserved, this process extends more widely into the rock and may represent a major part of total carbonation of the ophiolite.     

The development of the pinnacles (Lena pillars) along Middle Lena (Sakha Republic,Siberia, Russia)

The study deals with the Lena Pillars (Sakha Republic, Russia, Siberia). The Lena Pillars are pinnacle features which are characteristic on karsts. The importance of these features is that they are extremely large and occur on very large areas. Their occurrence is interesting because they do not appear on tundra karst. We investigated the veneers of cliffs, the fracture density of the building rock, the distribution and dispersion of the fracture directions, direction distribution and dispersion of the giant grikes between the pillars, the layer thickness of the building rock, the size and dispersion of debris. We distinguished pillar types, and then we classified the features on the area of the pillars from a morphogenetical point of view. According to investigations and morphological analyses, the pillars developed from palaeokarsts. During the former karstification grikes and caverns developed close to the surface. These features coalesced into each other. The giant grikes of great size became filled and the pillars were covered. After the cut of the Lena River these features were revealed and became exhumed. Now the pillars are destroyed and continue developing by frost weathering.     

Coastal vulnerability to wave storms of Sele littoral plain (southern Italy)

This paper presents a new method for coastal vulnerability assessment (CVA), which relies upon three indicators: run-up distance (as a measurement of coastal inundation), beach retreat (as a measurement of potential erosion), and beach erosion rate (obtained through the shoreline positions in different periods). The coastal vulnerability analysis of Sele Coastal Plain to storm impacts is examined along a number of beach profiles realized between 2008 and 2009. This particular study area has been selected due to its low-lying topography and high erosion propensity. Results are given in terms of an impact index, performed by combining the response due to coastal inundation, storm erosion, and beach erosion rate. This analysis is implemented on the basis of morphosedimentary characteristics of the beach, wave climate evaluation, and examination of multitemporal aerial photographs and topographic maps. The analysis of the final results evidences different coastal responses as a function of the beach width and slope, which in turn depend on the local anthropization level. The comparison of this method with a Coastal Vulnerability Index method evidences the better attitude of CVA index to take into account the different beach features to explain the experienced damages in specific stretches of the coastline considered.     

Semantically Enriching an Open Source Sensor Observation Service Implementation for Accessing Heterogeneous Environmental Data Sources

Many kinds of environmental data are nowadays publicly available, but spread over the web. This article discusses using the Sensor Observation Service (SOS) standard of the Open Geospatial Consortium (OGC) as a common interface for providing data from heterogeneous sources which can be integrated to a user tailored environmental information system. In order to allow for providing user‐tailored and problem‐specific information the adjusted SOS is augmented by a semantic layer which maps the environmental information to ontology concepts. The necessary information fusion from different domains and data types lead to several specific requirements for the SOS. Addressing these requirements we have implemented a SOS which still conforms to the OGC SOS 1.0.0 standard specification. The developed SOS has been integrated in a publicly available demonstrator of our personalized environmental information system. Additionally this article discusses future consequences for the SOS, caused by the recently published SOS 2.0 specification.     

Non-linear stability of the equilibria in the gravity field of a finite straight segment

We study the non-linear stability of the equilibria corresponding to the motion of a particle orbiting around a finite straight segment. The potential is a logarithmic function and may be considered as an approximation to the one generated by elongated celestial bodies. By means of the Arnold's theorem for non-definite quadratic forms we determine the orbital stability of the equilibria, for all values of the parameter k of the problem, resonant cases included.