Post-fire management effects on sediment (dis)connectivity in Mediterranean forest ecosystems: Channel and catchment response

Forest fires and post-fire practices influence sediment connectivity (SC). In this study, we use the ‘aggregated index of connectivity’ (AIC) to assess SC in five Mediterranean catchments (198–1090 ha) affected by a wildfire in 2012 in south-eastern Spain. Two temporal scenarios were considered, immediately after the fire and before post-fire management, and 2 years after the fire including all practices (hillslope barriers, check-dams, afforestation, salvage logging and skid trails). One LiDAR (light detection and ranging)-derived digital elevation model (DEM, 2 m × 2 m resolution) was generated, per scenario. The five catchment outlets were established as the computation target (AIC_OUT), and structural and functional SC were calculated. Index outputs were normalized to make the results of the non-nested catchments comparable (AIC_N-OUT). The output analysis includes the SC distribution along the catchments and at local scale (929 sub-catchments, 677 in the burned area), the hillslope and channel measures' effect on SC, and a sedimentological analysis using observed area-specific sediment yield (SSY) at 10 new (built after post-fire practices) concrete check-dams located in the catchments (SSY = 1.94 Mg ha⁻¹ yr⁻¹; σ = 1.22). The catchments with more circular shapes and steeper slopes were those with higher AIC_N-OUT. The structural SC maps – removing the rainfall erosivity influence – allowed evaluating the actual role played by the post-fire practices that reduced SC ( $\overline{x}$= − 1.19%; σ = 0.41); while functional SC was linked to the actual change of SC ( $\overline{x}$= + 5.32%; σ = 0.62). Hillslope treatments resulted in significant changes on AIC_N-OUT at sub-catchment scale with certain disconnectivity. A good and positive correlation was found between the SSY and the changes of AIC_N-OUT. However, the coarse DEM resolution explained the lack of effect of the rock check-dams – located on the secondary channels – on AIC_N-OUT. AIC_N-OUT proved to be a useful tool for decision making in post-fire restoration, but an optimal input data is still necessary to refine calculations.     

The Updated fe Ionization Equilibrium for the Electron K-Distributions

In the past few years new calculations of the ionization and recombination rates have been published. The new Fe ionization equilibrium for these new rates is available for a Maxwellian distribution. Therefore the updated Fe ionization equilibrium for the non-thermal -distribution with an enhanced number of particles in the high-energy tail is presented. Results for the various deviations from a Maxwellian distribution are given in tabular form and these are compared with previous ones. A method for the determination of an energy distribution different from the Maxwellian one is suggested.     

Subject Index volume 103

Subject Index

Subject Index volume 103     

Discovery of the Paleo-Tethys residual peridotites along the Anyemaqen–KunLun suture zone (North Tibet)

The spinel peridotite from the Anyemaqen suture contains ?5% residual clinopyroxene and is characterized by a high abundance of the magmaphile elements Fe, Al and Ti in the primary mineral phases. Our data demonstrate that this rock represents residual mantle material, which has been affected by less than 10% partial melting prior to its emplacement. Its textural features indicate that the rock has been plastically deformed in a non-coaxial regime under lithospheric physical conditions at a relatively cool thermal regime below solidus temperature. We suggest that the peridotites from the Anyemaqen suture represent mantle material, which was either emplaced during incipient rifting on the Palaeozoic passive margin of Asia, or uplifted at slow spreading ridge setting in Paleo-Tethyan Ocean. Further researches are needed to make a definite choice between these two alternatives. To cite this article: E.A. Konstantinovskaia et al., C. R. Geoscience 335 (2003).     

A Bulk Theory For Air Mass Motion Along A High Mountain Ridge

A steady-state, spatial, large-scale, non-linear problemof the air massmotion along an undulating mountain ridge is consideredin the framework of bulktheory. The ridge is assumed to be so high that the airmass cannot top it, and, insteadof the actual ridge itself, a high vertical wall withsinuousities identical to those of theridge is considered. It is assumed that the air massis bounded above by an inversioninterface (idealized inversion layer) overlain by ageostrophic, polytropic, atmospherethat is thermally homogeneous along the horizontaland stably stratified with aconstant geostrophic wind blowing along the meandirection of the ridge. Theinversion strength (potential temperature deficit) isnot constant and considered as anadditional dependent variable. Because of the Earth'srotation effects, the air massflow to the left of the ridge and that to the rightof the ridge differ considerably intheir features. The fact that the characteristictransverse linear scale of the problem(the generalized Rossby radius of deformation) issmall compared with thelongitudinal scale permits making simplificationsthat result in a semi-geostrophicmodel of the boundary-layer type. Then the problemcan be reduced to an ordinarydifferential equation, which admits a closed-formsolution. Analysis of the solutionenables one to deduce some general features ofthe process under investigation suchas, for example, orographic front formation,a transition from sub-critical to super-criticalwind and others.     

As–(Ag) sulphide veins in the Spanish Central System: further evidence for a hydrothermal event of Permian age

The Spanish Central System (SCS) has been subjected to repeated deformation and fluid flow events which have produced both sulphide-bearing and barren vein systems. Although several hydrothermal episodes took place between 300 and 100 Ma, fluid circulation during the Permian was especially important, giving rise to a range of different types of deposits. This study presents a multidisciplinary approach leading to the characterisation of the chemistry and age of the hydrothermal fluids that produced the As–(Ag) mineralised stockwork of Mónica mine (Bustaviejo, Madrid). Fluid inclusion data indicate the presence of two different fluids. An initial ore stage (I) formed from a low- to moderate salinity (3–8 wt.% eq. NaCl) H₂O–NaCl–CO₂–CH₄ fluid, at minimum trapping temperature of 350±15 °C and 0.3 kbar. A second H₂O–NaCl fluid is found in three types of fluid inclusions: a high temperature and low salinity type (340±20 °C; 0.8–3.1 wt.% eq. NaCl) also associated to ore stage I, a moderate temperature and very low salinity type (160–255 °C; 0–1.5 wt.% eq. NaCl) represented in ore stage III, and a very low temperature and hypersaline type (60–70 °C; 30–35 wt.% NaCl), unrelated to the mineralising stages and clearly postdating the previous types. ⁴⁰Ar–³⁹Ar dating on muscovite from the early As–Fe stage (I) has provided an age of 286±4 Ma, synchronous with the late emplacement phases of La Cabrera plutonic massif (288±5 Ma) and with other Permian hydrothermal events like Sn–W skarns and W–(Sn) sulphide veins. δ¹⁸O of water in equilibrium with stage I quartz (5.3–7.7‰), δD of water in equilibrium with coexisting muscovite (−16.0‰ to −2.0‰), and sulphide δ³⁴S (1.5–3.6‰) values are compatible with waters that leached metamorphic rocks. The dominant mechanism of the As–(Ag) deposition was mixing and dilution processes between aqueous–carbonic and aqueous fluids for stage I (As–Fe), and nearly isobaric cooling processes for stages II (Zn–Cu–Sn) and III (Pb–Ag). The origin and hydrothermal evolution of As–(Ag) veins is comparable to other hydrothermal Permian events in the Spanish Central System.     

Induced seismicity in the Khibiny Massif (Kola Peninsula)

The topic of this paper is to review recent processes of increasing seismic activity in the Khibiny Massif in the Kcla Peninsula. It is a typical example of induced seismicity caused by rock deformation due to the extraction of more than 2·10⁹ tons of rock mass since the mid-1960s. The dependence of seismic activity on the amount of extracted ore is demonstrated. Some of the induced earthquakes coincide with large mining explosions, thus indicating a trigger mechanism. The largest earthquake, which occurred on 16 April 1989 (M _L= 4.1) could be traced along the surface for 1200 m and observed to a depth of at least 220 m. The maximum measured displacement was 15–20 cm.     

Electrical conductivity investigation of the Corso-Sardinian microplate area

The analysis of magnetovariational data from an array quasi- simultaneously covering Sardinia (Italy) and Corsica (France), from summer 1988 to spring 1991, indicates the existence of two major conducting bodies, one north of Corsica, the other south of Sardinia. Fourier maps also show local conductivity anomalies along the Campidano Graben (Sardinia), across the Bonifacio Straits and in the northernmost part of Corsica. Two-dimensional (2D) modelling and inversion procedures have been carried out in order to find the optimum conductivity and geometrical characteristics of the conductive bodies deduced from Fourier maps, induction arrows and pseudosections studies. As a result of the 2D inversion, two zones with enhanced electrical conductivity are found, respectively, in the Sardinia Channel and in the Bonifacio Straits. The former can be related to the thermal characteristics of the area; the latter, shallower, can be ascribed to an accumulation of sediments. Some short-period magnetovariational anomalies in northern Corsica can be related to recent reheating processes that occurred there, as well as to the crustal thinning in the Ligurian sea.     

57Fe Mössbauer study of the asbestiform silicates balangeroite and carlosturanite

⁵⁷FeMössbauer spectra of the two silicate minerals balangeroite (BAL) and carlosturanite (CST) have been collected at 80 and 295 K under normal and magic angle geometry. For both minerals the spectra have been fitted with two ferrous and two ferric doublets; Fe²⁺ accounts for 80 and 62% of Fe_tot in Bal and CST, respectively. The number of doublets used to fit the spectra supports the hypotheses that: (i) in the serpentine-like structure of CST iron occupies only octahedra which lie between the tetrahedral silicate strips; (ii) the octahedral framework of BAL (actually monoclinic) is satisfactorily described with an orthorhombic sub-cell.     

Sr–Nd–Pb isotopic compositions of the Kovdor phoscorite–carbonatite complex, Kola Peninsula, NW Russia

The Sr, Nd and Pb isotopic compositions for the Kovdor phoscorite–carbonatite complex (PCC), Kola Peninsula, NW Russia, have been determined to characterize the mantle sources involved and to evaluate the relative contributions of a plume and subcontinental lithospheric mantle in the formation of the complex. The Kovdor PCC is a part of the Kovdor ultramafic–alkaline–carbonatite massif, and consists of six intrusions. The initial isotopic ratios of the analyzed samples, calculated at 380 Ma, display limited variations: ε_Nd, + 2.0 to + 4.7; ⁸⁷Sr/⁸⁶Sr, 0.70319 to 0.70361 (ε_Sr, − 12.2 to − 6.2); ²⁰⁶Pb/²⁰⁴Pb, 18.38 to 18.74; ²⁰⁷Pb/²⁰⁴Pb, 15.45 to 15.50; ²⁰⁸Pb/²⁰⁴Pb, 37.98 to 39.28. The Nd and Sr isotope data of the Kovdor PCC generally fit the patterns of the other phoscorites and carbonatites from the Kola Alkaline Province (KAP), but some data are slightly shifted from the mixing line defined as the Kola Carbonatite Line, having more radiogenic ⁸⁷Sr/⁸⁶Sr ratios. However, the less radiogenic Nd isotopic compositions and negative Δ7/4 values of Pb isotopes of the analyzed samples exclude crustal contamination, but imply the involvement of a metasomatized lithospheric mantle source. Isotopic variations indicate mixing of at least three distinct mantle components: FOZO-like primitive plume component, EMI-like enriched component and DMM-like depleted component. The isotopic nature of the EMI- and DMM-like mantle component observed in the Kovdor samples is considered to be inherited from metasomatized subcontinental lithospheric mantle. This supports the previous models invoking plume–lithosphere interaction to explain the origin of the Devonian alkaline carbonatite magmatism in the KAP.