Pollution history and recovery of a boreal lake exposed to a heavy bleached pulping effluent load

We examined the effects of heavy pulp mill discharges on the Lake Lievestuoreenjärvi ecosystem and the later recovery of diatom and chironomid communities from age-dated short core samples. Beginning in 1927 the lake received a heavy effluent load from a sulphite pulp mill. Except for the recession during the Second World War and the temporary closure of the mill from 1967 to 1971, the industrial load, containing large quantities of nutrients, organic matter and toxic compounds, increased continuously. In the early 1980s, laboratory documents were falsified by the directors of the mill and the systematic illegal effluent overload led to a collapse of the whole lake ecosystem. In 1985, the outdated plant was finally closed down. Based on the assessment of chemical properties and biological remains of the sediment, we distinguished five developmental phases in the ecological state of the lake. In the pre-industrial phase, the pelagic and profundal benthic communities were dominated by species preferring ultraoligotrophic or oligotrophic lakes. Concomitant with the increasing discharge and deposition of chlorine compounds, resin acids, and mercury, as well as strong acidity and hypolimnetic and epilimnetic anoxia, the ecological status changed in a short period from excellent to bad. Finally, in the early 1960s, the majority of the lake was virtually dead and the aquatic life survived only in the uppermost littoral zone. Since 1985, a fast recovery in the water quality has led to a strong, but temporary eutrophy in pelagic communities. The main peak of eutrophication was caused by the invasion of a species new to the lake,Aulacoseira granulata var.angustissima. Later, the pelagic communities shifted towards oligotrophy, but the original, pre-industrial status has not been re-established. The profundal benthic communities have not achieved the pre-industrial structure, but at present indicate mesotrophy.     

Combining pixel and object based image analysis of ultra-high resolution multibeam bathymetry and backscatter for habitat mapping in shallow marine waters

Habitat mapping data are increasingly being recognised for their importance in underpinning marine spatial planning. The ability to collect ultra-high resolution (cm) multibeam echosounder (MBES) data in shallow waters has facilitated understanding of the fine-scale distribution of benthic habitats in these areas that are often prone to human disturbance. Developing quantitative and objective approaches to integrate MBES data with ground observations for predictive modelling is essential for ensuring repeatability and providing confidence measures for habitat mapping products. Whilst supervised classification approaches are becoming more common, users are often faced with a decision whether to implement a pixel based (PB) or an object based (OB) image analysis approach, with often limited understanding of the potential influence of that decision on final map products and relative importance of data inputs to patterns observed. In this study, we apply an ensemble learning approach capable of integrating PB and OB Image Analysis from ultra-high resolution MBES bathymetry and backscatter data for mapping benthic habitats in Refuge Cove, a temperate coastal embayment in south-east Australia. We demonstrate the relative importance of PB and OB seafloor derivatives for the five broad benthic habitats that dominate the site. We found that OB and PB approaches performed well with differences in classification accuracy but not discernible statistically. However, a model incorporating elements of both approaches proved to be significantly more accurate than OB or PB methods alone and demonstrate the benefits of using MBES bathymetry and backscatter combined for class discrimination.     

Geochemical Eccentricity of Ground Water Allied to Weathering of Basalts from the Deccan Volcanic Province,India: Insinuation on CO<Subscript>2</Subscript> Consumption

Analyses of 72 samples from Upper Panjhara basin in the northern part of Deccan Plateau, India, indicate that geochemical incongruity of groundwater is largely a function of mineral composition of the basaltic lithology. Higher proportion of alkaline earth elements to total cations and HCO₃>Cl + SO₄ reflect weathering of primary silicates as chief source of ions. Inputs of Cl, SO₄, and NO₃ are related to rainfall and localized anthropogenic factors. Groundwater from recharge area representing Ca + Mg–HCO₃ type progressively evolves to Ca + Na–HCO₃ and Na–Ca–HCO₃ class along flow direction replicates the role of cation exchange and precipitation processes. While the post-monsoon chemistry is controlled by silicate mineral dissolution + cation exchange reactions, pre-monsoon variability is attributable chiefly to precipitation reactions + anthropogenic factors. Positive correlations between Mg vs HCO₃ and Ca + Mg vs HCO₃ supports selective dissolution of olivine and pyroxene as dominant process in post-monsoon followed by dissolution of plagioclase feldspar and secondary carbonates. The pre-monsoon data however, points toward the dissolution of plagioclase and precipitation of CaCO₃ supported by improved correlation coefficients between Na + Ca vs HCO₃ and negative correlation of Ca vs HCO₃, respectively. It is proposed that the eccentricity in the composition of groundwater from the Panjhara basin is a function of selective dissolution of olivine > pyroxene followed by plagioclase feldspar. The data suggest siallitization (L < R and R _k) as dominant mechanism of chemical weathering of basalts, stimulating monosiallitic (kaolinite) and bisiallitic (montmorillonite) products. The chemical denudation rates for Panjhara basin worked out separately for the ground and surface water component range from 6.98 to 36.65 tons/km²/yr, respectively. The values of the CO₂ consumption rates range between 0.18 × 10⁶ mol//km²/yr (groundwater) and 0.9 × 10⁶ mol/km²/yr (surface water), which indicates that the groundwater forms a considerable fraction of CO₂ consumption, an inference, that is, not taken into contemplation in most of the studies.     

Rare earth elements in bottom sediments of major rivers around the Yellow Sea: implications for sediment provenance

Rare earth elements (REEs) of 91 fine-grained bottom sediment samples from five major rivers in Korea (the Han, Keum, and Yeongsan) and China (the Changjiang and Huanghe) were studied to investigate their potential as source indicator for Yellow Sea shelf sediments, this being the first synthetic report on REE trends for bottom sediments of these rivers. The results show distinct differences in REE contents and their upper continental crust (UCC)-normalized patterns: compared to heavy rare earth elements (HREEs), light rare earth elements (LREEs) are highly enriched in Korean river sediments, in contrast to Chinese river sediments that have a characteristic positive Eu anomaly. This phenomenon is observed also in primary source rocks within the river catchments. This suggests that source rock composition is the primary control on the REE signatures of these river sediments, due largely to variations in the levels of chlorite and monazite, which are more abundant in Korean bottom river sediments. Systematic variations in ΣLREE/ΣHREE ratios, and in (La/Yb)–(Gd/Yb)_UCC but also (La/Lu)–(La/Y)_UCC and (La/Y)–(Gd/Lu)_UCC relations have the greatest discriminatory power. These findings are consistent with, but considerably expand on the limited datasets available to date for suspended sediments. Evidently, the REE fingerprints of these river sediments can serve as a useful diagnostic tool for tracing the provenance of sediments in the Yellow Sea, and for reconstructing their dispersal patterns and the circulation system of the modern shelf, as well as the paleoenvironmental record of this and adjoining marginal seas.     

Height transformation models from ellipsoidal into the normal orthometric height system for the territory of the City of Zagreb

The paper presents the testing of the possibility of determining the heights of GPS points in the homogeneous field in the new Croatian Height Reference System (HVRS71) by using the method of height transformation. The testing was made in the area of Zagreb. As part of the field works, normal orthometric heights of 27 GPS points were determined according to the new height system, by transferring the benchmark heights using the geometric levelling method, thus obtaining GPS/levelling points of known ellipsoidal and normal orthometric heights. The GPS/levelling points served as the basis for determining the transformation models that enabled the computation of normal orthometric heights from ellipsoidal heights of any GPS point in the observed area. The empirical data used for modelling were reduced undulation dN values of GPS/levelling points. As part of the dN modelling with parametric functions, the approximation surfaces were obtained on the basis of three polynomials: FN310, FN312 and FN318. The transformation models were also tested using non-parametric Watson and Loess algorithms. The FN318 and Loess models yielded the best results.     

Upper-Tropospheric Environment–Tropical Cyclone Interactions over the Western North Pacific: A Statistical Study

Based on 25-year(1987–2011) tropical cyclone(TC) best track data, a statistical study was carried out to investigate the basic features of upper-tropospheric TC–environment interactions over the western North Pacific. Interaction was defined as the absolute value of eddy momentum flux convergence(EFC) exceeding 10 m s~(-1)d~(-1). Based on this definition, it was found that 18% of all six-hourly TC samples experienced interaction. Extreme interaction cases showed that EFC can reach~120 m s~(-1)d~(-1) during the extratropical-cyclone(EC) stage, an order of magnitude larger than reported in previous studies.Composite analysis showed that positive interactions are characterized by a double-jet flow pattern, rather than the traditional trough pattern, because it is the jets that bring in large EFC from the upper-level environment to the TC center. The role of the outflow jet is also enhanced by relatively low inertial stability, as compared to the inflow jet. Among several environmental factors, it was found that extremely large EFC is usually accompanied by high inertial stability, low SST and strong vertical wind shear(VWS). Thus, the positive effect of EFC is cancelled by their negative effects. Only those samples during the EC stage, whose intensities were less dependent on VWS and the underlying SST, could survive in extremely large EFC environments, or even re-intensify. For classical TCs(not in the EC stage), it was found that environments with a moderate EFC value generally below ~25 m s~(-1)d~(-1) are more favorable for a TC's intensification than those with extremely large EFC.     

Estimates of source parameters of <Emphasis Type=Italic>M</Emphasis>4.9 Kharsali earthquake using waveform modelling

This paper presents the computation of time series of the 22 July 2007 M 4.9 Kharsali earthquake. It occurred close to the Main Central Thrust (MCT) where seismic gap exists. The main shock and 17 aftershocks were located by closely spaced eleven seismograph stations in a network that involved VSAT based real-time seismic monitoring. The largest aftershock of M 3.5 and other aftershocks occurred within a small volume of 4 × 4 km horizontal extent and between depths of 10 and 14 km. The values of seismic moment (M _∘) determined using P-wave spectra and Brune’s model based on f ² spectral shape ranges from 10¹⁸ to 10²³ dyne-cm. The initial aftershocks occurred at greater depth compared to the later aftershocks. The time series of ground motion have been computed for recording sites using geometric ray theory and Green’s function approach. The method for computing time series consists in integrating the far-field contributions of Green’s function for a number of distributed point source. The generated waveforms have been compared with the observed ones. It has been inferred that the Kharsali earthquake occurred due to a northerly dipping low angle thrust fault at a depth of 14 km taking strike N279°E, dip 14° and rake 117°. There are two regions on the fault surface which have larger slip amplitudes (asperities) and the rupture which has been considered as circular in nature initiated from the asperity at a greater depth shifting gradually upwards. The two asperities cover only 10% of the total area of the causative fault plane. However, detailed seismic imaging of these two asperities can be corroborated with structural heterogeneities associated with causative fault to understand how seismogenesis is influenced by strong or weak structural barriers in the region.     

Influence of climatic teleconnections on the temporal isotopic variability as recorded in a firn core from the coastal Dronning Maud Land,East Antarctica

Ice and firn core studies provide one of the most valuable tools for understanding the past climate change. In order to evaluate the temporal isotopic variability recorded in ice and its relevance to environmental changes, stable isotopes of oxygen and hydrogen were studied in a firn core from coastal Dronning Maud Land, East Antarctica. The annual δ ¹⁸O profile of the core shows a close relation to the El Niño Southern Oscillation (ENSO) variability. The ENSO indices show significant correlation with the surface air temperatures and δ ¹⁸O values of this region during the austral summer season and support an additional influence related to the Southern Annular Mode (SAM). The correlation between the combined ENSO-SAM index and the summer δ ¹⁸O record seems to have been caused through an atmospheric mechanism. Snow accumulation in this region illustrates a decreasing trend with opposite relationships with δ ¹⁸O data and surface air temperature prior and subsequent to the year 1997. A reorganization of the local water cycle is further indicated by the deuterium excess data showing a shift around 1997, consistent with a change in evaporation conditions. The present study thus illustrates the utility of ice-core studies in the reconstruction of past climate change and suggests possible influence of climatic teleconnections on the snow accumulation rates and isotopic profiles of snow in the coastal regions of east Antarctica.     

Reduction of surface subsidence risk by fly ash exploitation as filling material in deep mining areas

The possibility of filling empty underground spaces, which exist owing to the extraction of mineral raw materials, with fly ash and cement fly ash mixes has been studied for the purpose of reducing the impact of deep mining on the surface. The method of physical modelling was used to study the behaviour of fly ash mixes deposited in extracted mine spaces. The models were constructed for two different geometries of underground extracted mine spaces: into cavities of the type of large slits created in the course of mining in steeply lode deposits without subsequently filling the empty space and in vertical shafts of rectangular or circular cross-section with horizontal side headings that have partly caved in due to mine shocks or other seismic events.     

Atlanta’s urban heat island under extreme heat conditions and potential mitigation strategies

The urban heat island (UHI), together with summertime heat waves, foster’s biophysical hazards such as heat stress, air pollution, and associated public health problems. Mitigation strategies such as increased vegetative cover and higher albedo surface materials have been proposed. Atlanta, Georgia, is often affected by extreme heat, and has recently been investigated to better understand its heat island and related weather modifications. The objectives of this research were to (1) characterize temporal variations in the magnitude of UHI around Metro Atlanta area, (2) identify climatological attributes of the UHI under extremely high temperature conditions during Atlanta’s summer (June, July, and August) period, and (3) conduct theoretical numerical simulations to quantify the first-order effects of proposed mitigation strategies. Over the period 1984–2007, the climatological mean UHI magnitude for Atlanta-Athens and Athens-Monticello was 1.31 and 1.71°C, respectively. There were statistically significant minimum temperature trends of 0.70°C per decade at Athens and −1.79°C per decade at Monticello while Atlanta’s minimum temperature remained unchanged. The largest (smallest) UHI magnitudes were in spring (summer) and may be coupled to cloud-radiative cycles. Heat waves in Atlanta occurred during 50% of the years spanning 1984–2007 and were exclusively summertime phenomena. The mean number of heat wave events in Atlanta during a given heat wave year was 1.83. On average, Atlanta heat waves lasted 14.18 days, although there was quite a bit of variability (standard deviation of 9.89). The mean maximum temperature during Atlanta’s heat waves was 35.85°C. The Atlanta-Athens UHI was not statistically larger during a heat wave although the Atlanta-Monticello UHI was. Model simulations captured daytime and nocturnal UHIs under heat wave conditions. Sensitivity results suggested that a 100% increase in Atlanta’s surface vegetation or a tripling of its albedo effectively reduced UHI surface temperature. However, from a mitigation and technological standpoint, there is low feasibility of tripling albedo in the foreseeable future. Increased vegetation seems to be a more likely choice for mitigating surface temperature.