Iron isotope fractionation in subduction-related high-pressure metabasites (Ile de Groix,France)

Characterisation of mass transfer during subduction is fundamental to understand the origin of compositional heterogeneities in the upper mantle. Fe isotopes were measured in high-pressure/low-temperature metabasites (blueschists, eclogites and retrograde greenschists) from the Ile de Groix (France), a Variscan high-pressure terrane, to determine if the subducted oceanic crust contributes to mantle Fe isotope heterogeneities. The metabasites have δ⁵⁶Fe values of +0.16 to +0.33‰, which are heavier than typical values of MORB and OIB, indicating that their basaltic protolith derives from a heavy-Fe mantle source. The δ⁵⁶Fe correlates well with Y/Nb and (La/Sm)_PM ratios, which commonly fractionate during magmatic processes, highlighting variations in the magmatic protolith composition. In addition, the shift of δ⁵⁶Fe by +0.06 to 0.10‰ compared to basalts may reflect hydrothermal alteration prior to subduction. The δ⁵⁶Fe decrease from blueschists (+0.19 ± 0.03 to +0.33 ± 0.01‰) to eclogites (+0.16 ± 0.02 to +0.18 ± 0.03‰) reflects small variations in the protolith composition, rather than Fe fractionation during metamorphism: newly-formed Fe-rich minerals allowed preserving bulk rock Fe compositions during metamorphic reactions and hampered any Fe isotope fractionation. Greenschists have δ⁵⁶Fe values (+0.17 ± 0.01 to +0.27 ± 0.02‰) similar to high-pressure rocks. Hence, metasomatism related to fluids derived from the subducted hydrothermally altered metabasites might only have a limited effect on mantle Fe isotope composition under subsolidus conditions, owing to the large stability of Fe-rich minerals and low mobility of Fe. Subsequent melting of the heavy-Fe metabasites at deeper levels is expected to generate mantle Fe isotope heterogeneities.     

Tunisian landfill leachate treatment using <Emphasis Type="Italic">Chlorella</Emphasis> sp.: effective factors and microalgae strain performance

The potential of the autoclaved Tunisian landfill leachate treatment using microalgae (Chlorella sp.) cultivation was investigated in this study. Landfill leachate was collected from Borj Chakir landfill, Tunisia. A full factorial experimental design 2² was proposed to study the effects of the incubation time and leachate ratio factors on the organic matter removal expressed in chemical oxygen demand (COD) and ammoniacal nitrogen (NH₄─N) and on the biological response of Chlorella sp. expressed by the cell density and chlorophyll content. All experiments were batch runs at ambient temperature (25 ± 2 °C). The Chlorella sp. biomass and chlorophyll a concentrations of 1.2 and 5.32 mg L^?1, respectively, were obtained with 10% leachate spike ratio. The obtained results showed that up to 90% of the ammoniacal nitrogen in landfill leachate was removed in 10% leachate ratio spiked medium with a residual concentration of 40 mg L^?1. The maximum COD removal rate reached 60% within 13 days of incubation time indicating that microalgae consortium was quite effective for treating landfill leachate organic contaminants. Furthermore, with the 10% leachate ratio spiked medium, the maximum lipid productivity was 4.74 mg L^?1 d^?1. The present study provides valuable information for potential adaptation of microalgae culture and its contribution for the treatment of Tunisian landfill leachate.     

Platinum group minerals in podiform chromitites of the Bou Azzer ophiolite, Anti Atlas, Central Morocco

Summary The Neoproterozoic Bou Azzer ophiolite complex hosts numerous, small lenticular bodies of massive and disseminated chromite. Metallurgical-grade high-Mg and high-Cr spinels (cores with 48–62 wt% Cr₂O₃) reveal complex alteration patterns of successive Cr and Mn enrichment and loss of Al towards the rims, while the Mg# ratios [(Mg/(Mg + Fe²⁺)] remain almost constant. Concentration patterns of platinum-group elements are typical for ophiolitic chromitite poor in sulfides, with predominance of the IPGE, variable Rh, and low Pt and Pd. The most abundant platinum-group mineral is Rh-bearing laurite that occurs either included in spinel or in silicate matrix, whereas Os-Ir-Ru alloy is always included in spinel. Laurite inclusions reveal complex intergrowth textures with Rh-Ru-Pt rich alloy, and with Rh-rich sulfide. Most laurites display trends to sulfur-poor compositions leading to local formation of very fine-grained Ru-Os-Ir alloy phases. Ni-Co-Fe sulfides, arsenides and sulfarsenides devoid of PGE are associated with the alteration of chromite. Textural position and chemical composition of the base metal inclusions, as well as comparison of alteration features between chromite and accessory chromian spinel in the Co-Ni-As ores of the Bou Azzer ophiolite indicate a close connection. It is suggested that hydrothermal fluids percolated through the marginal zones of the ophiolite belt during greenschist facies metamorphism and deposited Ni-Co-Fe arsenides, sulfarsenides and minor sulfides as accessories within altered chromitites, and also in structurally favourable zones as Ni-Co-As ores. Author’s address: Dr. Frank Melcher, Federal Institute for Geosciences and Natural Resources, Stilleweg 2, 30655 Hannover, Germany     

Net radiation over the Aswan High Dam Lake

Summary Net radiation is an essential parameter for estimating evaporation from large water surfaces by energy balance method. Net radiation has been measured for the first time over the Aswan High Dam Lake on the Nile River for 132 days including warm and cold seasons. A high multiple linear correlation coefficient of 0.98 was obtained between the measured net radiation on the one hand and the global solar radiation measured at Aswan and the difference between water and air temperatures measured over the Lake on the other hand.Seven different empirical formulae for estimating the effective outgoing radiation have been applied on the average data measured over the Lake for days of clear sky. It has been found that the Swinbank formula is the best one suitable for the location of the Aswan High Dam Lake.With 2 Figures     

Pore‐scale modeling of surface erosion in a particle bed

A fully coupled transient two‐dimensional model was employed to study fundamentals of flood‐induced surface erosion in a particle bed. The interaction of the liquid and solid phases is the key mechanism related to surface erosion. The solid phase was idealized at a particle scale by using the discrete element method. The fluid phase was modeled at a mesoscale level and solved using the lattice Boltzmann method. The fluid forces applied on the particles were calculated on the basis of the momentum the fluid exchanges with the particle. The proposed approach was used to model both single particles and particle beds subjected to Couette flow conditions. The behavior of both the single particle and the particle bed depended on particle diameter and surface shear fluid velocity. The conducted simulations show that the fluid flow profile penetrates the bed for a small distance. This penetration initiates sheet‐flow and surface erosion as the fluid interacts with particles. The effect of suppressing particle rotation on the fluid‐induced forces on the particle was also examined. Suppressing particle spinning may lead to underestimated erosion rate. Results of fluid and particle velocities were compared against experimental results and appeared to agree with the observed trends.Copyright © 2013 John Wiley & Sons, Ltd.     

Time dependent chemical study of contracting interstellar clouds. II. abundances of oxygen- and sulphur-bearing molecules

Abstract. We have constructed a chemical reaction system in a contracting interstellar cloud. In paper (I) we have presented the details of the physical and chemical scheme and the method of solution. The results of our chemical model produce fractional abundances of H₂CO, CO, OH, H₂O, SO and OCS which are in good agreement with the results of observations. On the other hand, the results of chlorine-bearing species are not in agreement with those of the observations. The calculated abundances of H₂CO, CO, OH, H₂O, SO, OCS and Cl⁺ are in agreement with the results of previous theoretical studies.     

Nonequilibrium solidification and microstructures of metal phases in the shock-induced melt of the Yanzhuang (H6) chondrite

Abstract— Dendrites in the metal-troilite spherules in both shock-induced melt veins and a melt pocket of the Yanzhuang chondrite show zoning in their microstructures. This feature is indicative of nonequilibrium solidification of the metal phases. Dendrites in the melt pocket have a typical crust-core structure consisting of martensitic interiors (7.5–8.1 wt% Ni) and Ni-rich rims (12.5–23.3 wt% Ni). In comparison, the dendrites in melt veins have three microstructural areas: (1) core (6.4–7.3 wt% Ni); (2) martensite between the core and rim (7.4–8.5 wt.% Ni); (3) Ni-rich rim (12.8–21.4 wt% Ni). It is suggested that the difference in cooling rates following shock-induced high temperature melting might be an important factor in producing the different dendritic microstructures in melt veins and melt pocket. Cooling rates deduced from measurements of secondary dendritic arm spacings are 100–400 °C/s in the melt veins and 6–30 °C/s in the melt pocket, respectively, and lie in the temperature interval 950 to 1400 °C.     

Unusual occurrence of glauconite in a shallow lagoonal environment (Lower Cretaceous, northern Aquitaine Basin, SW France)

Some minerals are considered to be representative of specific natural environments. Among them glauconite is considered to be formed in marine deep platform conditions. However, the term glauconitic is misused to designate green minerals formed in marine outer-shelf environments. X-ray diffraction, scanning electron microscopy and energy-dispersive X-ray analyses of individual green materials were carried out leading to the identification of glauconite in the Purbeckian facies. Green glauconite grains predominantly occur as burrow fills and occasionally as faecal pellet replacements. Two depositional environments have been identified from bottom to top of the succession: (1) an argillaceous dolomitic lagoonal sediment formed in saline, shallow water; (2) a marl-limestone alternation deposited in a brackish water estuary. The crystallochemical properties of the glauconites change abruptly. These findings show that glauconite may form in coastal environments and not only in mid-shelf to upper deep water platform environments as classically assumed. Moreover, the glauconite composition changes with the chemical conditions imposed by the local environment.     

Angular radiation transfer in inhomogeneous dispersive media

The equation of radiative transfer for an inhomogenous dispersive finite medium subject to general boundary conditions is solved. The Padé approximation technique is used to calculate the angular distribution of radiation. Numerical results for the [0/1] Padé approximant lead to numerical results that compared with the exact results.     

Over-reflection of hydromagnetic planetary-gravity waves at the solar helmet streamers and magnetic sectors

Over-reflection of propagating hydromagnetic planetary-gravity waves incident on the current sheets of the helmet streamers and magnetic sectors of the solar corona is investigated.It is shown that over-reflection arises only if the wavenumbers, or the energy fluxes per unit mass, perpendicular to the current sheet of the incident and the transmitted waves in both cases are in opposite directions. The over-reflected waves then draw magnetic energy from the sun's field and communicate it to the interplanetary magnetic field.The National Center for Atmospheric Research is sponsored by the National Science Foundation.