Groundwater contamination assessment in Al-Quwy’yia area of central Saudi Arabia using transient electromagnetic and 2D electrical resistivity tomography

Groundwater contamination is one of the most significant problems in arid countries. Al-Quwiy’yia region is an example of an area where the groundwater is contaminated as a result of infiltration of waste water in low-lying areas adjacent to inhabited zones. Such contamination poses significant environmental threats for the surrounding environment and groundwater. Surface observations and spatial distribution of contamination observed in the shallow aquifer indicate that the main contamination sources were from sewage as well as from waste water dumping. However, the main source of water supply for the whole area is groundwater abstracted from the relatively shallow aquifer. Therefore, the transient electromagnetic method (TEM) and 2D electrical resistivity tomography (2D ERT) have been applied close to the waste water dump site to characterize the response of pollution plumes. Both of these geoelectrical techniques are sensitive to electrical conductivity as well as to other physical properties, which are greatly influenced by the polluted groundwater. Therefore, it is possible to profile the contamination plumes, both vertically and horizontally, in the vicinity of the measured stations. The ERT profiles gave detailed information about the lateral distribution of the contaminated groundwater, whereas the TEM demonstrated the vertical extensions.     

The impact of subsurface geological structure on the groundwater occurrence using geophysical techniques in wadi El Kallabiyyah and wadi As Sabil,East Esna,Eastern Desert,Egypt

The present study aims to explain some hydrogeological problems that are related to geological setting in two wadis: El Kallabiyyah and As Sabil East Esna. For this purpose, land magnetic, vertical electrical soundings, and two-dimensional electrical resistivity imaging profiles were measured. The lithological succession comprises Upper Cretaceous to Quaternary deposits that rest on a Precambrian basement rock. The results of the interpretation of the land magnetic measurements in wadi El Kallabiyyah represent the depth to the basement rock which ranges from 260 to 660 m and increases towards the northeast trend, but in wadi As Sabil, there is a large basin at the center of the wadi with the recorded depth to the basement reaching 1,300 m due to the effect of two normal faults (F1 and F2). The results of the interpretation of the vertical electrical sounding and two-dimensional imaging confirmed the presence of these faults in wadi As Sabil. The results of the geoelectrical measurements in wadi El Kallabiyyah represented the water-bearing layer at the third unit that consists of sands, gravels, boulders, and clays. The presence of clay will affect the potentiality of a drilled well. For wadi As Sabil, the results of geoelectrical measurements led to the lower part of the second unit which acts as a water-bearing layer that consists of sands, boulders, gravels, and clays. It can be concluded that the best site for drilling wells in wadi El Kallabiyyah is at vertical electrical sounding no.5 with a total depth of not less than 230 m. In wadi As Sabil, the drilled wells must be concentrated at the center and the downstream.     

Application of spectral analysis technique on ground magnetic data to calculate the Curie depth point of the eastern shore of the Gulf of Suez,Egypt

The bottom of the magnetized crust determined from the spectral analysis of magnetic anomaly is interpreted as a level of the Curie point isotherm. A spectral analysis technique was used to estimate the depth of the magnetic anomalies sources (Curie point depth analysis) of the eastern shore of the Gulf of Suez, Egypt. The depth to the tops and centers of the magnetic anomalies are calculated by azimuthally averaged power spectrum method for the whole area. The results obtained suggests from this study showed that the average depth to the top of the crustal block ranges between 1.15 and 1.9 km, whereas the average depth to the center of the deepest crustal block ranges between 9.1 and 12.7 km. Curie point depths in the study area range between 14.5 km in the northwestern part of the study area and 26 km in the southeastern part of the study area. The results imply a high geothermal gradient (34.7 °C/km) and corresponding high heat flow value (72.87 mW/m²) in the northwestern part of the study area. The southeastern part of the study area displays a low geothermal gradient (24.26 °C/km) and low heat flow value (50.9 mW/m²). These results are consistent with the existence of the possible promising geothermal reservoir in the eastern shore of the Gulf of Suez especially at Hammam Faraun area.     

Hydrogeophysical investigations on the Pleistocene aquifer,Kom Hamada area,West Nile Delta,Egypt

Hydrogeophysical investigations of the Pleistocene aquifer at the Kom Hamada area, Egypt, have been conducted to determine the characteristics of groundwater. The main water-bearing formations in the study area are composed of Quaternary deposits. Water samples were taken and chemically analyzed at 29 sites. The constructed iso-salinity contour map of the study area showed an increase in salinity from 451.75 mg/l at eastern parts to 1,091.85 mg/l at western parts. The groundwater of the study area showed a hydrochemical evolution from Ca–HCO₃ at the eastern side to Na–Cl at the western side. Some of groundwater constituents have high concentration values exceeding the safe limit for drinking. Eighteen vertical electrical soundings (VES) were conducted in the study area. These soundings were conducted near existing wells to obtain layer parameters of the various penetrated layers and to calculate the petrophysical characteristics of the aquifers. The resistivity of the first water-bearing layer ranges between 34 and 47 Ω m. The thickness of this layer ranges between 26 and 79 m. This layer represents the first aquifer, where it is followed by another water-bearing layer with resistivity ranges between 29 and 62 Ω m and extends downward. The two aquifers are hydraulically connected. Variation of the resistivities of these two water-bearing layers is mainly due to the lithological variation. The resistivity values along with the TDS values of the two water-bearing layers indicate fresh to brackish water types.     

Distribution and Enrichment of Heavy Metals in Recent Sediments of Safaga Bay,Egypt

The present study was undertaken for assessing the level of heavy metals such as iron, manganese, zinc, copper, nickel, cadmium, lead, and cobalt in recent sediment samples of Safaga Bay, Egypt. Concentration of heavy metals in sediments shows significant variability and ranges from 863.37 to 1144.93 ppm for Fe, 64.29–586.8 ppm for Mn, 2.7–12.68 ppm for Zn, 3.01–7.2 ppm for Pb, 1.53–3.29 ppm for Ni, 0.55–1.57 ppm for Co, 0.16–1.37 ppm for Cu, and 0.22–0.4 ppm for Cd.

Sediment pollution assessments were carried out using an enrichment factor and geoaccumulation index. The calculation of enrichment factor showed that Cd is enriched by 4.1 due to phosphate sources in Safaga Bay. The Geoaccumulation index results revealed that there are positive and negative correlations between Fe, Zn, Mn, Pb, Ni, Cu, Co, and Cd indicating that these metals have complicated geochemical behaviors.     

Uranium-rich opal from the Nopal I uranium deposit, Peña Blanca, Mexico: Evidence for the uptake and retardation of radionuclides

The Nopal I uranium deposit of the Sierra Peña Blanca, Mexico, has been the focus of numerous studies because of its economic importance and its use as a natural analog for nuclear-waste disposal in volcanic tuff. Secondary uranyl minerals such as uranophane, Ca[(UO₂)(SiO₃OH)]₂(H₂O)₅, and weeksite, (K,Na)₂[(UO₂)₂(Si₅O₁₃)](H₂O)₃, occur in the vadose zone of the deposit and are overgrown by silica glaze. These glazes consist mainly of opal A, which contains small particles of uraninite, UO₂, and weeksite. Close to a fault between brecciated volcanic rocks and welded tuff, a greenish silica glaze coats the altered breccia. Yellow silica glazes from the center of the breccia pipe and from the high-grade pile coat uranyl-silicates, predominantly uranophane and weeksite. All silica glazes are strongly zoned with respect to U and Ca, and the distribution of these elements indicates curved features and spherical particles inside the coatings. The concentrations of U and Ca correlate in the different zones and both elements inversely correlate with the concentration of Si. Zones within the silica glazes contain U and Ca in a 1:1 ratio with maximum concentrations of 0.08 and 0.15 at.% for the greenish and yellow glazes, respectively, suggesting trapping of either Ca₁U₁-aqueous species or -particles in the colloidal silica. X-ray photoelectron spectroscopy (XPS), Fourier-transform infra-red spectroscopy (FTIR), and oxygen-isotope ratios measured by secondary-ion mass spectrometry (SIMS) indicate higher U⁶⁺/U⁴⁺ ratios, higher proportions of Si-OH groups and lower δ¹⁸O values for the greenish silica glaze than for the yellow silica glaze. These differences in composition reflect increasing brecciation, porosity, and permeability from the center of the breccia pipe (yellow silica glaze) toward the fault (green silica glaze), where the seepage of meteoric water and Eh are higher.     

A transition from CMIP3 to CMIP5 for climate information providers: the case of surface temperature over eastern North America

The release of new data constituting the Coupled Model Intercomparison Project—Phase 5 (CMIP5) database is an important event in both climate science and climate services issues. Although users’ eagerness for a fast transition from CMIP3 to CMIP5 is expected, this change implies some challenges for climate information providers. The main reason is that the two sets of experiments were performed in different ways regarding radiative forcing and hence continuity between both datasets is partially lost. The objective of this research is to evaluate a metric that is independent of the amount and the evolution of radiative forcing, hence facilitating comparison between the two sets for surface temperature over eastern North America. The link between CMIP3 and CMIP5 data sets is explored spatially and locally (using the ratio of local to global temperatures) through the use of regional warming patterns, a relationship between the grid-box and the global mean temperature change for a certain time frame. Here, we show that local to global ratios are effective tools in making climate change information between the two sets comparable. As a response to the global mean temperature change, both CMIP experiments show very similar warming patterns, trends, and climate change uncertainty for both winter and summer. Sensitivity of the models to radiative forcing is not assessed. Real inter-model differences remain the largest source of uncertainty when calculating warming patterns as well as spatially-based patterns for the pattern scaling approach. This relationship between the datasets, which may escape users when they are provided with a single radiative forcing pathway, needs to be stressed by climate information providers.     

Spatial distribution and temporal trends of persistent organochlorine pollutants in sediments from Lake Maryut, Alexandria, Egypt

Organochlorine compounds (OCs) in surface and core sediments collected from Lake Maryut, Egypt, were examined to elucidate their distribution, ecological risk and historical trend. To our knowledge, this is the first study on residue levels of OCs in sediments from Lake Maryut. Concentrations of PCBs and DDTs were higher than other OCs, ranging from 3.06 to 388 and from 0.07 to 106 ng/g dry wt., respectively. The highest concentrations of OCs were found at stations near the discharge point of sewage and close to industrial areas. The distribution of DDT and its metabolites suggest no recent inputs into the lake environment. Contamination levels of sedimentary PCBs and DDTs, can be categorized moderate to high compared to other urbanized regions worldwide. Temporal trends in OCs levels were influenced by input pathways at two sites. Evaluation of ecotoxicological risks suggests that adverse biological effects are expected mainly in the main basin area.