Geological and geophysical investigation of Kamil crater,Egypt

Abstract– We detail the Kamil crater (Egypt) structure and refine the impact scenario, based on the geological and geophysical data collected during our first expedition in February 2010. Kamil Crater is a model for terrestrial small‐scale hypervelocity impact craters. It is an exceptionally well‐preserved, simple crater with a diameter of 45 m, depth of 10 m, and rayed pattern of bright ejecta. It occurs in a simple geological context: flat, rocky desert surface, and target rocks comprising subhorizontally layered sandstones. The high depth‐to‐diameter ratio of the transient crater, its concave, yet asymmetric, bottom, and the fact that Kamil Crater is not part of a crater field confirm that it formed by the impact of a single iron mass (or a tight cluster of fragments) that fragmented upon hypervelocity impact with the ground. The circular crater shape and asymmetries in ejecta and shrapnel distributions coherently indicate a direction of incidence from the NW and an impact angle of approximately 30 to 45°. Newly identified asymmetries, including the off‐center bottom of the transient crater floor downrange, maximum overturning of target rocks along the impact direction, and lower crater rim elevation downrange, may be diagnostic of oblique impacts in well‐preserved craters. Geomagnetic data reveal no buried individual impactor masses >100 kg and suggest that the total mass of the buried shrapnel >100 g is approximately 1050–1700 kg. Based on this mass value plus that of shrapnel >10 g identified earlier on the surface during systematic search, the new estimate of the minimum projectile mass is approximately 5 t.     

Late Bronze Age paleogeography along the ancient Ways of Horus in Northwest Sinai,Egypt

The northwest Sinai contained the eastern frontier of New Kingdom Egypt during the Late Bronze Age. The ancient Pelusaic branch of the Nile Delta influenced the environmental setting of this region at that time. Fortresses were built along the coastal byway through the study area known as the Ways of Horus to protect Egyptian‐held territory from immigrants and intruders from Canaan and the Mediterranean Sea. Building on previous geomorphic studies in the region, this paper presents the results of field investigations of Holocene sedimentary deposits, aided by satellite photography, used to create a paleogeographic map that places archaeological sites in their proper environmental context. CORONA satellite photographs from the late 1960s reveal surface features that have been obscured by more recent agricultural development in the region. Canals dug for an agricultural project provided easy access to the shallow subsurface for mapping the extent of Holocene sediments representing barrier coast, lagoon, estuarine, fluvial, and marsh depositional environments. © 2008 Wiley Periodicals, Inc.     

Role of Fracturing in the Organization of the Karst Features of Azrou Plateau (Middle Atlas,Morroco) Studied by Remote Sensing Imagery

Karst formation geometry can be controlled by fractures and faults, and by other lithologies. Here we show the organization of kastic collapse features related to structures and to extensive basaltic lava flows in the Middle Atlas of Morocco. A lineament map of major faults and fractures has been created for the Middle Atlas using Landsat 7 ETM⁺ satellite images. This shows a dominant NE–SW regional direction and less prominent NNW–SSE and ENE–WSE directions. All these directions coincide with the alignments of karstic depressions that have formed in the Liassic limestones. The basaltic flows covering these formations on the Middle Atlas limestone plateau, have allowed the generation of cryptokarst, geometrically organized a long these major lineament directions. Karst landforms probabaly existed before the eruption of the lavas, but there were partly invaded by intrusions and volcanism. The extensive basaltic flows allowed for increased infiltration, and subsurface water flow, increasing the rate of kast formation after eruptions. Some basins show evidence of increased subsidence after lava emplacement (Aguelmam Sidi Ali Lake) and some maar-like craters also have subsided after eruption, by karts formation. We lay out the structural and lithological controls on Karstic formation in an intraplate volcanic field based on limestones and evaporites.     

Evaluating the Ability of CRCM5 to Simulate Mixed Precipitation

Precipitation episodes in the form of freezing rain and ice pellets represent natural hazards affecting eastern Canada during the cold season. These types of precipitation mainly occur in the St. Lawrence River valley and the Atlantic provinces of Canada. This study aims to evaluate the ability of the fifth-generation Canadian Regional Climate Model (CRCM5), using a 0.11° horizontal grid mesh, to hindcast mixed precipitation when driven by reanalyses produced by the European Centre for Medium-range Weather Forecasts (ERA-Interim) for a 35-year period. In general, the CRCM5 simulation slightly overestimates the occurrence of freezing rain, but the geographical distribution is well reproduced. The duration of freezing rain events and accompanying surface winds in the Montréal region are reproduced by CRCM5. A case study is performed for an especially catastrophic freezing-rain event in January 1998; the model succeeds in simulating the intensity and duration of the episode, as well as the propitious meteorological environment. Overall, the model is also able to reproduce the climatology and a specific event of freezing rain and ice pellets.     

Fuzzy logic and multi-criteria methods for groundwater potentiality mapping at Al Fo’ah area,the United Arab Emirates (UAE): an integrated approach

This study has modified an approach based on fuzzy logic in a GIS and multi-criteria decision making (MCDM) for groundwater potentiality mapping in Al Fo’ah area, the United Arab Emirates. The proposed approach uses nine groundwater conditioning factors recognized by local hydrology experts. Each factor and class of each factor was given a weight and score based on its level of contributions to groundwater accumulation using analytical hierarchy process and MCDM. Our results revealed that the areas of very high harbouring groundwater are located at the foot of the Oman mountains and occupies an area of about 8.46 km² (4%) of the study area. We validated our results using the Relative Operating Characteristics. The area under the curve showed a ratio of 0.8957 (of 89.57%). The modified approach is timely and economically effective and can be applied in semi-arid regions to help hydrologists.     

Assessment of mesoscale convective systems using IR brightness temperature in the southwest of Iran

In this research, the spatial and temporal distribution of Mesoscale Convective Systems was assessed in the southwest of Iran using Global merged satellite IR brightness temperature (acquired from Meteosat, GOES, and GMS geostationary satellites) and synoptic station data. Event days were selected using a set of storm reports and precipitation criteria. The following criteria are used to determine the days with occurrence of convective systems: (1) at least one station reported 6-h precipitation exceeding 10 mm and (2) at least three stations reported phenomena related to convection (thunderstorm, lightning, and shower). MCSs were detected based on brightness temperature, maximum areal extent, and duration thresholds (228 K, 10,000 km², and 3 h, respectively). An MCS occurrence classification system is developed based on mean sea level, 850 and 500 hPa pressure patterns.

The results indicated that the highest frequency of MCSs occurred in December and April. Assessment of MCSs spatial frequency showed that MCS occurrence is strongly correlated with topography in April and May unlike the cold months. In other words, the role of Zagros Mountains in developing MCSs varies based on the season so that its impact increases with enhancement of mean monthly temperature. In addition, the occurrence of MCSs depends closely on the configuration of the Sudan Low in the southwest of Iran.

     

Regularized Bayesian estimation for GEV-B-splines model

Large observed datasets are not stationary and/or depend on covariates, especially, in the case of extreme hydrometeorological variables. This causes the difficulty in estimation, using classical hydrological frequency analysis. A number of non-stationary models have been developed using linear or quadratic polynomial functions or B-splines functions to estimate the relationship between parameters and covariates. In this article, we propose regularised generalized extreme value model with B-splines (GEV-B-splines models) in a Bayesian framework to estimate quantiles. Regularisation is based on penalty and aims to favour parsimonious model especially in the case of large dimension space. Penalties are introduced in a Bayesian framework and the corresponding priors are detailed. Five penalties are considered and the corresponding priors are developed for comparison purpose as: Least absolute shrinkage and selection (Lasso and Ridge) and smoothing clipped absolute deviations (SCAD) methods (SCAD1, SCAD2 and SCAD3). Markov chain Monte Carlo (MCMC) algorithms have been developed for each model to estimate quantiles and their posterior distributions. Those approaches are tested and illustrated using simulated data with different sample sizes. A first simulation was made on polynomial B-splines functions in order to choose the most efficient model in terms of relative mean biais (RMB) and the relative mean-error (RME) criteria. A second simulation was performed with the SCAD1 penalty for sinusoidal dependence to illustrate the flexibility of the proposed approach. Results show clearly that the regularized approaches leads to a significant reduction of the bias and the mean square error, especially for small sample sizes (n < 100). A case study has been considered to model annual peak flows at Fort-Kent catchment with the total annual precipitations as covariates. The conditional quantile curves were given for the regularized and the maximum likelihood methods.     

The transverse dynamics of flow in a tidal channel within a greater strait

Vessel-mounted ADCP measurements were conducted to describe the transverse structure of flow between the two headland tips in Khuran Channel, south of Iran (26° 45′ N), where the highest tidal velocities in spring tides were ~?1.8 m/s. Current profiles were obtained using a 614.4 kHz TRDI WorkHorse Broadband ADCP over nine repetitions of three cross-channel transects during one semidiurnal tidal cycle. The 2.2-km-long transects ran north/south across the channel. A least-square fit to semidiurnal, quarter-diurnal, and sixth diurnal harmonics was used to separate the tidal signals from the observed flow. Spatial gradients showed that the greatest lateral shears and convergences were found over the northern channel and near the northern headland tip due to very sharp bathymetric changes in this area. Contrary to the historical assumption, the across-channel momentum balance in the Khuran Channel was ageostrophic. The current study represents one of the few examples reported where the lateral friction influences the across-channel momentum balance.     

Stability of elevated liquid-filled conical tanks under seismic loading,Part I—theory

Conical steel shells are widely used as water containments for elevated tanks. However, the current codes for design of water structures do not specify any procedure for handling the seismic design of such structures. In this paper, a numerical model is developed for studying the stability of liquid-filled conical tanks subjected to seismic loading. The model involves a previously formulated consistent shell element with geometric and material non-linearities included. A boundary element formulation is derived to obtain the hydrodynamic pressure resulting from both the horizontal and the vertical components of seismic motion acting on a conical tank which is prevented from rocking. The boundary element formulation leads to a fluid added-mass matrix which is incorporated with the shell element formulation to perform non-linear dynamic stability analysis of such tanks subjected to both horizontal and vertical components of ground motion. Although, the formulation was developed for conical vessels, it is general and can be easily modified to study the stability of any liquid-filled shell of revolution subjected to seismic loading. The accuracy of fluid added-mass formulation was verified by performing the free vibration analysis of liquid-filled cylindrical tanks and comparing the results to those available in the literature. © 1997 John Wiley & Sons, Ltd.