Groundwater beneath the urban area of Khan Younis City,southern Gaza Strip (Palestine): assessment for multi-domestic purposes

The present study research investigation is aimed to assess the groundwater quality for the urban area in Khan Younis City, southern Gaza Strip, for multi-domestic purposes. The physicochemical analysis of the groundwater wells shows the major ions in the order of Na⁺ > Mg²⁺ > Ca²⁺ > B³⁺ > K⁺ and Cl^? > HCO₃ ^? > SO₄ ^2? > NO₃ ^2? > F^? > PO₄ ^3?. Groundwater quality is classified as very hard-brackish water type. Ninety-five percent of the wells are classified as saline water type with high NO₃ ^2? concentrations. Based on water quality index (WQI), the groundwater falls into one of three categories: fair water (10%), poor water (15%), very poor (45%), and worst (30%). The high WQI values are because of high Na⁺, Cl^?, SO₄ ^2?, and NO₃ ^2? concentrations, while synthetic pollution index (SPI) values indicate that most about 80% of the wells are seriously polluted. Langelier Saturation Index (LSI) indicates that most of data are either slightly scale forming or corrosive water or slightly corrosive but non-scale forming, and 75% of the wells are suitable for construction purposes (have SO₄ ^2? concentrations <300 mg/L). The groundwater reaches alarming situation, where almost chemically unsuitable for drinking purposes and the water to be used after proper treatment such as desalination.     

Groundwater hydrochemistry and origin in the south-eastern part of Wadi El Natrun,Egypt

The demand for water is rapidly increasing in Egypt, because of high population and agriculture production growth rate, which makes research of water resources necessary. The regional multi-aquifer system of the Miocene–Pleistocene age is discharged in Wadi El Natrun area. Intensive aquifer overexploitation and agricultural development in the area are related to groundwater quality deterioration. Hydrochemical and hydrogeological data was evaluated to determine the groundwater origin and quality in the south-eastern part of wadi, which appears to be more significant for water supply owing to lower groundwater salinity. The dominance of the high mineralised Cl groundwater type was found; however, also less mineralised SO₄ and HCO₃ types were identified there. Based on the ion relations, halite and gypsum dissolution and ion exchange are the most important hydrochemical processes forming the groundwater chemical composition. The Cl dominated groundwater matches the discharge part of the regional hydrogeological system. Contrary, the presence of HCO₃ and SO₄ hydrochemical types corresponds to the infiltration and transferring parts of the hydrogeological system indicating the presence of zones conducting low mineralised groundwater. The discharge area of the over-pumped aquifer in Wadi El-Natrun lies 23 m beneath the sea level with the shoreline being at the distance of 100 km, thus there is a real risk of seawater intrusion. Using the hydrochemical facies evolution diagram, four samples in the centre of the discharge area indicate advanced seawater intrusion. The zones of the highest demand for groundwater quality protection were indicated based on a spatial pattern of hydrogeochemical composition.     

Analysis of contamination hazard of surface water by the methodology of TECHNEAU: a case study from the dam 9 April 1947 in northern Morocco

Preventive protection of surface waters against pollution and the guarantee of the best quality water are the major challenges to provide a sustainable supply of drinking water for the future generations. In this article, we present a hazard mapping application for water contamination of the dam “9 April 1947” located in the northwest of Morocco. This study was motivated by the proliferation of many pollution sources in the study area knowing that the dam feeds the region of Tanger-Asilah that has over 3 million inhabitants. The methodology used was applied for the first time in the city of Freiburg-Ebnet in Germany under the TECHNEAU project funded by the European commission and based on weighting of the different sources of contamination according to three indices: the toxicity index, quantity index, and probability index. The multiplication of the three indices has given us a hazard index named HI varying between 0 and 120 depending on the harmfulness of hazard; the later index has been used to create the final contamination hazard map. The hazard map shows 65% of the watershed area is witnessing a very low danger, 22% of the watershed area is witnessing a low danger, 10% of the watershed area is witnessing a the high danger, and 3% of the watershed area is witnessing a moderate.     

Landslide susceptibility mapping using analytic hierarchy process and information value methods along a highway road section in Constantine,Algeria

This research work deals with the landslide susceptibility assessment using Analytic hierarchy process (AHP) and information value (IV) methods along a highway road section in Constantine region, NE Algeria. The landslide inventory map which has a total of 29 single landslide locations was created based on historical information, aerial photo interpretation, remote sensing images, and extensive field surveys. The different landslide influencing geoenvironmental factors considered for this study are lithology, slope gradient, slope aspect, distance from faults, land use, distance from streams, and geotechnical parameters. A thematic layer map is generated for every geoenvironmental factor using Geographic Information System (GIS); the lithological units and the distance from faults maps were extracted from the geological database of the region. The slope gradient, slope aspect, and distance from streams were calculated from the Digital Elevation Model (DEM). Contemporary land use map was derived from satellite images and field study. Concerning the geotechnical parameters maps, they were determined making use of the geotechnical data from laboratory tests. The analysis of the relationships between the landslide-related factors and the landslide events was then carried out in GIS environment. The AUC plot showed that the susceptibility maps had a success rate of 77 and 66% for IV and AHP models, respectively. For that purpose, the IV model is better in predicting the occurrence of landslides than AHP one. Therefore, the information value method could be used as a landslide susceptibility mapping zonation method along other sections of the A1 highway.     

Modeling soil erosion using RUSLE and GIS in a watershed occupied by rural settlement in the Brazilian Cerrado

The installation of a rural settlement complex in the watershed stream Indaiá has promoted changes in land-use and vegetation cover dynamics; however, the effects of intensive agriculture and cattle farming in rural settlements on soil loss rates are not well known. Predictive models implemented in geographic information systems have proven to be effective tools for estimating erosive processes. The erosion predictive model Revised Universal Soil Loss Equation (RUSLE) is a useful tool for analyzing, establishing and managing soil erosion. RUSLE has been widely used to estimate annual averages of soil loss, by both interrill and rill erosion, worldwide. Therefore, the aim of this work was to estimate the soil loss in the watershed stream Indaiá, using the RUSLE model and geoprocessing techniques. To estimate soil loss, the following factors were spatialized: erosivity (R), erodibility (K), topography (LS), land-use and management (C) and conservation practices (P); the annual soil loss values were calculated using the RUSLE model equation. The estimated value of soil loss in the hydrographic basin ranged from 0 to 4082.16 Mg ha^?1 year^?1 and had an average value of 47.81 Mg ha^?1 year^?1. These results have demonstrated that 68.16 % of the study area showed little or no soil loss based on the Food and Agriculture Organization’s (FAO 1980) classification. When comparing the average value of soil loss obtained using the RUSLE model with the Natural Potential for Erosion, a 16-fold reduction in soil was found, which highlighted the fact that vegetation cover (C factor) has a greater influence than other factors (R, K and LS) on soil loss prediction attenuation. These results lead to the conclusion that soil loss occurs by different methods in each settlement in the basin and that erosive processes modeled by geoprocessing have the potential to contribute to an orderly land management process.     

Estimation of Durability Aspects of Al Masjid Al-Haram Marble,Makkah City,Saudi Arabia

The durability is a measure of the rock’s ability to resist degradation during its working life. Rock durability is greatly related to the mineralogical composition of rocks, rock texture (crystal interlocking, crystal shape and size), and the nature of fluids that are in contact with rock. Marbles have been among the most important building materials since ancient times. The main aim of this study is to evaluate the durability of Al Masjid Al-Haram marble and Ordinary white marble “Carrara” (M₁ and M₂) and develop some correlations among the physical and mechanical properties such as P-wave velocity, slake durability index, dry uniaxial compressive strength (UCS_Dry), abrasion resistance, point load index, impact strength index, Brazilian tensile strength, and Shore hardness. After testing and the evaluation of the test results, strong statistical correlations were found between P-wave velocity and other rock properties. Statistical correlations between the UCS_Dry other tests were also carried out. The coefficients of regressions (R²) range from 0.6177 to 0.997. The study shows that the UCS_Dry values of M1 and M2 have positive relationship with P wave velocities. Concluding remark is that the rocks tested in the study have good durability characteristics and can be reliably used for construction projects. On the other hand, the derived empirical equations can be used for the estimation purposes for similar rock types.     

Evaluating the Performance of Using PPK-GPS Technique in Producing Topographic Contour Map

The Global Positioning System (GPS) is considered as one of the most powerful tools that are used in geodetic works. It is increasingly considered as an alternative tool for conventional surveying techniques. The goal of this research paper is to produce a methodology for generating topographic contour maps using the post-processed kinematic differential GPS technique (PPK-GPS). The performance of this technique is assessed by comparing it with the traditional spirit-leveling technique taking into consideration the accuracy, time, and cost. The study area is located along the Mediterranean coast in the Rosetta area of the middle Delta in Egypt with a total area of about 39 km². The field work includes 14 control points and about 50,000 PPK observations. In addition, 20 check cross sections that extend along the coastal line from Rosetta to El Burullus cities were observed using both spirit-leveling and GPS-PPK techniques. The results of the comparison indicate that the PPK-GPS technique can be used instead of spirit leveling in producing a topographic contour map with an accuracy of about 20 cm in orthometric height. We find that the PPK-GPS technique reduces the estimated time of leveling works in our study area by about 70%.     

Distribution,abundance and population structure of Hexaplex trunculus and Bolinus brandaris (Gastropoda: Muricidae) in offshore areas of the Gulf of Gabès,southern Tunisia

The banded murex Hexaplex trunculus and purple dye murex Bolinus brandaris are frequently caught as bycatch by bottom trawlers operating in the Gulf of Gabès, southern Tunisia. Although these muricid gastropods might importantly constitute an additional source of income for fishermen as well as help to diversify local shellfish production, information on their catches is relatively scarce. Hence, the present study aimed to assess the status of local populations of H. trunculus and B. brandaris, including data on their spatial and depth distributions, abundance, biomass, population structure and mortality. Fishing surveys using bottom trawls were performed between May 2006 and June 2007 in offshore areas of the Gulf of Gabès. In total, 198 fishing hauls were analysed, corresponding to a total fishing duration of 333.3 hours and a total prospecting area of 1 534 ha at depths of 20–86 m. Altogether, 3 026 H. trunculus and 3 599 B. brandaris of a broad size range (22.9?91.1 and 22.4?97.0 mm shell length, respectively) were sampled during the study period. GIS-produced maps were employed to determine the species’ spatial and bathymetric distributions by extrapolating their estimated fishing yield (bycatch per unit effort), abundance, biomass and mortality in relation to the total area surveyed in the gulf. The results provide valuable baseline information that may be applied to management proposals for regulating this untargeted resource, ultimately assisting sustainable exploitation and long-term preservation of this alternative fishing resource in the offshore areas of the Gulf of Gabès.     

Basis of a formal language for facilitating communication among climate modelers

The objective of this work is to present the basis for a formal language that aims to express in a concise way some fundamental beliefs held within the climate research community. The expression of this set of beliefs takes the form of relations, conjectures or propositions that describe characteristics of different aspects of climate modeling. Examples are constructed using topics that are much discussed within the climate modeling community. The article first introduces, as elements of this formal language, models considered a priori (the model as a code or algorithm) or a posteriori (the model as output), and then presents different relations between these elements. The most important relation is that of dominance, which helps to define the superiority of one model over another based on which model a rational agent will choose. Various kinds of dominance are considered. Also presented in a formal language are propositions and conjectures relating to model development, model calibration and climate change ensemble projections, each of which are held with diverse levels of acceptance within the climate modeling community. In addition, the relevance of defining elements—models—whose existence is improbable, such as bug-free model versions, is discussed. Although the potential value of this language is shown, there remains a need to improve the definitions presented here, as some of them remain unsatisfying. Still, we believe that this attempt may help us not only communicate more clearly but also to better distinguish different schools of thought that currently exist within the community.     

Genesis of sediment-hosted stratiform copper–cobalt mineralization at Luiswishi and Kamoto, Katanga Copperbelt (Democratic Republic of Congo)

The sediment-hosted stratiform Cu–Co mineralization of the Luiswishi and Kamoto deposits in the Katangan Copperbelt is hosted by the Neoproterozoic Mines Subgroup. Two main hypogene Cu–Co sulfide mineralization stages and associated gangue minerals (dolomite and quartz) are distinguished. The first is an early diagenetic, typical stratiform mineralization with fine-grained minerals, whereas the second is a multistage syn-orogenic stratiform to stratabound mineralization with coarse-grained minerals. For both stages, the main hypogene Cu–Co sulfide minerals are chalcopyrite, bornite, carrollite, and chalcocite. These minerals are in many places replaced by supergene sulfides (e.g., digenite and covellite), especially near the surface, and are completely oxidized in the weathered superficial zone and in surface outcrops, with malachite, heterogenite, chrysocolla, and azurite as the main oxidation products. The hypogene sulfides of the first Cu–Co stage display δ³⁴S values (−10.3‰ to +3.1‰ Vienna Canyon Diablo Troilite (V-CDT)), which partly overlap with the δ³⁴S signature of framboidal pyrites (−28.7‰ to 4.2‰ V-CDT) and have ∆³⁴S_SO4-Sulfides in the range of 14.4‰ to 27.8‰. This fractionation is consistent with bacterial sulfate reduction (BSR). The hypogene sulfides of the second Cu–Co stage display δ³⁴S signatures that are either similar (−13.1‰ to +5.2‰ V-CDT) to the δ³⁴S values of the sulfides of the first Cu–Co stage or comparable (+18.6‰ to +21.0‰ V-CDT) to the δ³⁴S of Neoproterozoic seawater. This indicates that the sulfides of the second stage obtained their sulfur by both remobilization from early diagenetic sulfides and from thermochemical sulfate reduction (TSR). The carbon (−9.9‰ to −1.4‰ Vienna Pee Dee Belemnite (V-PDB)) and oxygen (−14.3‰ to −7.7‰ V-PDB) isotope signatures of dolomites associated with the first Cu–Co stage are in agreement with the interpretation that these dolomites are by-products of BSR. The carbon (−8.6‰ to +0.3‰ V-PDB) and oxygen (−24.0‰ to −10.3‰ V-PDB) isotope signatures of dolomites associated with the second Cu–Co stage are mostly similar to the δ¹³C (−7.1‰ to +1.3‰ V-PDB) and δ¹⁸O (−14.5‰ to −7.2‰ V-PDB) of the host rock and of the dolomites of the first Cu–Co stage. This indicates that the dolomites of the second Cu–Co stage precipitated from a high-temperature, host rock-buffered fluid, possibly under the influence of TSR. The dolomites associated with the first Cu–Co stage are characterized by significantly radiogenic Sr isotope signatures (0.70987 to 0.73576) that show a good correspondence with the Sr isotope signatures of the granitic basement rocks at an age of ca. 816 Ma. This indicates that the mineralizing fluid of the first Cu–Co stage has most likely leached radiogenic Sr and Cu–Co metals by interaction with the underlying basement rocks and/or with arenitic sedimentary rocks derived from such a basement. In contrast, the Sr isotope signatures (0.70883 to 0.71215) of the dolomites associated with the second stage show a good correspondence with the ⁸⁷Sr/⁸⁶Sr ratios (0.70723 to 0.70927) of poorly mineralized/barren host rocks at ca. 590 Ma. This indicates that the fluid of the second Cu–Co stage was likely a remobilizing fluid that significantly interacted with the country rocks and possibly did not mobilize additional metals from the basement rocks.