Design and commissioning of a laminar soil container for use on small shaking tables

This paper describes the design, fabrication and commissioning of a single axis laminar shear box for use in seismic soil–structure interaction studies. A laminar shear box is a flexible container that can be placed on a shaking table to simulate vertical shear-wave propagation during earthquakes through a soil layer of finite thickness. The laminar shear box described in this paper was designed to overcome the base shear limitations of a small shaking table at The University of Western Ontario. The design details of the box are provided in addition to results of dynamic tests performed to commission the box. A synthetic clay comprising sodium bentonite mixed with diluted glycerin was used as the model soil and 1-G similitude theory was employed to maintain model to prototype similarity. The model soil was compacted into the container in lifts to achieve soil stiffness that increased with depth. A series of shaking table tests and numerical analyses that were performed to study the performance of the laminar box and non-linear seismic behavior of the model clay are described. The results of this study show that the laminar box does not impose significant boundary effects and is able to maintain 1-D soil column behavior. In addition, the dynamic behavior of the model clay during scaled model tests was found to be consistent with the behavior measured during cyclic laboratory tests.     

Efficient 3D nonlinear Winkler model for shallow foundations

This paper presents a new practical modeling approach, based on the beam-on-a-nonlinear Winkler foundation (BNWF) model, to simulate the 3D rocking, vertical and horizontal responses of shallow foundations using structural elements that are readily available in the element library of commercially available structural analysis programs. An assemblage of a moment-rotation hinge, shear hinge connected in series with an elastic frame member attached to the bottom end of ground story columns was proposed to model the response of the footing under combined action of vertical, horizontal and moment loading. To couple the responses of these hinges, two bounding surfaces equations were introduced and derived mathematically: a surface that defines the interaction between the rocking and vertical capacities of the footing along its width and length; and a surface that defines the interaction between the horizontal capacities of the footing along its width and length. Simple calculation steps to evaluate the geometric and mechanical properties of the proposed assemblage of structural elements are provided. The proposed modeling approach was verified using experimental results from large scale model foundations subjected to cyclic loading. Based on this study, it was found that the proposed assemblage can be reliably used in modeling the rocking and horizontal responses of shallow foundations under cyclic loading.     

Modeling of limestone aquifer in the western part of the River Nile between Beni Suef and El Minia

A robust classification scheme for partitioning groundwater chemistry into homogeneous groups was an important tool for the characterization of Eocene limestone aquifer. The aquifer locally is composed of chalky limestone with thin clay intercalated (Samalut Fm.), the fissures, the joints, and the fractures are represented the conduits of the aquifer system. The flow patterns are conditioned by karstification processes which develop a conduit network and preserve low permeability microfractured blocks. The aquifer is mainly recharged by surrounding aquifers and agricultural wastewaters. The groundwater flows in the eastern part (due the Bahr Yossef and River Nile), which is a discharge area rather than a recharge. Twenty-eight groundwater samples was collected from the Eocene limestone aquifer and analyzed for isotopes, major, and trace elements. δD and δ¹⁸O concentrations ranged widely due to geology, infiltration of different surface waters, evaporation, and hydrogeology. The concentration of δD and δ¹⁸O isotopes is depleted in the northern zone of the northern part and western zone of the central and southern part of the study area. They are enriched due the eastern area of the central and southern part of the study area. δD vs. δ¹⁸O delineate the Pleistocene aquifer and has a strong influence than other waters on aquifer hydrogeochemistry. It is confirmed by the AquaChem outputs of the mixing proportions of different water types included in the aquifer system. Cl-δD and Cl-δ¹⁸O relationships indicate the role of evaporation especially due the eastern area of the central and southern part of the study area. This research tests the performance of the many available graphical and statistical methodologies used to classify water samples. R-mode clustering, correlation analysis, and principal component analysis were investigated. All the methods were discussed and compared as to their ability to cluster, ease of use, and ease of interpretation. Nearly most low-salinity waters are in equilibrium to supersaturate with respect to both carbonate minerals, while it is shifted to undersaturate with salinity. The inverse modeling findings clarify that the calcite, gypsum, and anhydrite dissolution increased due the northeastern area, middle zone, and southern corner of the northern, central, and southern part of the study area, respectively. The latter areas also were characterized by the lowest precipitation of the dolomite. Such areas are distinguished by much more enhancement for aquifer permeability and therefore transmissivity. The latter areas can be use as injection zone by fresh water. It can be a triple function; firstly, it recharges the saline Eocene limestone aquifer through the enhancement hydraulic conductivity and dilutes it. Secondly, it enhances much more the aquifer permeability and therefore the transmissivity. The Eocene limestone aquifer can be improved in quality and quantity by using such a model and exploits it as an alternative water resource with Quaternary aquifer and Nile water. Thirdly, it irrigates more areas to increase the income/capita. The dedolomitization represents the main hydrogeochemical process in the aquifer system. The geomedia (limestone, clay, marl, shale, and sand deposits) are in contact with water, therefore, the rock/water interaction, mixing, and ion exchange were estimated by the geochemical evolution of the groundwater systems.     

De nouveaux éléments structuraux du complexe aquifère profond du bassin du Rharb (Maroc) : implications hydrogéologiques

The Rharb basin is located in northwestern Morocco. It is a part of one of the most important hydrogeological basins of Morocco, and extends over some 4000 km². The nature of its Plio-Quaternary sedimentary fill and its structural and palaeoenvironmental contexts are reflected by great variations in aerial and temporal facies distribution. This distribution, in turn, is a direct cause of the observed complexity in the geometry of potentially water-bearing beds. In the present work, we present an image of potential new hydrogeological reservoirs and define new structures that partially explain their architecture. To cite this article: M. Kili et al., C. R. Geoscience 338 (2006).     

Application of data assimilation for improving forecast of water levels and residual currents in Singapore regional waters

Hydrodynamic models are commonly used for predicting water levels and currents in the deep ocean, ocean margins and shelf seas. Their accuracy is typically limited by factors, such as the complexity of the coastal geometry and bathymetry, plus the uncertainty in the flow forcing (deep ocean tide, winds and pressure). In Southeast Asian waters with its strongly hydrodynamic characteristics, the lack of detailed marine observations (bathymetry and tides) for model validation is an additional factor limiting flow representation. This paper deals with the application of ensemble Kalman filter (EnKF)-based data assimilation with the purpose of improving the deterministic model forecast. The efficacy of the EnKF is analysed via a twin experiment conducted with the 2D barotropic Singapore regional model. The results show that the applied data assimilation can improve the forecasts significantly in this complex flow regime.     

Ecohydrographic constraints on biodiversity and distribution of phytoplankton and zooplankton in coral reefs of the Red Sea,Saudi Arabia

An integral concept of ecological research is the constraint of biodiversity along latitudinal and environmental gradients. The Red Sea features a natural example of a latitudinal gradient of salinity, temperature and nutrient richness. Coral reefs along the Red Sea coasts are supported with allochthonous resources such as oceanic and neritic phytoplankton and zooplankton; however, relatively little is known about how the ecohydrography correlates with plankton biodiversity and abundance. In this article we present the biodiversity of phytoplankton and zooplankton in Red Sea coral reefs. Oceanographic data (temperature, salinity), water samples for nutrient analysis, particulate organic matter, phytoplankton and zooplankton, the latter with special reference to Copepoda (Crustacea), were collected at nine coral reefs over ~1500 km distance along the Red Sea coast of Saudi Arabia. The trophic state of ambient waters [as indicated by chlorophyll a (Chl a)] changed from strong oligotrophy in the north to mesotrophy in the south and was associated with increasing biomasses of Bacillariophyceae, picoeukaryotes and Synechococcus as indicated by pigment fingerprinting (CHEMTAX) and flow cytometry. Net‐phytoplankton microscopy revealed a Trichodesmium erythraeum (Cyanobacteria) bloom north of the Farasan Islands. Several potentially harmful algae, including Dinophysis miles and Gonyaulax spinifera (Dinophyceae), were encountered in larger numbers in the vicinity of the aquaculture facilities at Al Lith. Changes in zooplankton abundance were mainly correlated to the phytoplankton biomass following the latitudinal gradient. The largest zooplankton abundance was observed at the Farasan Archipelago, despite high abundances of copepodites, veligers (Gastropoda larvae) and Chaetognatha at Al Lith. Although the community composition changed over latitude, biodiversity indices of phytoplankton and zooplankton did not exhibit a systematic pattern. As this study constitutes the first current account of the plankton biodiversity in Red Sea coral reefs at a large spatial scale, the results will be informative for ecosystem‐based management along the coastline of Saudi Arabia.     

Evaluating the Ability of CRCM5 to Simulate Mixed Precipitation

Precipitation episodes in the form of freezing rain and ice pellets represent natural hazards affecting eastern Canada during the cold season. These types of precipitation mainly occur in the St. Lawrence River valley and the Atlantic provinces of Canada. This study aims to evaluate the ability of the fifth-generation Canadian Regional Climate Model (CRCM5), using a 0.11° horizontal grid mesh, to hindcast mixed precipitation when driven by reanalyses produced by the European Centre for Medium-range Weather Forecasts (ERA-Interim) for a 35-year period. In general, the CRCM5 simulation slightly overestimates the occurrence of freezing rain, but the geographical distribution is well reproduced. The duration of freezing rain events and accompanying surface winds in the Montréal region are reproduced by CRCM5. A case study is performed for an especially catastrophic freezing-rain event in January 1998; the model succeeds in simulating the intensity and duration of the episode, as well as the propitious meteorological environment. Overall, the model is also able to reproduce the climatology and a specific event of freezing rain and ice pellets.     

Relationships between climatic factors and flower and boll production in Egyptian cotton (Gossypium barbadense)

Fruiting of cotton plant is determined and influenced by cultivar, climatic conditions, management practices and pests. An understanding of the flowering and boll retention patterns of cotton cultivars can contribute to more efficient and economical crop management. The objective of this investigation was to study the effect of various climatic factors on flower and boll production of Egyptian cotton. This could be used in formulating advanced predictions of the effect of certain climatic conditions on the production of Egyptian cotton. Two uniform field trials, using cotton Gossypium barbadense cv. Giza 75 were carried out in 1992 and 1993 at the Agricultural Research Station, Agricultural Research Center, Ministry of Agriculture, Giza, Egypt, to investigate the relationships between climatic factors, flower and boll production. Climatic factors included maximum and minimum air temperatures along with their difference, evaporation, surface soil temperature (grass temperature or green cover temperature) at 0600 and 1800 h°C⁻¹, sunshine duration, maximum and minimum humidity and wind speed. The effects of climatic factors on flower and boll production were quantified in the absence of water and nutritional deficits and damage effects of insects. Results obtained indicate that evaporation, sunshine duration, humidity, surface soil temperature at 1800 h, and maximum air temperature, were the important climatic factors that significantly affect flower and boll production of Egyptian cotton. Consequently, applying appropriate specific cultural practices that minimize the deleterious effect of these factors will lead to an improvement in cotton yield.