Discovery of the causeway and the mortuary temple of the Pyramid of Amenemhat II using near‐surface magnetic investigation,Dahshour, Giza,Egypt

The main outbuildings of the Amenemhat II pyramid complex in Dahsour were yet to be discovered due to a very long subjection of the area to the military authorities and also the demolition of the pyramid itself. We describe the discovery of some of these outbuildings using near‐surface magnetic investigations. A gradiometer survey was conducted in the area east of the pyramid to measure the vertical magnetic gradient with a high resolution instrument at 0.5 m sampling interval. The data showed some undesirable field effects such as grid discontinuities, grid slope, traverse stripe effects, spikes and high frequencies originating from recent ferrous contamination. These undesirable effects were addressed to produce an enhanced display. We have successfully detected four main structures in the area east of the pyramid; the causeway that connected the mortuary temple with the valley temple during the Middle Kingdom of the 12^th Dynasty, the mortuary temple and its associated rooms, ruins of an ancient working area and an Egyptian‐style tomb structure called a Mastaba. An improved recognition for these structures was accomplished by using the analytic signal and Euler deconvolution techniques. Excavation of a small part within the study area has proven the reliability of magnetic discoveries and the shallowness and composition of the detected features.     

Mixed estimation methods for Halphen distributions with applications in extreme hydrologic events

The Halphen family of distributions is a flexible and complete system to fit sets of observations independent and identically distributed. Recently, it is shown that this family of distributions represents a potential alternative to the generalized extreme value distributions to model extreme hydrological events. The existence of jointly sufficient statistics for parameter estimation leads to optimality of the method of maximum likelihood (ML). Nevertheless, the ML method requires numerical approximations leading to less accurate values. However, estimators by the method of moments (MM) are explicit and their computation is fast. Even though MM method leads to good results, it is not optimal. In order to combine the advantages of the ML (optimality) and MM (efficiency and fast computations), two new mixed methods were proposed in this paper. One of the two methods is direct and the other is iterative, denoted respectively direct mixed method (MMD) and iterative mixed method (MMI). An overall comparison of the four estimation methods (MM, ML, MMD and MMI) was performed using Monte Carlo simulations regarding the three Halphen distributions. Generally, the MMI method can be considered for the three Halphen distributions since it is recommended for a majority of cases encountered in hydrology. The principal idea of the mixed methods MMD and MMI could be generalized for other distributions with complicated density functions.     

Pan-African high-grade metamorphism of southern Sinai,Egypt, fluid inclusion evidence

Fluid inclusions in the leucosomes of Wadi Feiran migmatites showed that CO ₂ , H₂O and (H₂O-CO₂) fluids were likely to have been present when partial melting began in these rocks. Low salinity, aqueous fluid, to a lesser extent, CO₂-rich fluids are the most abundant fluids. The present study suggests that high-density CO₂ inclusions were formed at the earliest stage, while H₂O inclusions were formed at the late stage. In an intermediate stage, low-density CO₂ and H₂O, CO₂ inclusions were formed. At the early stage of uplift and during melt crystallization, the CO₂-bearing vapour was trapped at grain boundaries. At the late stage of uplift, H₂O released at the time of crystallization of the melt was trapped as inclusions.     

A constant key length coding scheme for linear quadtrees

ABSTRACT

Although the linear quadtree is popular in both image processing and GIS, most linear quadtree coding methods need in representation a bit length that is proportional to the resolution of images; the proportionality factor is replaced with a constant bit length that induces a more compact linear quadtree. We propose a linear quadtree coding scheme named constant key length quadtree coding (CKQC) that has advantages of easy implementation and decreased memory requirements. The proposed CKQC scheme is developed on the bases of node classification, order of traversal with breadth first and the Morton sequence. The major characteristic is to apply a constant bit length to construct quaternary codes. The bit length of each quaternary code is constant, either four or eight bits, no matter what the resolution of a raster image. In terms of memory space required and duration complexities, the overall performance is analyzed and compared with other methods to demonstrate the superiority of the proposed CKQC scheme. Several experimental results validate the applicability of the proposed scheme.     

Polybrominated diphenyl ethers and their methoxylated analogs in mullet (Mugil cephalus) and sea bass (Dicentrarchus labrax) from Bizerte Lagoon, Tunisia

Concentrations of ten polybrominated diphenyl ethers (PBDEs) and eight methoxylated polybrominated diphenyl ethers (MeO-PBDEs) in mullet (Mugil cephalus) and sea bass (Dicentrarchus labrax) collected from the Bizerte Lagoon and the Mediterranean Sea were investigated. To the best of our knowledge, this is the first report of these compounds in marine fishes from Tunisia. The PBDE mean concentrations in fish from Bizerte Lagoon were 45.3 and 96.2 ng g(-1) lw respectively in mullet and sea bass, while the concentrations of these compounds in mullet and sea bass from Mediterranean Sea were 7.80 and 27.9 ng g(-1) lw respectively. MeO-PBDE concentrations in mullet and sea bass from Bizerte Lagoon ranged from 6.46 to 286 ng g(-1) lw and from 49.4 to 798 ng g(-1) lw respectively, while the concentrations of these compounds in mullet and sea bass from Mediterranean Sea ranged from 190 to 401 ng g(-1) lw and from 353 to 578 ng g(-1) lw respectively. The total PBDEs and total MeO-PBDEs concentration in fish from Bizerte Lagoon were similar or slightly lower than those reported for other species from other locations around the world.     

Wrench structural deformation in Ras Al Hilal-Al Athrun area, NE Libya: a new contribution in Northern Al Jabal Al Akhdar Belt

Al Jabal Al Akhdar is a NE/SW- to ENE/WSW-trending mobile part in Northern Cyrenaica province and is considered a large sedimentary belt in northeast Libya. Ras Al Hilal-Al Athrun area is situated in the northern part of this belt and is covered by Upper Cretaceous–Tertiary sedimentary successions with small outcrops of Quaternary deposits. Unmappable and very restricted thin layers of Palaeocene rocks are also encountered, but still under debate whether they are formed in situ or represent allochthonous remnants of Palaeocene age. The Upper Cretaceous rocks form low-lying to unmappable exposures and occupy the core of a major WSW-plunging anticline. To the west, south, and southeast, they are flanked by high-relief Eocene, Oligocene, and Lower Miocene rocks. Detailed structural analyses indicated structural inversion during Late Cretaceous–Miocene times in response to a right lateral compressional shear. The structural pattern is themed by the development of an E–W major shear zone that confines inside a system of wrench tectonics proceeded elsewhere by transpression. The deformation within this system revealed three phases of consistent ductile and brittle structures (D₁, D₂, and D₃) conformable with three main tectonic stages during Late Cretaceous, Eocene, and Oligocene–Early Miocene times. Quaternary deposits, however, showed at a local scale some of brittle structures accommodated with such deformation and thus reflect the continuity of wrenching post-the Miocene. D₁ deformation is manifested, in Late Cretaceous, via pure wrenching to convergent wrenching and formation of common E- to ENE-plunging folds. These folds are minor, tight, overturned, upright, and recumbent. They are accompanied with WNW–ESE to E–W dextral and N–S sinistral strike-slip faults, reverse to thrust faults and pop-up or flower structures. D₂ deformation initiated at the end of Lutetian (Middle Eocene) by wrenching and elsewhere transpression then enhanced by the development of minor ENE–WSW to E–W asymmetric, close, and, rarely, recumbent folds as well as rejuvenation of the Late Cretaceous strike-slip faults and formation of minor NNW–SSE normal faults. At the end of Eocene, D₂ led to localization of the movement within E–W major shear zone, formation of the early stage of the WSW-plunging Ras Al Hilal major anticline, preservation of the contemporaneity (at a major scale) between the synthetic WNW–ESE to E–W and ENE–WSW strike-slip faults and antithetic N–S strike-slip faults, and continuity of the NW–SE normal faults. D₃ deformation is continued, during the Oligocene-Early Miocene, with the appearance of a spectacular feature of the major anticline and reactivation along the E–W shear zone and the preexisting faults. Estimating stress directions assumed an acted principal horizontal stress from the NNW (N33°W) direction.     

Source parameters of some recent earthquakes in the Gulf of Aqaba, Egypt

Gulf of Aqaba is recognized as an active seismic zone where many destructive earthquakes have occurred. The estimation of source parameters and coda Q attenuation are the main target of this work. Fifty digital seismic events in eight short-period seismic stations with magnitude 2.5–5.2 are used. Most of these events occurred at hypocentral depths in the range of 7–20 km, indicating that the activity was restricted in the upper crust. Seismic moment, M _o, source radius, r, and stress drop, Δσ, are estimated from P- and S-wave spectra using the Brune’s seismic source model. The average seismic moment generated by the whole sequence of events was estimated to be 4.6E?+?22 dyne/cm. The earthquakes with higher stress drop occur at 10-km depth. The scaling relation between the seismic moment and the stress drop indicates a tendency of increasing seismic moment with stress drop. The seismic moment increases with increasing the source radius. Coda waves are sensitive to changes in the subsurface due to the wide scattering effects generating these waves. Single scattering model of local earthquakes is used to the coda Q calculation. The coda with lapse times 10, 20, and 30 s at six central frequencies 1.5, 3, 6, 12, 18, 24 Hz are calculated. The Q _c values are frequency dependent in the range 1–25 Hz, and are approximated by a least squares fit to the power law [ $ {Q_c}(f) = {Q_o}{(f/{f_o})^\eta } $ ]. The average of Q _c values increases from 53?±?10 at 1.5 Hz to 700?±?120 at 24 Hz. The average of Q _o values ranges from 13?±?1 at 1.5 Hz to 39?±?4 at 24 Hz. The frequency exponent parameter η ranges between 1.3?±?0.008 and 0.9?±?0.001.     

Modeling hydrologic responses of the Zwalm catchment using the REW approach: propagation of uncertainty in soil properties to model output

The research presented in this paper focuses on the application of a newly developed physically based watershed modeling approach, which is called representative elementary watershed approach. The study stressed the effects of uncertainty of input parameters on the watershed responses (i.e., simulated discharges). The approach was applied to the Zwalm catchment, which is an agriculture-dominated watershed with a drainage area of 114 km² located in East Flanders, Belgium. Uncertainty analysis of the model parameters is limited to the saturated hydraulic conductivity because of its high influence on the watershed hydrologic behavior and availability of the data. The assessment of output uncertainty is performed using the Monte Carlo method. The ensemble statistical watershed responses and their uncertainties are calculated and compared with measurements. The results show that the measured discharges fall within the 95% confidence interval of the modeled discharge. This provides the uncertainty bounds of the discharges that account for the uncertainty in saturated hydraulic conductivity. The methodology can be extended to address other uncertain parameters as far as the probability density function of the parameter is defined.     

Recent evolution of Lake Arreo,northern Spain: influences of land use change and climate

We present a high-resolution, multiproxy reconstruction of the depositional history of Lake Arreo, northern Spain, for the last 60 years. We conducted sedimentological, geochemical and diatom analyses in short cores and made a detailed comparison with regional instrumental climate data (1952–2007), limnological monitoring of the lake (1992–2008) and recent land use changes that affect the lake catchment. Chronology is based on “floating” discontinuous varve counts and ¹³⁷Cs and ¹⁴C dates. Four periods were identified in the Lake Arreo recent history: (1) prior to 1963, varved facies intercalated with fine turbidite deposits, and diatom assemblages dominated by Cyclotella taxa indicate predominantly meromictic conditions, (2) from 1964 to 1978, permanent anoxia persisted in bottom waters, as shown by similar facies and diatom assemblages as before, though detrital layers were coarser, (3) from 1979 to 1994, sediment delivery to the lake increased and laminated, clastic facies were deposited, and (4) from 1995 to 2008, dominance of massive facies and an increase in Fragilaria tenera and Achnanthes minutissima reflect relatively lower lake levels, less frequent bottom anoxia with more frequent water column mixing, similar to modern conditions. The period 1952–1979 was a time of meromixis and varved facies deposition, and was characterized by higher rainfall and less intense agricultural pressure in the watershed. There were two short humid periods (1992–1993 and 1996–1998) when monitoring data show more anoxic weeks per year and relatively higher lake levels. Increased cultivation of small landholdings in 1963, and particularly after 1979, caused a large increase in sediment delivery to the lake. The inferred lake evolution is in agreement with monitoring data that suggest a transition from dominantly meromictic conditions prior to 1993–1994 to a predominantly monomictic pattern of circulation since then, particularly after 2000. The synergistic effects of intensive water extraction for irrigation and lower rainfall since 1979, and particularly since 1994, brought the long period of meromictic conditions in Lake Arreo to an end. Water balance and sediment delivery to the lake are dominant factors that control the limnological and mixing conditions in Lake Arreo and they must be considered in management and restoration plans.