Spatial distribution of the apatite fission‐track ages in the Toki granite,central Japan: Exhumation rate of a Cretaceous pluton emplaced in the East Asian continental margin

The Cretaceous Toki granitic pluton of the Tono district, central Japan was emplaced in the East Asian continental margin at about 70 Ma. The Toki granite has apatite fission‐track (AFT) ages ranging from 52.1 ±2.8 Ma to 37.1 ±3.6 Ma (number of measurements, n = 33); this indicates the three‐dimensional thermal evolution during the pluton's low‐temperature history (temperature in the AFT partial annealing zone: 60–120 °C). The majority of the Toki granite has a spatial distribution of older ages in the shallower parts and younger ages in the deeper parts, representing that the shallower regions arrived (were exhumed) at the AFT closure depth earlier than the deeper regions. Such a cooling pattern was predominantly constrained by the exhumation of the Toki granitic pluton and was related to the regional denudation of the Tono district. The age–elevation relationships (AERs) of the Toki granite indicate a fast exhumation rate of about 0.16 ±0.04 mm/year between 50 Ma and 40 Ma. The AFT inverse calculation using HeFTy program gives time‐temperature paths (t–T paths), suggesting that the pluton experienced continuous slow cooling without massive reheating since about 40 Ma until the present day. A combination of the AERs and AFT inverse calculations represents the following exhumation history of the Toki granite: (i) the fast exhumation at a rate of 0.16 ±0.04 mm/year between 50 Ma and 40 Ma; (ii) slow exhumation at less than 0.16 ±0.04 mm/year after 40 Ma; and (iii) exposure at the surface prior to 30–20 Ma. The Tono district, which contains the Toki granite, underwent slow denudation at a rate of less than 0.16 ±0.04 mm/year within the East Asian continental margin before the Japan Sea opening at 25–15 Ma and then within the Southwest Japan Arc after the Japan Sea opening, which is in good agreement with representative denudation rates obtained in low‐relief hill and plain fields.     

A three-dimensional numerical study of river plume mixing processes in Otsuchi Bay,Japan

The three-dimensional numerical model SUNTANS is applied to investigate river plume mixing in Otsuchi Bay, an estuary located along the Sanriku Coast of Iwate, Japan. Results from numerical simulations with different idealized forcing scenarios (barotropic tide, baroclinic tide, and diurnal wind) are compared with field observations to diagnose dominant mixing mechanisms. Under the influence of combined barotropic, baroclinic and wind forcing, the model reproduces observed salinity profiles well and achieves a skill score of 0.94. In addition, the model forced by baroclinic internal tides reproduces observed cold-water intrusions in the bay, and barotropic tidal forcing reproduces observed salt wedge dynamics near the river mouths. Near these river mouths, vertically sheared flows are generated due to the interaction of river discharge and tidal elevations. River plume mixing is quantified using vertical salt flux and reveals that mixing near the vicinity of the river mouth, is primarily generated by the barotropic tidal forcing. A 10 ms^?1 strong diurnal breeze compared to a 5 ms^?1 weak breeze generates higher mixing in the bay. In contrast to the barotropic forcing, internal tidal (baroclinic) effects are the dominant mixing mechanisms away from the river mouths, particularly in the middle of the bay, where a narrow channel strengthens the flow speed. The mixing structure is horizontally asymmetric, with the middle and northern parts exhibiting stronger mixing than the southern part of the bay. This study identifies several mixing hot-spots within the bay and is of great importance for the coastal aquaculture system.     

A Study of Correlations of Scalar Quantities in the Atmospheric Surface Layer

Standard deviations for vertical velocity and scalar quantities, such as temperature, T, and specific humidity, q, were analyzed on the basis of Monin-Obukhov (M-O) similarity theory in the atmospheric surface layer. The correlation coefficient between scalar quantities T and q, R_Tq, was derived from the similarity functions and can be expressed as the ratio of B_T/B_q (B_T≤ B_q), where parameter B is the value of the normalized standard deviation of any scalar quantity at neutral conditions.     

Gold-bearing Quartz Veins and Hydrothermal Alteration of the Paleozoic Epithermal System in the Francis Creek Area, North Queensland, Australia

Abstract. The Francis Creek area located at the Sybil graben in North Queensland, Australia, has some features of epithermal gold mineralization such as gold-bearing quartz vein and silica body hosted in rhyodacitic rocks of the Late Carboniferous Hells Gate Formation. In order to understand the nature of the paleo-hydrothermal activity in this area and to aid exploration for an economic gold deposit in this area, we carried out hydrothermal alteration mapping surrounding the veins and silica body, over an area of about 7 times 5 km².
We defined two alteration zones and inferred the center of hydrothermal activity. Fluid inclusion shows the boiling feature, and the microthermometry analysis resulted in the trapping temperature of 240°C and low salinity. This temperature is consistent with the formation temperature of clay mineral in the host rocks. On the basis of whole-rock composition, the silica body was identified as silicified rocks. Precious metal minerals such as electrum and acanthite coexist with sulfide minerals. Iodagylite was identified as a product of weathering. The sulfide minerals imply that the low-sulfidation epithermal gold mineralization occurred in the Francis Creek area.     

日本岛根县石见银矿区英安质火山岩中的黑云母矿物学特征及其K-Ar和40Ar-39Ar年代学研究

以显微镜、X射线衍射仪和电子探针等方法,对日本岛根县石见银矿区所产英安质火山岩中的黑云母进行了详细的研究．观察到部分黑云母经受了不同程度的热液蚀变作用。根据对未蚀变、或仅受到轻微蚀变作用的黑云母所进行的^40Ar-^39Ar同位素年龄测定,它们主要为第四纪产物。但是,从经受强热液蚀变作用的黑云母所获得的^40Ar-^39Ar同位素结果表明,后期的高温热液活动可以破坏晶体中的原始K—Ar同位素平衡,使得其。^40Ar-^39Ar同位素年龄与高于从未蚀变矿物所获得的结果,从而产生严重的年代失真。所以,对来自热液蚀变带的样品需要进行详细的矿物学研究。估计对黑云母的原始KAr同位素体系产生破坏的热扰动临界温度可能在200℃左右。     

Assessment of digital camera-derived vegetation indices in quantitative monitoring of seasonal rice growth

A commercially available digital camera can be used in a low-cost automatic observation system for monitoring crop growth change in open-air fields. We developed a prototype Crop Phenology Recording System (CPRS) for monitoring rice growth, but the ready-made waterproof cases that we used produced shadows on the images. After modifying the waterproof cases, we repeated the fixed-point camera observations to clarify questions regarding digital camera-derived vegetation indices (VIs), namely, the visible atmospherically resistant index (VARI) based on daytime normal color images (RGB image) and the nighttime relative brightness index (NRBI_NIR) based on nighttime near infrared (NIR) images. We also took frequent measurements of agronomic data such as plant length, leaf area index (LAI), and aboveground dry matter weight to gain a detailed understanding of the temporal relationship between the VIs and the biophysical parameters of rice. In addition, we conducted another nighttime outdoor experiment to establish the link between NRBI_NIR and camera-to-object distance. The study produced the following findings. (1) The customized waterproof cases succeeded in preventing large shadows from being cast, especially on nighttime images, and it was confirmed that the brightness of the nighttime NIR images had spatial heterogeneity when a point light source (flashlight) was used, in contrast to the daytime RGB images. (2) The additional experiment using a forklift showed that both the ISO sensitivity and the calibrated digital number of the NIR (cDN_NIR) had significant effects on the sensitivity of NRBI_NIR to the camera-to-object distance. (3) Detailed measurements of a reproductive stem were collected to investigate the connection between the morphological feature change caused by the panicle sagging process and the downtrend in NRBI_NIR during the reproductive stages. However, these agronomic data were not completely in accord with NRBI_NIR in terms of the temporal pattern. (4) The time-series data for the LAI, plant length, and aboveground dry matter weight could be well approximated by a sigmoid curve based on NRBI_NIR and VARI. The results confirmed that NRBI_NIR was more sensitive to all of the agronomic data for overall season, including the early reproductive stages. VARI had an especially high correlation with LAI, unless yellow panicles appeared in the field of view.     

Full‐scale shaking table test for examination of safety and functionality of base‐isolated medical facilities

A series of full‐scale shaking table tests are conducted using the E‐Defense shaking table facility on a base‐isolated four‐story RC hospital structure. A variety of furniture items, medical appliances, and service utilities are placed on the hospital specimen in as realistic a manner as possible. Four ground motions are adopted, including recorded near‐fault ground motions and synthesized long‐period, long‐duration ground motions. The test results show that the base‐isolated system performed very effectively against near‐fault ground motions due to significant reduction in the floor acceleration response, and operability and functionality of the hospital service is improved significantly as compared with the case observed for the corresponding base‐fixed system. Against the long‐period ground motion, however, the hospital service is difficult to maintain, primarily because of the significant motion of furniture items and medical appliances supported by casters. Resonance accentuated large displacements and velocities on the floors of the base‐isolated system, which causes such furniture items and medical appliances to slide, sometimes more than 3 m, resulting in occasional collision with other furnitures or against the surrounding partition walls. It is notable that a key to maintaining the function of the medical facilities is to securely lock the casters of furniture and medical appliances. Copyright © 2011 John Wiley & Sons, Ltd.     

Comparison of stable isotopes,ratios of Cl/Cl and I/I in brine and deep groundwater from the Pacific coastal region and the eastern margin of the Japan Sea

Fifty-three samples, including brines associated with oil and natural gas reservoirs and groundwater samples from deep boreholes, were collected from the Pacific and Japan Sea coastal regions in Japan. The ¹²⁹I/¹²⁷I and ³⁶Cl/Cl ratios, and stable isotopes (δD and δ¹⁸O) are compared to investigate differences related to the geotectonic settings of the two regions. The δD and δ¹⁸O data indicate that brine and groundwater from the Pacific coastal region reflect mixing of meteoric water with connate seawater in the pores of sedimentary rocks. On the other hand, brine and groundwater from the Japan Sea coastal region have been hydrothermally altered. In particular, brines associated with petroleum accumulations at Niigata and Akita showed the same isotopic characteristics as fluids found in the Kuroko deposits of the Green Tuff region in northeastern Japan. There is little difference in the ³⁶Cl/Cl ratios in brine and groundwater from the Pacific and Japan Sea coasts. Most brine and some deep groundwater, except those from the Pleistocene Kazusa Group, have already reached the average secular equilibrium ratio of 9.9 ± 2.7 × 10⁻¹⁵ for their mudstone and sandstone reservoirs. There was no correlation between the ³⁶Cl/Cl ratios and differences in geotectonic setting between the Pacific and the Japan Sea coast. The molar I/Br ratio suggests that the I in all of water samples was of biogenic origin. The average ¹²⁹I/¹²⁷I ratio was 290 ± 130 × 10⁻¹⁵ to 294 ± 105 × 10⁻¹⁵ in both regions, showing no relationship to the different geotectonic settings. The uncontaminated brine and groundwater samples are likely to have retained the original ¹²⁹I/¹²⁷I ratios of marine I released from the old organic matter stored in sedimentary rock.     

Fe–Mg partitioning between post-perovskite and ferropericlase in the lowermost mantle

Fe–Mg partitioning between post-perovskite and ferropericlase has been studied using a laser-heated diamond anvil cell at pressures up to 154 GPa and 2,010 K which corresponds to the conditions in the lowermost mantle. The composition of the phases in the recovered samples was determined using analytical transmission electron microscopy. Our results reveal that the Fe–Mg partition coefficient between post-perovskite and ferropericlase (K _D^PPv/Fp) increases with decreasing bulk iron content. The compositional dependence of K _D^PPv/Fp on the bulk iron content explains the inconsistency in previous studies, and the effect of the bulk iron content is the most dominant factor compared to other factors, such as temperature and aluminum content. Iron prefers ferropericlase compared to post-perovskite over a wide compositional range, whereas the iron content of post-perovskite (X _Fe^PPv, the mole fraction) does not exceed a value of 0.10. The iron-rich ferropericlase phase may have significant influence on the physical properties, such as the seismic velocity and electrical conductivity at the core–mantle boundary region.     

Measurements of carbon dioxide in the Seto Inland Sea of Japan

The carbon dioxide in seawater (pCO₂) was measured in the Seto Inland Sea of Japan using newly developed equilibrator instrument designed to be free from the correction for addition or extraction of the carbon dioxide from carrier gas. The temperature dependence of pCO₂ was about 4.5%pCO₂/°C for a single seawater sample which was processed as free from biological activity and change in total carbon dioxide content during an experiment. The decrease in pCO₂ during daylight hours due to the photosynthetic fixation was about 30% of the daily mean of pCO₂ during warm months and about 15% during cold months. The effect of carbon dioxide exchange between air and seawater on pCO₂ was about 0.6 ppm in August and about 0.1 ppm in March. This is negligible small compared with the daily oscillation of carbon dioxide in seawater.