Chemical mass balance in a reaction zone between serpentinite and metapelites in the Nishisonogi metamorphic rocks, Kyushu, Japan: Implications for devolatilization

Abstract   Reaction zones of 0.5–10.0 m thick are commonly observed between serpentinite and pelitic schist in the Nishisonogi metamorphic rocks, Kyushu, Japan. Each reaction zone consists of almost monomineralic or bimineralic layers of talc + carbonates, actinolite (or carbonates + quartz), chlorite, muscovite and albite from serpentinite to pelitic schist. Magnesite + quartz veins extend into the serpentinite from the talc + carbonates layer, while dolomite veins extend into the pelitic schist from the muscovite layer. These veins are filled by subhedral minerals with oriented growth features. Primary fluid inclusions yield the same homogenization temperatures (145–150°C) both in the reaction zone and in the veins, suggesting their simultaneous formation. Mass-balance calculations using the isocon method indicate that SiO₂, MgO, H₂O and K₂O are depleted in the reaction zone relative to the protoliths. These components were probably extracted from the reaction zone as fluids during the formation of the reaction zone.     

Effect of incorporation of iron and aluminum on the thermoelastic properties of magnesium silicate perovskite

In situ X-ray diffraction measurements of Fe- and Al-bearing MgSiO₃-rich perovskite (FeAl-Pv), which was synthesized from a natural orthopyroxene, were performed at pressures of 19–32 GPa and temperatures of 300–1,500 K using a combination of a Kawai-type apparatus with eight sintered-diamond anvils and synchrotron radiation. Two runs were performed using a high-pressure cell with two sample chambers, and both MgSiO₃ perovskite (Mg-Pv) and FeAl-Pv were synthesized simultaneously in the same cell. Thus we were able to measure specific volumes (V/V ₀) of Mg-Pv and FeAl-Pv at the same P−T conditions. At all the measurement conditions, values of the specific volume of FeAl-Pv are consistent with those of Mg-Pv within 2 Standard Deviation, strongly suggesting that effect of incorporation of iron and aluminum on the thermoelastic properties of magnesium silicate perovskite is undetectable in this composition, pressure, and temperature range. Two additional runs were performed using a high-pressure cell that has one sample chamber and unit-cell volumes of FeAl-Pv were measured at pressures and temperatures up to 32 GPa and 1,500 K, respectively. All the unit-cell volume data of FeAl-Pv perovskite were fitted to the high temperature Birch–Murnaghan equation of state and a complete set of thermoelastic parameters of this perovskite was determined with an assumption of K′ _300,0 = 4. The determined parameters are K _300,0 = 243(3) GPa, (∂K _T,0/∂T) _P = −0.030(8) GPa/K, a ₀ = 2.78(18) × 10⁻⁵ K⁻¹, and b ₀ = 0.88(28) × 10⁻⁸ K⁻², where a ₀ and b ₀ are the coefficients of the following expression describing the zero-pressure thermal expansion: α _T,0 = a ₀ + b ₀ T. The equation-of-state parameters of FeAl-Pv are in good agreement with those of MgSiO₃ perovskite at the conditions corresponding to the uppermost part of the lower mantle.     

Trends and short-term prospects for copper demand

In recent years, the rate of consumption of minerals and energy has been increasing. Herein, a few fundamental components of mineral consumption including population growth, rising standard of living, advances in technology, and economic growth are analyzed. Copper is one of the best resources for illustrating the growth of metal consumption and components of that growth because statistical data for copper are quite comprehensive. Among the various factors examined, an index of rising standards of living is the most significant factors explaining growth of copper consumption.     

Distribution of particulate organic carbon and nitrogen in the Bering Sea and northern North Pacific Ocean

Particulate matter was collected in the Bering Sea and the northern North Pacific Ocean during the cruise of R. V. Hakuho-maru, Ocean Research Institute of Tokyo University in summer of 1975. The particulate matter was analyzed for organic carbon and nitrogen, chlorophylla and amino acids.The concentrations of particulate organic carbon and nitrogen were measured with the range of 16–422gC l^–1 and 1–85gN l^–1, 19–186gC l^–1 and 1–26gN l^–1, 46–1,038gC l^–1 and 6–79gN l^–1 and 19–246gC l^–1 and 2–25gN l^–1 in the Oyashio, the Deep Bering Sea, the continental shelf of Bering Sea and the northern North Pacific, respectively. Particulate organic carbon and nitrogen decreased with depth throughout the areas. The average concentrations of organic carbon and nitrogen in the entire water column tended to decrease in the following order; the continental shelf > Oyashio > northern North Pacific > Deep Bering Sea.C/N of particulate matter varied in the range of 3–15 (7 on average) in surface waters throughout the areas and these values tended to increase with depth to 5–20 (11 on average) in deep waters without significant regional variability.Linear regressions between chlorophylla and particulate organic carbon in the euphotic layers indicate that detrital organic carbon accounted for 34.2, 44.9, 49.1 and 25.2 % of particulate organic carbon in the Oyashio, the Deep Bering Sea, the continental shelf and the northern North Pacific, respectively.Particulate amino acid was determined in the range of 10.3–78.0g l^–1, 104–156g l^–1 and 10.4–96.4g l^–1 in the Deep Bering Sea, the continental shelf and the northern North Pacific, respectively. Aspartic acid, glutamic acid, serine, glycine and alanine were found as dominant species of amino acid of particulate matter.     

Differential sorption of organic matter by various sized sediment particles in recent sediment from the bering sea

A recent unconsolidated marine sediment collected from the Aleutian basin of the Bering Sea (5702.9N, 17657.4W) was separated into eight size fractions by sieving. Each of the fractions was analyzed for density, organic carbon, total nitrogen and various organic materials. A detailed analysis of the correlation of organic carbon and total nitrogen to the mean diameter of the particles separated, indicated that the surface sorption processes of organic matter were the determinative factor controlling the concentration of organic carbon and total nitrogen on silt and clay particles of the sediments.Selective sorption of amino acids was found to occur in the 8–20 and 5–8m. fractions of the sediment. This is assumed to be due to their surface active property.     

Determination of reaction kinetics using grain size: An application for metamorphic zircon growth

The reaction kinetics of metamorphic minerals can be subdivided into interface‐ and diffusion‐controlled kinetics. The discrimination of reaction kinetics is crucial for estimating reaction rates. Here, we propose a new and simple method for discriminating reaction kinetics. This method requires measuring only the initial and final grain sizes during growth. The reaction kinetics is inferred from different plotted arrays of initial vs. final grain sizes after the mineral growth. Using metamorphic zircon, we take detrital core sizes as the initial sizes and post‐metamorphic grain sizes as the final sizes. The application of the method to the subduction‐related high‐pressure Nagasaki metamorphic complex in Japan shows that this metamorphic zircon grew under interface‐controlled kinetics even at the relatively low temperature of 440°C. This method is potentially applicable to other minerals that have time‐markers, such as chemical zoning or internal structures that are captured at a given point in time during growth.     

A fluorescent approach to the identification of grout injected into fissures and pore spaces

A new fluorescent approach was developed to visualize grouting processes. The evaluation of the effect of grouting is carried out by methods based mainly on physical measurements such as permeability and porosity characteristics. However, these estimates do not necessarily correlate with practical grouting data. In this paper, the distributions of various grout mixtures containing fluorescent substances were clearly visualized under ultraviolet light, using a borehole television system or a microscope. Since this approach enabled direct observation of grout distribution, it is considered that this approach is useful for analysis of grouting mechanisms, designing grout curtains, etc.     

Iron, manganese and aluminum in upper waters of the western South Pacific Ocean and its adjacent seas

Total dissolvable iron, manganese and aluminum distributions in upper waters were determined in the western South Pacific, Solomon Sea, Coral Sea, and Tasman Sea. In these oceanic regions, the surface aluminum distributions well reflect the atmospheric deposition pattern of mineral dust in the western South Pacific reported previously. Surface manganese distributions derive mainly from lateral transportation from the coastal sediments of western tropical islands. Compared to Mn and Al, the Fe distributions reflect the nutrient cycle in upper waters. Iron limitation over the vast South Pacific, as revealed by physiological features of phytoplankton, seems to be caused by low atmospheric dust deposition and low Fe:N ratios in deep waters. In the western South Pacific, with its unique geographic and oceanographic settings, the local sources of trace metals might considerably affect their biogeochemical cycles.     

A near-infrared survey of Miras and the distance to the Galactic Centre

We report the results of a near-infrared survey for long-period variables in a field of view of 20× 30 arcmin² towards the Galactic Centre (GC). We have detected 1364 variables, of which 348 are identified with those reported in Glass et al. We present a catalogue and photometric measurements for the detected variables and discuss their nature. We also establish a method for the simultaneous estimation of distances and extinctions using the period–luminosity relations for the JHK _s bands. Our method is applicable to Miras with periods in the range 100–350 d and mean magnitudes available in two or more filter bands. While J band means are often unavailable for our objects because of the large extinction, we estimated distances and extinctions for 143 Miras whose H - and   K _s  -band mean magnitudes are obtained. We find that most are located at the same distance to within our accuracy. Assuming that the barycentre of these Miras corresponds to the GC, we estimate its distance modulus to be  14.58 ± 0.02 (stat.) ± 0.11 (syst.) mag  , corresponding to  8.24 ± 0.08 (stat.) ± 0.42 (syst.) kpc  . We have assumed the distance modulus to the Large Magellanic Cloud to be 18.45 mag, and the uncertainty in this quantity is included in the above systematic error. We also discuss the large and highly variable extinction. Its value ranges from 1.5 mag to larger than 4 mag in     except towards the thicker dark nebulae and it varies in a complicated way with the line of sight. We have identified mid-infrared counterparts in the Spitzer /IRAC catalogue of Ramírez et al. for most of our variables and find that they follow rather narrow period–luminosity relations in the 3.6–8.0 μm wavelength range.     

Spatial distribution of the apatite fission‐track ages in the Toki granite,central Japan: Exhumation rate of a Cretaceous pluton emplaced in the East Asian continental margin

The Cretaceous Toki granitic pluton of the Tono district, central Japan was emplaced in the East Asian continental margin at about 70 Ma. The Toki granite has apatite fission‐track (AFT) ages ranging from 52.1 ±2.8 Ma to 37.1 ±3.6 Ma (number of measurements, n = 33); this indicates the three‐dimensional thermal evolution during the pluton's low‐temperature history (temperature in the AFT partial annealing zone: 60–120 °C). The majority of the Toki granite has a spatial distribution of older ages in the shallower parts and younger ages in the deeper parts, representing that the shallower regions arrived (were exhumed) at the AFT closure depth earlier than the deeper regions. Such a cooling pattern was predominantly constrained by the exhumation of the Toki granitic pluton and was related to the regional denudation of the Tono district. The age–elevation relationships (AERs) of the Toki granite indicate a fast exhumation rate of about 0.16 ±0.04 mm/year between 50 Ma and 40 Ma. The AFT inverse calculation using HeFTy program gives time‐temperature paths (t–T paths), suggesting that the pluton experienced continuous slow cooling without massive reheating since about 40 Ma until the present day. A combination of the AERs and AFT inverse calculations represents the following exhumation history of the Toki granite: (i) the fast exhumation at a rate of 0.16 ±0.04 mm/year between 50 Ma and 40 Ma; (ii) slow exhumation at less than 0.16 ±0.04 mm/year after 40 Ma; and (iii) exposure at the surface prior to 30–20 Ma. The Tono district, which contains the Toki granite, underwent slow denudation at a rate of less than 0.16 ±0.04 mm/year within the East Asian continental margin before the Japan Sea opening at 25–15 Ma and then within the Southwest Japan Arc after the Japan Sea opening, which is in good agreement with representative denudation rates obtained in low‐relief hill and plain fields.