Evaluating post-wildfire logging-slash cover treatment to reduce hillslope erosion after salvage logging using ground measurements and remote sensing

Continuing long and extensive wildfire seasons in the Western US emphasize the need for better understanding of wildfire impacts including post-fire management scenarios. Advancements in our understanding of post-fire hillslope erosion and watershed response such as flooding, sediment yield, and debris flows have recently received considerable attention. The potential impacts of removing dead trees, called salvage logging, has been studied, however the use of remotely sensed imagery after salvage logging to evaluate spatial patterns and recovery is novel. The 2015 North Star Fire provided an opportunity to evaluate hillslope erosion reduction using two field experiments and coincidental remotely sensed imagery over 3 years. Simulated rill experiments with four flow rates were used to quantify hillslope erosion on skidder trails with and without added logging slash compared with a burned-only control. Seven replicated hillslope silt fence plots with the same treatments were also evaluated for natural rainfall events. WorldView-2 satellite imagery was used to relate ground cover and erodible bare soil between the two experiments using multi-temporal Normalized Differenced Vegetation Index (NDVI) values. Results indicate that the skid trails produced significantly more sediment (0.70 g s⁻¹) than either the slash treated skid trail (0.34 g s⁻¹) or controls (0.04 g s⁻¹) with the simulated rill experiment. Similarly, under natural rainfall conditions sediment yield from hillslope silt fence plots was significantly greater for the skid trail (3.42 Mg ha⁻¹) than either the slash treated skid trail (0.18 Mg ha⁻¹) or controls (0 Mg ha⁻¹). An NDVI value of 0.32 on all plots over all years corresponded to a ground cover of about 60% which is an established threshold for erosion reduction. Significant relationships between NDVI, ground cover, and sediment values suggest that NDVI may help managers evaluate ground cover and erosion potential remotely after disturbances such as a wildfire or salvage logging.     

Vergleichende Untersuchungen des Oberflächenplanktons von vier verschieden-artigen Gewässern in der Gegend des Pfäffikersees

Ohne Zusammenfassung     

On the significance of CO2 inclusions in plagioclase microphenocrysts in tholeiite from Moeraki,New Zealand

Liquid plus vapour inclusions of CO₂ are widespread in plagioclase microphenocrysts in small tholeiitic intrusions and tephra of the Moeraki and adjacent areas of northeast Otago, New Zealand. They imply the presence of immiscible CO₂ droplets in the magma at depths of about 7–14 km. Their presence within 5 μm of the edges of microphenocrysts as little as 35 μm thick and 118 μm long indicates minimal feldspar crystal growth during the final ascent and quenching of the magma. Delicate branching clusters of lath-like microphenocrysts escaped disruption during this ascent. Such CO₂ inclusions are a potential source of ‘excess argon’ perturbing K-Ar age determinations. Received March 24, 1993/Accepted September 10, 1993     

Effectiveness of post-fire salvage logging stream buffer management for hillslope erosion in the U.S. Inland Northwest Mountains

Active wildfire seasons in the western U.S. warrant the evaluation of post-fire forest management strategies. Ground-based salvage logging is often used to recover economic loss of burned timber. In unburned forests, ground-based logging often follows best management practices by leaving undisturbed areas near streams called stream buffers. However, the effectiveness of these buffers has not been tested in a post-wildfire setting. This experiment tested buffer width effectiveness with a novel field-simulated rill experiment using sediment-laden runoff (25 g/L) released over 40 min at evenly timed flow rates (50, 100 and 150 L/min) to measure surface runoff travel length and sediment concentration under unburned and high and low soil burn severity conditions at 2-, 10- and 22-month post-fire. High severity areas 2-month post-fire had rill lengths of up to 100 m. Rill length significantly decreased over time as vegetation regrowth provided ground cover. Sediment concentration and sediment dropout rate also varied significantly by soil burn severity. Sediment concentrations were 19 g/L for the highest flow 2-month post-fire and reduced to 6.9–14 g/L 10-month post-fire due to abundant vegetation recovery. The amount of sediment dropping out of the flow consistently increased over the study period with the low burn severity rate of 1.15 g L⁻¹ m⁻¹ approaching the unburned rate of 1.29 g L⁻¹ m⁻¹ by 2-year post-fire. These results suggest that an often-used standard, 15 m buffer, was sufficient to contain surface runoff and reduce sediment concentration on unburned sites, however buffers on high burn severity sites need to be eight times greater (120 m) immediately after wildfire and four times greater (60 m) 1-year post-fire. Low burn severity areas 1-year post-fire may need to be only twice the width of an unburned buffer (30 m), and 2-year post-fire these could return to unburned widths.     

Martian great dust storms: Interpretive axially symmetric models

The simplified theory of steady, nearly inviscid, thermally forced axially symmetric atmospheric motions developed by Schneider (1977) is applied to the study of the problem of the Martian great dust storms. A highly idealized calculation of the atmospheric response to heating concentrated in a small latitude band is carried out. Qualitatively different local and global response regimes are identified. As the heating is increased from zero, some critical value is reached at which the response jumps from local to global. It is suggested that this transition from local to global response may be related to the observed explosive growth of great dust storms. Results from the idealized model indicate that subtropical latitudes are favored for the initiation of a dust raising global dust storm, as the meridional scale of the response to a heat source of fixed intensity is largest for the heat source located close to the equator, but the surface stress in the zonal direction produced by the response increases as the heat source is moved towards the poles. Also, the steady axially symmetric Martian response to solar forcing is examined. Modification to the solar forced response due to an added latitudinally localized heat source is briefly discussed, and it is indicated that similar transition behavior to that obtained in the more idealized model is to be expected in this case also. Implications of the dynamical model for the dependence of the occurence of great dust storms on orbital parameters are remarked on.     

SWAS observations of water vapor in the Venus mesosphere

We present the first detections of the ground-state H₂¹⁶O (₁₁₀-₁₀₁) rotational transition (at 556.9 GHz) and the ¹³CO (5-4) rotational transition from the atmosphere of Venus, measured with the Submillimeter Wave Astronomy Satellite (SWAS). The observed spectral features of these submillimeter transitions originate primarily from the 70-100 km altitude range, within the Venus mesosphere. Observations were obtained in December 2002, and January, March, and July 2004, coarsely sampling one Venus diurnal period as seen from Earth. The measured water vapor absorption line depth shows large variability among the four observing periods, with strong detections of the line in December 2002 and July 2004, and no detections in January and March 2004. Retrieval of atmospheric parameters was performed using a multi-transition inversion algorithm, combining simultaneous retrievals of temperature, carbon monoxide, and water profiles under imposed constraints. Analysis of the SWAS spectra resulted in measurements or upper limits for the globally averaged mesospheric water vapor abundance for each of the four observation periods, finding variability over at least two orders of magnitude. The results are consistent with both temporal and diurnal variability, but with short-term fluctuations clearly dominating. These results are fully consistent with the long-term study of mesospheric water vapor from millimeter and submillimeter observations of HDO [Sandor, B.J., Clancy, R.T., 2005. Icarus 177, 129-143]. The December 2002 observations detected very rapid change in the mesospheric water abundance. Over five days, a deep water absorption feature consistent with a water vapor abundance of 4.5±1.5 parts per million suddenly gave way to a significantly shallower absorption, implying a decrease in the water vapor abundance by a factor of nearly 50 in less that 48 h. In 2004, similar changes in the water vapor abundance were measured between the March and July SWAS observing periods, but variability on time scales of less than a week was not detected. The mesospheric water vapor is expected to be in equilibrium with aerosol particles, primarily composed of concentrated sulfuric acid, in the upper haze layers of the Venus atmosphere. If true, moderate amplitude (10-15 K) variability in mesospheric temperature, previously noted in millimeter spectroscopy observations of Venus, can explain the rapid water vapor variability detected by SWAS.     

The Nazca Group of south-central Peru: Age,source, and regional volcanic and tectonic significance

The Nazca Group, exposed east of Nazca, Peru, consists of a lower part composed of conglomerate and finer-grained clastic strata and an upper part made up of at least seven ash-flow sheets (cooling units or ignimbrites), collectively known as the Nazca Tuff. These tuffs were erupted between about 22 and 18 m.y. ago from a vent area in the vicinity of Pampa Galeras now marked by a collapse caldera. The early Miocene age of the Nazca Tuff provides additional evidence for a major pulse of largely pyroclastic felsic volcanism throughout the central Andes during the early Miocene. Recognition of the Pampa Galeras caldera supports the idea that many of these rocks were erupted from vent areas of the collapse-caldera type located near the eastern margin of the Coastal batholith.The Nazca Group overlies a major erosional surface cut on the Coastal batholith and its envelope that can be traced southward to the Chilean border. This surface is a continuation of the post-Incaic erosional surface to the north, which is overlain by conglomerate and radiometrically dated volcanic rock of late Eocene age. The post-Incaic surface therefore represents a major episode of regional uplift and pedimentation that followed early Tertiary orogeny. The absence of volcanic rocks of late Eocene/early Oligocene age overlying the Coastal batholith near Nazca and in southern Peru may reflect a general absence of post-Incaic volcanism in this portion of the Andes possibly related to differences in the angle of subduction and/or restriction of volcanic and volcaniclastic rocks of this age to depositional basins east of the batholith.     

Electrodynamic Disaggregation: Does it Affect Apatite Fission-Track and (U-Th)/He Analyses?

Apatite fission-track and (U-Th)/He analyses require the liberation of intact idiomorphic apatite grains from rock samples. While routinely being carried out by mechanical methods, electrodynamic disaggregation (ED) offers an alternative approach. The high-voltage discharges produced during the ED process create localised temperature peaks (10000 K) along a narrow plasma channel. In apatite, such high temperatures could potentially reduce the length of fission tracks, which start to anneal at temperatures > 60 °C, and could also enhance He diffusion, which becomes significant at 30–40 °C over geological time scales. A comparison of fission-track analyses and (U-Th)/He ages of apatites prepared both by mechanical (jaw crusher, disk mill) and ED processing provides a way of determining whether heating during the latter method has any significant effect. Apatites from three samples of different geological settings (an orthogneiss from Madagascar, the Fish Canyon Tuff, and a muscovite-gneiss from Greece) yielded statistically identical track length distributions compared to samples prepared mechanically. Additionally, (U-Th)/He ages of apatites from a leucogranite from Morocco prepared by both methods were indistinguishable. These first results indicated that during electrodynamic disaggregation apatite crystals were not heated enough to partially anneal the fission tracks or induce significant diffusive loss of He.     

Stellar populations as a function of radius in giant elliptical galaxies

Accurate surface photometry has been obtained inJ andK for 12 giant elliptical galaxies. Ellipses have been fitted, to obtain luminosity, ellipticity, and major axis position angle profiles. The results have been combined with visual profiles from CCD observations. We find that elliptical galaxies become bluer inV - K on the average by 0.3 (mag/sq xr _e) going outward from the nucleus. Radial colour gradients inV - K correlate strongly with those inU - V andB - V. By modelling, using theoretical isochrones, it is found that the observed colour gradients can be explained by a gradient in metallicity, if in addition the proportion of hot stars rises very rapidly with decreasing metallicity.     

Thermal history of the unsaturated zone at Yucca Mountain,Nevada, USA

Secondary calcite, silica and minor amounts of fluorite deposited in fractures and cavities record the chemistry, temperatures, and timing of past fluid movement in the unsaturated zone at Yucca Mountain, Nevada, the proposed site of a high-level radioactive waste repository. The distribution and geochemistry of these deposits are consistent with low-temperature precipitation from meteoric waters that infiltrated at the surface and percolated down through the unsaturated zone. However, the discovery of fluid inclusions in calcite with homogenization temperatures (T_h) up to ∼80 °C was construed by some scientists as strong evidence for hydrothermal deposition. This paper reports the results of investigations to test the hypothesis of hydrothermal deposition and to determine the temperature and timing of secondary mineral deposition. Mineral precipitation temperatures in the unsaturated zone are estimated from calcite- and fluorite-hosted fluid inclusions and calcite δ¹⁸O values, and depositional timing is constrained by the ²⁰⁷Pb/²³⁵U ages of chalcedony or opal in the deposits. Fluid inclusion T_h from 50 samples of calcite and four samples of fluorite range from ∼35 to ∼90 °C. Calcite δ¹⁸O values range from ∼0 to ∼22‰ (SMOW) but most fall between 12 and 20‰. The highest T_h and the lowest δ¹⁸O values are found in the older calcite. Calcite T_h and δ¹⁸O values indicate that most calcite precipitated from water with δ¹⁸O values between −13 and −7‰, similar to modern meteoric waters.