Advances in understanding of the mechanism for generation of earthquake thermal precursors detected by satellites

Stresses building up during an earthquake preparation phase also manifest themselves in the form of a so called increased land surface temperature (LST) leading to a thermal precursor prior to the earthquake event. This phenomenon has now been validated by our observations of short-term thermal anomalies detected by infrared satellite sensors for several recent past earthquakes around the world. The rise in infrared radiance temperature was seen to vary between 5 and 12 °C for different earthquakes. We discuss in this paper different explanations for the generation of such anomalies that have been offered. Emission of gases due to the opening and closure of micropores upon induced stresses and also the participation of ground water have been propounded as a possible cause for generation of thermal anomalies. Seismo-ionosphere coupling, by which gases like radon move to the earth–atmosphere interface and cause air ionization thus bringing about a change in air temperature, relative humidity, etc., has been put forth by some workers. A mechanism of low frequency electromagnetic emission was tested and experimented by scientists with rock masses in stressed conditions as those that exist at tectonic locations. The workers proposed the positive hole pair theory, which received support from several scientific groups. Positive holes (sites of electron deficiency) are activated in stressed rocks from pre-existing yet dormant positive hole pairs (PHPs) and their recombination at rock–air interface leads to a LST rise. A combination of remote sensing detection of rock mechanics behavior with a perception of chemistry and geophysics has been applied to propose the remote sensing rock mechanics theory. Remote sensing detections of such anomalies confirm so far proposed lab theories for such a hotly debated field as earthquake precursor study by providing unbiased observations with consistency in time and space distribution.     

Generation and validation of DEM using SAR interferometry and differential GPS supported by multispectral optical data

Digital elevation model (DEM) and the derived terrain parameters e.g. contour, slope, aspect, drainage pattern, etc are required for natural resources management, infrastructure planning and disaster management. The present paper aims at generating DEM from ERS tandem pair using interferometric technique supported by differential GPS measurements (DGPS) and multispectral optical data. Validation of DEM has been carried out by DGPS measurements. Ground Control Points (GCP) established by DGPS measurements have been used to georeference the IRS-1D optical data that has finally been co-registered with SAR amplitude image. Optical data, co-registered with ERS - I SAR data has helped in locating the GCP’s and check points, precisely, for refinement of DEM and its validation.     

An image engineering system for the inspection of transparent construction materials

This article presents a modular photogrammetric recording and image analysis system for inspecting the material characteristics of transparent foils, in particular Ethylen–TetraFluorEthylen-Copolymer (ETFE) foils. The foils are put under increasing air pressure and are observed by a stereo camera system. Determining the time-variable 3D shape of transparent material imposes a number of challenges: especially the automatic point transfer between stereo images and, in temporal domain, from one image pair to the next. We developed an automatic approach that accommodates for these particular circumstances and allows reconstruction of the 3D shape for each epoch as well as determining 3D translation vectors between epochs by feature tracking. Examples including numerical results and accuracy measures prove the applicability of the system.     

Integrated approach for demarcating the fracture zone for well site location : A case study near Gumla and Lohardaga,Bihar

In recent years satellite remote sensing techniques have greatly aided identification of fractures/joints/faults in connection with groundwater exploration. However, due to some constraints in filtering out the type of fracture i.e. shear fracture, tensional fracture, mineralised fracture etc. as to their “open or closed” nature from groundwater aspects, there is need of adding geophysical survey, particularly resistivity survey to further enhance the accuracy, and hence minimise drilling failures. The area under study is a part of Ranchi plateau and lithologically comprising of granite-gneiss. The present paper lays stress on an integrated approach for localising well sites through satellite data analysis and resistivity profiling along with vertical electrical sounding which is based on fracture patterns. With this combined effort i.e. firstly considering the surfacial features like drainage, geomorpho-logy, lithology and lineaments, and secondly taking into account geophysical survey aspects, i.e. depth and thickness of fracture zone, lateral extent, different layer parameter, etc., fairly accurate results are achieved. In the presnt study this type of an integrated survey has been carried out in Lohardaga and Gumla districts in Bihar, the results of which are highlighted in the paper.     

Consideration of time-correlated errors in a Kalman filter applicable to GNSS

An algorithm for considering time-correlated errors in a Kalman filter is presented. The algorithm differs from previous implementations in that it does not suffer from numerical problems; does not contain inherent time latency or require reinterpretation of Kalman filter parameters, and gives full consideration to additive white noise that is often still present but ignored in previous implementations. Simulation results indicate that the application of the new algorithm yields more realistic and therefore useful state and covariance information than the standard implementation. Results from a field test of the algorithm applied to the problem of kinematic differential GPS demonstrate that the algorithm provides slightly pessimistic covariance estimates whereas the standard Kalman filter provides optimistic covariance estimates.     

Land damage assessment - a case study

The paper discusses the land damage assessment and change detection analysis with reference to a mineral bearing zone in Manjhi, Manuni and Churan valleys. The area is located in environmentally sensitive and fragile region of Himalaya and constitutes of nearly 400 small-scale mines of slate, which were operative since last one hundred years and are stopped by court of law since 1995 on account of environment deterioration. The status of land degradation has been studied using IRS-1B satellite data of 1988,1992 and 1995. The geo-coded data on 1:50,000 scale has been interpreted and an increase in land degradation status was noticed. Finally, the management strategy for arresting the further land damage in a broader perspective is suggested.     

Land Cover Mapping for Namdapha National Park (Arunachal Pradesh), India Using Harmonized Land Cover Legends

Since last few decades RS-GIS is playing vital role in studying and mapping spatiotemporal responses of land cover, however, as a matter of fact, the mapping outputs largely depend on the expert's/user's preferences because location specific and people specific land cover classification systems are adopted autonomously for image classification in GIS. This may actually lead to an ambiguous definition of a particular land cover type when such different maps are compared at global level. In 1993, FAO and UNEP started efforts for development of a software tool know as LCCS which is a comprehensive standardized tool capable of providing land cover characterization to all possible land cover types in the world regardless of spatial relevance, mapping scale, data collection method etc. Adding to the global efforts of land cover legend harmonization and mapping, this study presents development of harmonized land cover legends for Namdapha National Park located in north-eastern Indian Himalayan region using LCCS and subsequent mapping. The potential of Remote Sensing (RS) and Geographical Information Systems (GIS) in forest/land cover mapping is very well recognized. Therefore, adopting the developed harmonized legends for the study area, land cover mapping was done using RS-GIS approach.     

Use of the L2C signal for inversions of GPS radio occultation data in the neutral atmosphere

Results from processing FORMOSAT-3/COSMIC radio occultations (RO) with the new GPS L2C signal acquired both in phase locked loop (PLL) and open loop (OL) modes are presented. Analysis of L2P, L2C, and L1CA signals acquired in PLL mode shows that in the presence of strong ionospheric scintillation not only L2P tracking, but also L1CA tracking often fails, while L2C tracking is most stable. The use of L2C improves current RO processing in the neutral atmosphere mainly by increasing the number of processed occultations (due to significant reduction in the number of L2 tracking failures) and marginally by a reduction in noise in statistics. The latter is due to the combination of reduced L2C noise (compared to L2P) and increased L1CA noise in those occultations where L2P would have failed. This result suggests application of OL tracking for L1CA and L2C signals throughout an entire occultation to optimally acquire RO data. Two methods of concurrent processing of L1CA and L2C RO signals are considered. Based on testing of individual occultations, these methods allow: (1) reduction in uncertainty of bending angles retrieved by wave optics in the lower troposphere and (2) reduction in small-scale residual errors of the ionospheric correction in the stratosphere.     

Generation of Vegetation Fraction and Surface Albedo Products Over India from Ocean Colour Monitor (OCM) Data Onboard Oceansat-2

The use of Local Area Coverage (LAC) data from Ocean Color Monitor (OCM) sensor of Oceansat-2 with its high radiometric resolution (12 bits/pixel) and 2-day repeat cycle for rapid monitoring of vegetation growth and estimating surface albedo for the Indian region is demonstrated in this study. For the vegetation monitoring, normalized difference vegetation index (NDVI) and vegetation fraction (VF) products were estimated by maximum value composite approach fortnightly and were resampled to 1 km. The surface albedo products were realized by converting narrow-band eight-band spectral reflectance OCM data to a) visible (300–700 nm) and b) broad band (300–3,000 nm) data. For validation, the derived products were compared with respective MODIS global products and found to be in good agreement.     

Toward seamless indoor-outdoor applications: Developing stakeholder-oriented location-based services

Location-Based Services (LBS), an emerging new business based on smartphone and mobile networks, are becoming more and more popular. Most of these LBSs, however, only offer non-seamless indoor/outdoor applications and simple applications without giving stakeholders the chance to play an active role. Our specific aim is to solve these issues. This paper presents concepts to solve these issues by expanding the Open Location Services Interface Standard (OpenLS) to allow seamless indoor/outdoor positioning and to extend the content of the services to include information recommended by stakeholders.