Identification of shocked quartz by scanning cathodoluminescence imaging

Abstract— Quartz grains subjected to high‐strain‐rate shock waves owing to meteorite or cometary impact on Earth's surface commonly display shock lamellae. These lamellae appear as remarkably straight, thin, planar features (microstructures) in sets within which lamellae are essentially parallel to each other and spaced ≤ 20 μm apart. Two or more intersecting sets are typically present. Shock lamellae are commonly recognized and identified by optical methods, by use of the transmission electron microscope (TEM), and by etching polished sections and subsequent examination with a scanning electron microscope (SEM) operated in the secondary electron mode. We present here a method for observing planar microstructures in shocked quartz by using a cathodoluminescence (CL) detector attached to a SEM. The method relies on the fact that planar microstructures in quartz arising as a result of shock display no CL whatever; thus, they show up as distinct, thin, black lines on otherwise luminescent quartz grains. We used scanning CL imaging to study shocked quartz from the Ries Crater, Germany, a well‐known impact crater of Miocene age. We demonstrate that shock‐produced planar microstructures are clearly displayed in SEM‐CL images and can be distinguished from microfractures generated by tectonism, and subsequently filled with quartz, and other similar features not related to impact events. The SEM‐CL method provides a powerful supplement to other methods of identifying shocked quartz. It commonly provides better spatial resolution than does standard optical methods, and does not require etching of quartz grains. Further, it is easier and faster to use than are TEM methods, although it is not capable of the fine‐scale defect analysis possible with TEM.     

STEREO/Extreme Ultraviolet Imager (EUVI) Event Catalog 2006 – 2012

We generated an event catalog with an automated detection algorithm based on the entire EUVI image database observed with the two Solar Terrestrial Relations Observatory (STEREO)-A and -B spacecraft over the first six years of the mission (2006?–?2012). The event catalog includes the heliographic positions of some 20?000 EUV events, transformed from spacecraft coordinates to Earth-based coordinates, and information on associated GOES flare events (down to the level of GOES A5-class flares). The 304 Å wavelength turns out to be the most efficient channel for flare detection (79?% of all EUVI event detections), while the 171 Å (4?%), 195 Å (10?%), and the 284 Å channel (7?%) retrieve substantially fewer flare events, partially due to the suppressing effect of EUV dimming, and partially due to the lower cadence in the later years of the mission. Due to the Sun-circling orbits of STEREO-A and -B, a large number of flares have been detected on the farside of the Sun, invisible from Earth, or seen as partially occulted events. The statistical size distributions of EUV peak fluxes (with a power-law slope of α _P =2.5±0.2) and event durations (with a power-law slope of α _T =2.4±0.3) are found to be consistent with the fractal-diffusive self-organized criticality model. The EUVI event catalog is available on-line at secchi.lmsal.com/EUVI/euvi_autodetection/euvi_events.txt and may serve as a comprehensive tool to identify stereoscopically observed flare events for 3D reconstruction and to study occulted flare events.     

Kinematic hardening of soft clay in simple shear

In a separate paper, the authors have proposed a normalized, non-degrading form of the shear stress–shear strain relationship for undrained, cyclic simple shear of soft clay. This relationship is described in the present paper, and it is seen to include a single fatigue parameter—the mean effective stress. Application of the relationship therefore requires knowledge of the history of the mean effective stress during any loading history. The present paper proposes an effective stress path model which may be used for prediction of this history. The model is developed within the framework of bounding surface kinematic and isotropic hardening plasticity. It incorporates an isotropic hardening bounding surface, and a kinematic hardening yield surface, in which the elastic region vanishes, and so the yield surface reduces to the stress point. The normalized shear stress–shear strain relationship, developed on the basis of Iwan's model, is used to establish the shape of the cap of the bounding surface. A new translation rule is also incorporated in the model, allowing improved prediction of stress path development within the bounding surface during regular or irregular cyclic loading. Use of the proposed model to simulate the behaviour of soft clay in laboratory undrained cyclic simple shear tests shows excellent qualitative agreement, with most of the major features of the actual behaviour being predicted.     

Seismic analysis of infinite pile groups in liquefiable soil

Numerical analysis of an infinite pile group in a liquefiable soil was considered in order to investigate the influence of pile spacing on excess pore pressure distribution and liquefaction potential. It was found that an optimal pile spacing exists resulting in minimal excess pore pressure. It was also found that certain pile group configurations might reduce liquefaction potential, compared to free field conditions. It was observed that for closely spaced piles and low frequency of loading, pile spacing has little influence on the response of the superstructure.     

Step heating of Ar/Ar standard mineral mixtures: Investigation of a fine-grained bulk sediment provenance tool

Quantitative techniques that link sediments to their sources are needed to understand a range of tectonic, climate, and anthropogenic driven Earth surface processes. Many provenance techniques exist for sand-sized material but fewer are available for fine-grained sediment archives. In this respect, bulk ⁴⁰Ar/³⁹Ar ages from silt-sized sediment show potential, but many questions remain about the significance of a bulk sediment ⁴⁰Ar/³⁹Ar age. We interrogate bulk sediment ⁴⁰Ar/³⁹Ar ages by step heating mixtures of well-constrained ⁴⁰Ar/³⁹Ar mineral standards crushed to silt-sized. Silt-sized end member components Alder Creek Sanidine, Taylor Creek Sanidine and Heidelberg Biotite all yield plateau ages within uncertainty of their coarse-grained counterparts. High-resolution step heating (as many as 43 steps) of the mineral mixtures shows that biotite degasses first at lower temperatures compared to the two sanidines that degas generally in concert. Concordant age steps develop at both low and high temperatures and the transition from the isotope signal being dominated by one mineral phase to another is clearly observed. We show that age spectra for the mineral standard mixtures can be modeled and predicted for all mixtures by assuming a (simplistic) Gaussian distributed release of Ar, and by using the degassing maxima, variance, K concentration, and ⁴⁰Ar/³⁹Ar age of each monitor mineral. Thus, bulk sediment ⁴⁰Ar/³⁹Ar ages can be robust indicators of the average cooling/crystallization age of all contributing K-bearing minerals to a depositional center. Furthermore, we discuss the potential to deconvolve individual mineral age populations by model inversion. The application of this bulk sediment provenance technique should not be considered a replacement for single grain analyses. It should be applied to environments that do not provide sand-sized sediment archives (e.g., distal terrigenous sedimentary archives) when information about source changes through time are more important than precise sediment source identification.     

Pb isotopic variability in the modern-Pleistocene Indus River system measured by ion microprobe in detrital K-feldspar grains

The western Himalaya, Karakoram and Tibet are known to be heterogeneous with regard to Pb isotope compositions in K-feldspars, which allows this system to be used as a sediment provenance tool. We used secondary ion mass spectrometry to measure the isotopic character of silt and sand-sized grains from the modern Sutlej and Chenab Rivers, together with Thar Desert sands, in order to constrain their origin. The rivers show a clear Himalayan provenance, contrasting with grains from the Indus Suture Zone, but with overlap to known Karakoram compositions. The desert dunes commonly show ²⁰⁷Pb/²⁰⁴Pb and ²⁰⁶Pb/²⁰⁴Pb values that are much higher than those seen in the rivers, most consistent with erosion from Nanga Parbat. This implies at least some origin from the trunk Indus, probably reworked by summer monsoon winds from the SW, a hypothesis supported by bulk Nd and U-Pb zircon dating. Further data collected from Holocene and Pleistocene sands shows that filled and abandoned channels on the western edge of the Thar Desert were sourced from Himalayan rivers before and at 6-8 ka, but that after that time the proportion of high isotopic ratio grains rose, indicating increased contribution from the Thar Desert dunes prior to ∼4.5 ka when flow ceased entirely. This may be linked to climatic drying, northward expansion of the Thar Desert, or changes in drainage style including regional capture, channel abandonment, or active local Thar tributaries. Our data further show a Himalayan river channel east of the present Indus, close to the delta, in the Nara River valley during the middle Holocene. While this cannot be distinguished from the Indus it is not heavily contaminated by reworking from the desert. The Pb system shows some use as a provenance tool, but is not effective at demonstrating whether these Nara sediments represent a Ghaggar-Hakra stream independent from the Indus. Our study highlights an important role for eolian reworking of floodplain sediments in arid rivers such as the Indus.     

Annual floods in New England (USA) and Atlantic Canada: synoptic climatology and generating mechanisms

New England and Atlantic Canada are characterized by mixed flood regimes that reflect different storm types, antecedent land surface conditions, and flood seasonality. Mixed flood regimes are known to complicate flood risk analyses, yet the synoptic climatology and precipitation mechanisms that generate annual floods in this region have not been described in detail. We analyzed a set of long-term annual flood records at climate-sensitive stream gauges across the region and classified the synoptic climatology of each annual flood, quantitatively describing the precipitation mechanisms, and characterize flood seasonality. We find that annual floods here are dominantly generated by Great Lakes-sourced storms and Coastal lows, known locally as ‘nor’easters.’ Great Lakes storms tend to be associated with lower magnitude annual floods (<75th percentile) and Coastal lows are more clearly associated with higher magnitude events (>75th percentile). Tropical cyclones account for few of all annual floods, including extreme events, despite causing some of the region’s largest and most destructive floods. Late winter/early spring is when the greatest number of annual floods occur region wide, and rainfall is the dominant flood-producing mechanism. Rainfall in combination with snowmelt is also important. Both mechanisms are expected to be impacted by projected regional climate change. We find little evidence for associations between flood-producing synoptic storm types or precipitation mechanisms and large-scale atmospheric circulation indices or time periods, despite upward trends in New England annual flood magnitudes. To more completely investigate such associations, partial duration flood series that include more floods than just the largest of each year, and their associated synoptic climatologies and precipitation mechanisms, should be analyzed.     

Exhibitions

In this paper we propose the use of ‘Encountering’ a location-based game (LBG) based on the Wherigo platform to facilitate interdisciplinary student learning about places on field courses. Deploying a mobile, digital map-based platform addresses significant challenges – such as the sacrifice of context specificity and methodological applicability and depth. It also runs the danger of ‘gamifying’ the fieldwork, blinding the participant to their own agency and emergent encounters. Interactive and layered digital map interfaces have affordances that can potentially overcome such challenges. We claim that one such affordance is the ability to play through the map. In other words, maps – and digital maps in particular – offer the possibility of decoupling results-orientated actions from free-form serendipitous engagement with the field. Our argument is two-fold. First, that LBG toolsets such as Wherigo can provide a ‘common ground’ for students engaging in place-based interdisciplinary research, by providing a material, cartographic basis for playful investigation. Second, that they can facilitate the production of ‘spaces of epistemological failure’, allowing students to challenge taken-for-granted conceptual and methodological axioms within and across disciplines.     

The Influence of Digital Surface Model Choice on Visibility‐based Mobile Geospatial Applications

In this work we investigate the effectiveness of different types of visibility models for use within location‐based services. This article outlines the methodology and results for our experiments, which were designed to understand the accuracy and effects of model choices for mobile visibility querying. Harnessing a novel mobile media consumption and authoring application called Zapp, the levels of accuracy of various digital surface representations used by a line of sight visibility algorithm are extensively examined by statistically assessing randomly sampled viewing sites across the 1 km² study area, in relation to points of interest (POI) across the University of Nottingham campus. Testing was carried out on three different surface models derived from 0.5 m LiDAR data by visiting physical sites on each surface model with 14 random point of interest masks being viewed from between 10 and 16 different locations, totalling 190 data points. Each site was ground‐truthed by determining whether a given POI could be seen by the user and could also be identified by the mobile device. Our experiments in a semi‐urban area show that choice of surface model has important implications for mobile applications that utilize visibility in geospatial query operations.     

An integrative method for the evaluation,monitoring, and comparison of seagrass habitat structure

Assessing environmental condition is essential for the management of coasts and their resources, but better management decisions occur when large databases are simplified into more manageable units of information. Here we present the habitat structure index (HSI), which enables rapid assessment and direct comparison of seagrass habitat structure using scores of 0 (poor) to 100 (excellent) based on integrating five habitat variables: area, continuity, proximity, percentage cover, and species identity. Acquiring data to calculate the HSI can be done in situ or from video recordings, and requires relatively simple methodology of belt transects, estimating percentage cover, and basic taxonomy. Spatiotemporal comparisons can usefully identify locations and periods of seagrass habitat change, potentially providing an early warning indicator of habitat damage and decline in environmental quality. Overall, the integrative approach of the HSI represents a step toward simplifying the exchange of environmental information among researchers, coastal managers, and governing bodies.