Thermal maturity and organic composition of Pennsylvanian coals and carbonaceous shales, north-central Texas: Implications for coalbed gas potential

Thermal maturity was determined for about 120 core, cuttings, and outcrop samples to investigate the potential for coalbed gas resources in Pennsylvanian strata of north-central Texas. Shallow (< 600 m; 2000 ft) coal and carbonaceous shale cuttings samples from the Middle-Upper Pennsylvanian Strawn, Canyon, and Cisco Groups in Archer and Young Counties on the Eastern Shelf of the Midland basin (northwest and downdip from the outcrop) yielded mean random vitrinite reflectance (R_o) values between about 0.4 and 0.8%. This range of R_o values indicates rank from subbituminous C to high volatile A bituminous in the shallow subsurface, which may be sufficient for early thermogenic gas generation. Near-surface (< 100 m; 300 ft) core and outcrop samples of coal from areas of historical underground coal mining in the region yielded similar R_o values of 0.5 to 0.8%. Carbonaceous shale core samples of Lower Pennsylvanian strata (lower Atoka Group) from two deeper wells (samples from ~ 1650 m; 5400 ft) in Jack and western Wise Counties in the western part of the Fort Worth basin yielded higher R_o values of about 1.0%. Pyrolysis and petrographic data for the lower Atoka samples indicate mixed Type II/Type III organic matter, suggesting generated hydrocarbons may be both gas- and oil-prone. In all other samples, organic material is dominated by Type III organic matter (vitrinite), indicating that generated hydrocarbons should be gas-prone. Individual coal beds are thin at outcrop (< 1 m; 3.3 ft), laterally discontinuous, and moderately high in ash yield and sulfur content. A possible analog for coalbed gas potential in the Pennsylvanian section of north-central Texas occurs on the northeast Oklahoma shelf and in the Cherokee basin of southeastern Kansas, where contemporaneous gas-producing coal beds are similar in thickness, quality, and rank.     

The vertical structure of planet-induced gaps in protoplanetary discs

Giant planets embedded in circumstellar discs are expected to open gaps in these discs. We examine the vertical structure of the gap edges. We find that the planet excites spiral arms with significant (Mach number of a half) vertical motion of the gas, and discuss the implications of these motions. In particular, the spiral arms will make the edge appear 'puffed up' relative to the bulk of the disc. Infrared observations (sensitive to dust) would be dominated by the light from the thick inner edge of the disc. Submillimetre observations (sensitive to gas velocities) would appear to be hot in 'turbulent' motions (actually the ordered motion caused by the passage of the spiral arms), but cold in chemistry. Resolved submillimetre maps of circumstellar discs might even be able to detect the spiral arms directly.     

Perceptions of local community members towards foreign aid: A case study of Vava'u,Tonga

Foreign aid has arguably played a significant role in the economic development of the Pacific Island countries. Tonga is deemed to have succeeded in implementing the principles of the Paris Declaration of 2005, especially Ownership, Alignment and Harmonisation, by aid funding channelled through state institutions. Nevertheless, it is still unknown if the aid effect has reached civil society, and how community members perceive aid. This article examines the perceptions of community members towards foreign aid, using the case study of the archipelago of Vava'u, Tonga.     

Pure elastic stiffness of sand represented by response envelopes derived from cyclic triaxial tests with local strain measurements

Acta Geotechnica - The elastic stiffness of a fine sand at small to moderate strains ( $$\varepsilon \le 2 \times 10^{-4}$$ ) has been studied based on cyclic triaxial tests on cube-shaped samples...     

Field spectroscopy and radiative transfer modelling to assess impacts of petroleum pollution on biophysical and biochemical parameters of the Amazon rainforest

Biophysical and biochemical plant foliage parameters play a key role in assessing vegetation health. Those plant parameters determine the spectral reflectance and transmittance properties of vegetation; therefore, hyperspectral remote sensing, particularly imaging spectroscopy, can provide estimates of leaf and canopy chemical properties. Based on the relationship between spectral response and biochemical/biophysical properties of the leaves and canopies, the PROSPECT radiative transfer model simulates the interaction of light with leaves. In this study, more than 1100 leaf samples from the Amazon forest of Ecuador were collected at several study sites, some of which are affected by petroleum pollution, and across the vertical profile of the forest. For every sample, field spectroscopy at leaf level was conducted with a spectroradiometer. The goal of this study was to assess leaf optical properties of polluted and unpolluted rainforest canopies across the vertical profile and identify vegetation stress expressed in changes of biophysical and biochemical properties of vegetation. An ANOVA followed by Holme’s multiple comparisons of means and a principal component analysis showed that photosynthetic pigments, chlorophyll and carotenoids have significantly lower levels across the vertical profile of the forest, particularly in sites affected by petroleum pollution. On the other hand, foliar water content showed significantly higher levels in the polluted site. Those findings are symptoms of vegetation stress caused by reduced photosynthetic activity and consequently decreased transpiration and water-use efficiency of the plants. Cross-comparison between SPAD-502 chlorophyll content meter index and chlorophyll content showed strong positive correlation coefficients (r = 0.71 and r ² = 0.51) which suggests that using the SPAD-502 chlorophyll index itself is sensitive enough to detect vegetation stress in a multispecies tropical forest. Therefore, the SPAD-502 can be used to assess chlorophyll content of vegetation across polluted and non-polluted sites at different canopy layers. The results presented in this paper contribute to the very limited literature on field spectroscopy and radiative transfer models applied to the vertical profile of the Amazon forest.     

Arsenic and antimony contamination of waters,stream sediments and soils in the vicinity of abandoned antimony mines in the Western Carpathians,Slovakia

Environmental contamination with As and Sb caused by past mining activities at Sb mines is a significant problem in Slovakia. This study is focused on the environmental effects of the 5 abandoned Sb mines on water, stream sediment and soil since the mines are situated in the close vicinity of residential areas. Samples of mine wastes, various types of waters, stream sediments, soils, and leachates of the mine wastes, stream sediments and selected soils were analyzed for As and Sb to evaluate their geochemical dispersion from the mines. Mine wastes collected at the mine sites contained up to 5166 mg/kg As and 9861 mg/kg Sb. Arsenic in mine wastes was associated mostly with Fe oxides, whereas Sb was present frequently in the form of individual Sb, Sb(Fe) and Fe(Sb) oxides. Waters of different types such as groundwater, surface waters and mine waters, all contained elevated concentrations of As and Sb, reaching up to 2150 μg/L As and 9300 μg/L Sb, and had circum-neutral pH values because of the buffering capacity of abundant Ca- and Mg-carbonates. The concentrations of Sb in several household wells are a cause for concern, exceeding the Sb drinking water limit of 5 μg/L by as much as 25 times. Some attenuation of the As and Sb concentrations in mine and impoundment waters was expected because of the deposition of metalloids onto hydrous ferric oxides built up below adit entrances and impoundment discharges. These HFOs contained >20 wt.% As and 1.5 wt.% Sb. Stream sediments and soils have also been contaminated by As and Sb with the peak concentrations generally found near open adits and mine wastes. In addition to the discharged waters from open adits, the significant source of As and Sb contamination are waste-rock dumps and tailings impoundments. Leachates from mine wastes contained as much as 8400 μg/L As and 4060 μg/L Sb, suggesting that the mine wastes would have a great potential to contaminate the downstream environment. Moreover, the results of water leaching tests showed that Sb was released from the solids more efficiently than As under oxidizing conditions. This might partly explain the predominance of Sb over As in most water samples.     

Experimental study of the K2ZrSi3O9 (wadeite)–K2TiSi3O9 and K2(Zr,Ti)Si3O9–phlogopite systems at 2–3 GPa

Experiments ranging from 2 to 3 GPa and 800 to 1300 °C and at 0.15 GPa and 770 °C were performed to investigate the stability and mutual solubility of the K₂ZrSi₃O₉ (wadeite) and K₂TiSi₃O₉ cyclosilicates under upper mantle conditions. The K₂ZrSi₃O₉–K₂TiSi₃O₉ join exhibits complete miscibility in the P–T interval investigated. With increasing degree of melting the solid solution becomes progressively enriched in Zr, indicating that K₂ZrSi₃O₉ is the more refractory end member. At 2 GPa, in the more complex K₂ZrSi₃O₉–K₂TiSi₃O₉–K₂Mg₆Al₂Si₆O₂₀(OH)₄ system, the presence of phlogopite clearly limits the extent of solid solution of the cyclosilicate to more Zr-rich compositions [Zr/(Zr + Ti) > 0.85], comparable to wadeite found in nature, with TiO₂ partitioning strongly into the coexisting mica and/or liquid. However, at 1200 °C, with increasing pressure from 2 to 3 GPa, the partitioning behaviour of TiO₂ changes in favour of the cyclosilicate, with Zr/(Zr + Ti) of the K₂(Zr,Ti)Si₃O₉ phase decreasing from ∼0.9 to ∼0.6. The variation in the Ti content of the coexisting phlogopite is related to its degree of melting to forsterite and liquid, following the major substitution ^VITi+^VI□=2^VIMg. Received: 26 January 1999 / Accepted: 10 January 2000     

An experimental study of partitioning of fluorine between K-richterite,apatite, phlogopite,and melt at 20 kbar

Phase relations have been determined at 20 kbar and primarily under suprasolidus conditions in the Fe−Ti-free F-bearing K-richterite—phlogopite and K-richterite—apatite systems in order to assess the partitioning of F among phlogopite, K-richterite, apatite, and melt under upper-mantle conditions. Both systems are pseudoternary because they contain forsterite, enstatite and a diopside-rich clinopyroxene from the breakdown of the mica and K-richterite. The F-bearing K-richterite systems have lower minimum melting temperatures than the F-bearing phlogopite —apatite system at the same pressure. However in the systems studied, F in phlogopite appears the most effective component in altering minimum liquid compositions whereas comparison between the present study and previous systems suggests that the presence of P₂O₅ during melting may result in more K-enriched melts. Variations in the compositions of the F-bearing phases are primarily controlled by the bulk compositions of the end-member minerals and by temperature, although buffering by non-F bearing minerals (e.g. clinopyroxene) may be effective. Distribution coefficients (as wt% ratios) between F-bearing minerals and coexisting liquids have been determined as functions of bulk composition and temperature for products of experiments. Distribution coefficients between K-richterite—liquid, apatite—liquid, and phlogopite—liquid are ≥1 to slightly <1 for most bulk compositions, indicating thatF is generally a compatible element. This conclusion is in agreement with the sequence ofF distribution for similar phases in ultrapotassic rocks. These results preclude F-bearing mineral reservoirs in the mantle, at depths corresponding to 20 kbar, being capable of producing F-enrichment in ultrapotassic magmas, or being effective in redox melting processes. Editorial responsibility: K. Hodges     

Lower crustal melting and the role of open-system processes in the genesis of syn-orogenic quartz diorite–granite–leucogranite associations: constraints from Sr–Nd–O isotopes from the Bandombaai Complex, Namibia

The Bandombaai Complex (southern Kaoko Belt, Namibia) consists of three main intrusive rock types including metaluminous hornblende- and sphene-bearing quartz diorites, allanite-bearing granodiorites and granites, and peraluminous garnet- and muscovite-bearing leucogranites. Intrusion of the quartz diorites is constrained by a U–Pb zircon age of 540±3 Ma.

Quartz diorites, granodiorites and granites display heterogeneous initial Nd- and O isotope compositions (_{Nd (540 Ma)}=−6.3 to −19.8; δ¹⁸O=9.0–11.6‰) but rather low and uniform initial Sr isotope compositions (⁸⁷Sr/⁸⁶Sr_initial=0.70794–0.70982). Two leucogranites and one aplite have higher initial ⁸⁷Sr/⁸⁶Sr ratios (0.70828–0.71559), but similar initial _Nd (−11.9 to −15.8) and oxygen isotope values (10.5–12.9‰). The geochemical and isotopic characteristics of the Bandombaai Complex are distinct from other granitoids of the Kaoko Belt and the Central Zone of the Damara orogen. Our study suggests that the quartz diorites of the Bandombaai Complex are generated by melting of heterogeneous mafic lower crust. Based on a comparison with results from amphibolite-dehydration melting experiments, a lower crustal garnet- and amphibole-bearing metabasalt, probably enriched in K₂O, is a likely source rock for the quartz diorites. The granodiorites/granites show low Rb/Sr (<0.6) ratios and are probably generated by partial melting of meta-igneous (intermediate) lower crustal sources by amphibole-dehydration melting. Most of the leucogranites display higher Rb/Sr ratios (>1) and are most likely generated by biotite-dehydration melting of heterogeneous felsic lower crust. All segments of the lower crust underwent partial melting during the Pan-African orogeny at a time (540 Ma) when the middle crust of the central Damara orogen also underwent high T, medium P regional metamorphism and melting. Geochemical and isotope data from the Bandombaai Complex suggest that the Pan-African orogeny in this part of the orogen was not a major crust-forming episode. Instead, even the most primitive rock types of the region, the quartz diorites, represent recycled lower crustal material.