Dinoflagellate cysts from the Upper Bajocian–Lower Oxfordian of the Dalichai Formation in Binalud Mountains (NE Iran): their biostratigraphical and biogeographical significance

The Binalud Mountains of NE Iran represent the easternmost extension of the Alborz Range. After the Mid-Cimmerian orogenic event and rapid subsidence, the deep marine sediments of the Dalichai Formation were deposited. A well-preserved section of the formation was sampled for palynological purposes. The study revealed diverse and nearly well-preserved dinoflagellate cyst assemblages. Thirty-six dinoflagellate cyst species identified lead to identification of four biozones: Cribroperidinium crispum (Late Bajocian), Dichadogonyaulax sellwoodii (Bathonian to Early Callovian), Ctenidodinium continuum (Early to Late Callovian), and Ctenidodinium tenellum (Early Oxfordian) biozones. The close similarities of dinoflagellate cyst assemblages between Binalud Mountains, NE Iran, with those of Alborz Mountains (Northern Iran) during Middle Jurassic confirm the connection between two sedimentary basins during this time in Iran. Meanwhile, this biozonation corresponds largely to that established in Northwest Europe and reveals the marine connection between NE and North of Iran with Northwest Europe and the Northwestern Tethys during the Late Bajocian to Early Oxfordian.     

Lithostratigraphie et histoire paléozoïque à paléocène des complexes métamorphiques de la région de Muteh, zone de Sanandaj–Sirjan (Iran méridional)Lithostratigraphy and Palaeozoic to Palaeocene history of some metamorphic complexes from Muteh area, Sanandaj–Sirjan zone (southern Iran)

A detailed analysis of metamorphic complexes outcropping in the Muteh area in central Iran leads to establish the regional stratigraphical column, and to propose a Palaeozoic age for the metamorphic protolith that mainly consists of volcano-sedimentary units. ⁴⁰K---⁴⁰Ar ages for minerals suggest the Mesozoic age of the metamorphic amphiboles and the Palaeocene ones for a late or even post metamorphic bimodal magmatism. To cite this article: N. Rachidnejad-Omran et al., C. R. Geoscience 334 (2002) 1185–1191.     

Long-term change of surface temperature in water bodies around Iran – Caspian Sea,Gulf of Oman,and Persian Gulf – using 2001–2015 MODIS data

ABSTRACT

To answer the question “what has changed the surface temperatures of water bodies around Iran under climate change conditions,” Moderate Resolution Imaging Spectroradiometer (MODIS) sea surface temperature (SST) data with 9.2-km spatial resolution and monthly time step were evaluated. A significant increasing trend was obtained using Pearson’s correlation coefficient and Mann-Kendall trend test on data from the Caspian Sea (June) and the Southern Gulfs (September). High correlations of 0.69 and 0.97 between remotely sensed data and ERA-Interim reanalysis data were also obtained for June and September, respectively. To assess the impact of some climatic parameters on SST variability in those two months, zonal and meridional wind at 10 m, wind speed at 10 m, air temperature at 2 m, and mean sea level pressure were evaluated. High correlations between meridional wind and the Southern Gulf SST, and meridional wind and Caspian SST were ?0.86 and 0.75, respectively. Moreover, the results showed an important role of air temperature (0.96) and sea level pressure (?0.77) in the rising temperature trends of the Southern Gulfs. Wind speed was also detected in both regions as a booster of the trend.     

A Unified Computational Method for Simulating Dynamic Behavior of Planing Vessels

High speed planing hulls have complex hydrodynamic behaviors. The trim angle and drafts are very sensitive to speed and location of the center of gravity. Therefore, motion simulation for such vessels needs a strong coupling between rigid body motions and hydrodynamic analysis. In addition, free surface should be predicted with good accuracy for each time step. In this paper, velocity and pressure fields are coupled by use of the fractional step method. On the basis of integration of the two-phase viscous flow induced stresses over the hull, acting loads (forces and moments) are calculated. With the strategy of boundary-fitted body-attached mesh and calculation of 6-DoF motions in each time step, time history of ship motions including displacements, speeds and accelerations are evaluated. For the demonstration of the software capabilities, circular cylinder slamming is simulated as a simple type of water slamming. Then, a high-speed planing catamaran is investigated in the case of steady forward motion. All of the results are in good concordance with experimental data. The present method can be widely implemented in design as well as in performance prediction of high-speed vessels.     

Bearing capacity of two close strip footings on soft clay reinforced with geotextile

For many years ago, the beneficial effects of using reinforcement to improve the property of soil have been demonstrated. Over the last three decades, the use of polymeric reinforcement such as geotextile has increased in geotechnical engineering. Among the possible applications, earth reinforcement techniques have become useful and economical techniques to solve many problems in geotechnical engineering practice, such as improve the bearing capacity and settlement characteristics of the footing. This research presents the effect of geotextile inclusion on the bearing capacity of two close strip footings located at the surface of soft clay. A broad series of finite element analysis were performed on two footings with width of 1 and 2 m using two-dimensional plane strain model using the computer code Plaxis (ver 8). Only one type of soft clay was used for the analysis, and the soil was represented by two yielding criteria including hardening soil model and Mohr–Coulomb model, while reinforcement was represented by elastic element, and at the interface between the reinforcements and soft clay, interface elements have been used. A wide range of boundary conditions, including unreinforced and reinforced cases, was analyzed by varying parameters such as number of geotextile layers, vertical spacing of layers, depth to topmost layer of geotextile, tensile stiffness of geotextile layers, and distance of between two footings. From numerical results, the bearing capacity ratio and the interference factor of the foundations have been estimated. On the basis of the analysis performed in this research, it can be concluded that there is a best distance between footings and optimum depth for topmost layer to achieve maximum bearing capacity for closely spaced strip footings. The bearing capacity was also found to increase with increasing number of reinforcement layers if the reinforcements were placed within a range of effective depths. In addition, the analysis indicated that increasing reinforcement stiffness beyond a threshold value does not result in a further increase in the bearing capacity.     

Assessment of discontinuous rock slope stability with block theory and numerical modeling: a case study for the South Pars Gas Complex,Assalouyeh, Iran

In this study, a geotechnical model has been used to analyze the stability of a discontinuous rock slope. The main idea behind block theory is that it disregards many different combinations of discontinuities and directly identifies and considers critical rock blocks known as “key blocks”. The rock slope used as a case study herein is situated in the sixth phase of the gas flare site of the South Pars Gas Complex, Assalouyeh, Iran. In order to analyze the stability of discontinuous rock slopes, geotechnical modeling which was divided into geometrical sub-modeling and mechanical sub-modeling has been utilized. This model has been established upon the KGM (key-group method) algorithm which was based on the limit equilibrium method and block theory and prepared and coded by the Mathematica software. According to the results of the stability analysis, the analyzed slope was determined to be in the category of “needs attention,” and the security level, calculated through the FORM (first-order reliability method) analysis, was estimated to be 1.16. In order to verify the model, the results obtained from the model were compared with those of the UDEC software, which is a numerical method based on distinct components. As a conclusion, it was determined that the results of the model agreed well with those of the numerical method.     

Age and tectonic setting of the Bavanat Cu–Zn–Ag Besshi-type volcanogenic massive sulfide deposit, southern Iran

The Bavanat Cu–Zn–Ag Besshi-type volcanogenic massive sulfide (VMS) deposit occurs within the Surian volcano-sedimentary complex in the Sanandaj–Sirjan zone (SSZ) of southern Iran. The Surian complex is comprised of pelite, sandstone, calcareous shale, basalt, gabbro sills, and thin-bedded limestone. Mineralization occurs as stratiform sheet-like and tabular orebodies hosted mainly by greenschist metamorphosed feldspathic and quartz feldspathic sandstone, basalt, and pelites. The basalts of the Surian complex show predominantly tholeiitic to transitional affinities, with a few samples that are alkalic in composition. Primitive mantle-normalized trace and rare earth element (REE) patterns of the Surian basalts display depletions in light REE, negative anomalies of Nb, Ta, and Ti, and positive anomalies of P. Positive P anomalies are indicative of minor crustal contamination. Furthermore, Th enrichments in the mid-ocean ridge basalt-normalized patterns of the Surian basalts are characteristic of rifted arc basalts emplaced in continental margin subduction zones. The high MgO content (>6?wt.%) of most Surian basalts and low TiO₂ content of two samples (0.53 and 0.62?wt.%) are characteristic of boninites. The aforementioned features of the basalts indicate arc tholeiites emplaced in intra-arc rift environments and continental margin subduction zones. U–Pb dating by laser ablation- inductively coupled plasma mass spectrometry of detrital zircons extracted from the host feldspathic and quartz feldspathic sandstone yields various ages that are predominantly Permian and Triassic; however, the youngest zircons give a mean Early Jurassic concordant U–Pb age of 191?±?12?Ma. This age, together with geological and petrochemical data, indicate that VMS mineralization formed in the Early Jurassic in pull-apart basins within the SSZ. These basins and the VMS mineralization may be temporally related to an intra-arc volcano–plutonic event associated with Neo-Tethyan oblique subduction.