Planned earth-based studies of the phobos material

The article describes scientific challenges in the analysis of the Phobos material that is to be returned in the Russian Phobos-Grunt space mission. Their close connection with current problems in studies of the Earth and the origin of life has been demonstrated. The most obvious up-to-date studies that are to be carried out under laboratory conditions after the soil sample is delivered to Earth are specified, and the required equipment listed.     

Observations of extrasolar planet transits with the automated telescopes of the Pulkovo Astronomical Observatory

Exoplanet observations have been performed on the automated Pulkovo Observatory telescopes. We have obtained 33 transit light curves for 16 known exoplanets and six transit observations for three exoplanet candidates discovered by the Kepler telescope. Based on our observations, we have reliably confirmed the existence of an exoplanet with an extremely large radius, R _pl = 1.83 ± 0.16R _Jup, in the system KOI 256 and detected a strong deviation of its orbital revolution from the theoretically predicted one. During the transit of the exoplanet WASP-12b across the stellar disk, we detected bursts that could be caused by the planet transit across spots on the star or by the presence of a satellite around this exoplanet. We detected possible periodic variations in the duration of the exoplanet transit across the stellar disk with time for HAT-P-12b that could be caused by variations in orbital inclination. The transit duration and depth, the central transit time, and the radius and orbital inclination of the planet have been estimated. The equilibrium temperature and albedo have been estimated for several exoplanets.     

An improved shadow measurement technique for constraining the morphometry of simple impact craters

Abstract— The lengths of the shadows cast within simple, bowl‐shaped impact craters have been used to constrain their depths on a variety of planetary bodies. This technique, however, only yields the “true” crater depth if the shadow transects the crater center where the floor is deepest. In the past, attempts have been made to circumvent this limitation by choosing only craters where the shadow tip lies very near the crater center; but this approach may introduce serious artifacts that adversely affect the slope of the regressed depth vs. diameter data and its variance. Here we introduce an improved method for deriving depth information from shadow measurements that considers three basic shape variations of simple craters: paraboloidal, conical, and flat‐floored. We show that the shape of the cast shadow can be used to constrain crater shape and we derive improved equations for finding the depths of these simple craters.     

Production of krypton and xenon isotopes in thick stony and iron targets isotropically irradiated with 1600 MeV protons

Abstract— Two spherical targets made of gabbro with a radius of 25 cm and of steel with a radius of 10 cm were irradiated isotropically with 1600 MeV protons at the SATURNE synchrotron at Laboratoire National Saturne (LNS)/CEN Saclay, in order to simulate the production of nuclides in meteorites induced by galactic cosmic‐ray protons in space. These experiments supply depth‐dependent production rate data for a wide range of radioactive and stable isotopes in up to 28 target elements. In this paper, we report results for ⁷⁸Kr, ^80–86Kr isotopes in Rb, Sr, Y and Zr and for ¹²⁴Xe, ¹²⁶Xe, ^128–132Xe, ¹³⁴Xe, ¹³⁶Xe isotopes in Ba and La. Krypton and xenon concentrations have been measured at different depths in the spheres by using conventional mass spectrometry. Based on Monte‐Carlo techniques, theoretical production rates are calculated by folding depth‐dependent spectra of primary and secondary protons and secondary neutrons with the excitation functions of the relevant nuclear reactions. The comparison of the model calculation results with experimental data in the thick target experiments performed at LNS and previously at CERN have allowed adjustments of the poorly known excitation functions of neutron‐induced reactions. Thus, for the two experiments at SATURNE, excellent agreement is obtained between experimental and calculated production rates for most Kr and Xe isotopes in all investigated target elements. Only Xe production in Ba in the gabbro is underestimated by the calculations by ?25%. This work validates the approach of the thin‐target model calculations of cosmogenic nuclide production rates in the attempt of modeling the interaction of galactic cosmic‐ray protons with stony and iron meteorites in space as well as with lunar samples.     

Workshop summary on physical and chemical properties of potential Earth impactors

Abstract— From 2001 June 17 to 25, we held the first international workshop in Erice, Italy, dedicated to the determination of geological and geophysical properties of near‐Earth objects (NEOs). The goal was to develop a roadmap for determining the physical and chemical properties of NEOs in the coming decades to meet the scientific requirements for development of Earth collision avoidance technology. We identified many properties that are desired, but four measurements are needed most critically for any potentially hazardous NEO: (1) its mass, (2) its mass distribution, (3) its material strengths, and (4) its internal structure. Global (whole‐body) properties, such as material strengths and internal structure, can be determined best from the analyses of permeating waves: artificially initiated seismology and multifrequency reflection and transmission radio tomography. Seismology provides the best geophysical (material strengths) data of NEOs composed of consolidated materials while radio tomography provides the best geological data (e.g., the state of fracture) of electrically nonconducting media. Thus, the two methods are complementary: seismology is most suitable for stony and metallic asteroids, while radio tomography is most appropriate for comet nuclei and carbonaceous asteroids. The three main conclusions are (1) remote sensing for physical characterization should be increased, (2) several dedicated NEO missions should be prepared for geophysical and geological investigations, and (3) that it is prudent to develop and prove the technology to make geophysical measurements on NEOs now.     

Mapping of Ozone and Water in the Atmosphere of Mars near the 1997 Aphelion

We present absolute abundances and latitudinal variations of ozone and water in the atmosphere of Mars during its late northern spring (L_s=67.3°) shortly before aphelion. Long-slit maps of the a¹Δ_g state of molecular oxygen (O₂) and HDO, an isotopic form of water, were acquired on UT January 21.6 1997 using a high-resolution infrared spectrometer (CSHELL) at the NASA Infrared Telescope Facility. O₂(a¹Δ_g) is produced by ozone photolysis, and the ensuing dayglow emission at 1.27 μm is used as a tracer for ozone. Retrieved vertical column densities for ozone above ∼20 km ranged between 1.5 and 2.8 μm-atm at mid- to low latitudes (30°S-60°N) and decreased outside that region. A significant decrease in ozone density is seen near 30°N (close to the subsolar latitude of 23.5°N). The rotational temperatures retrieved from O₂(a-X) emissions show a mean of 172±2.5 K, confirming that the sensed ozone lies in the middle atmosphere (∼24 km). The ν₁ fundamental band of HDO near 3.67 μm was used as a proxy for H₂O. The retrieved vertical column abundance of water varies from 3 precipitable microns (pr-μm) at ∼30°S to 24 pr-μm at ∼60°N. We compare these results with current photochemical models and with measurements obtained by other methods.     

Fresh Ammonia Ice Clouds in Jupiter: I. Spectroscopic Identification, Spatial Distribution, and Dynamical Implications

We report the first spectroscopic detection of discrete ammonia ice clouds in the atmosphere of Jupiter, as discovered utilizing the Galileo Near-Infrared Mapping Spectrometer (NIMS). Spectrally identifiable ammonia clouds (SIACs) cover less than 1% of the globe, as measured in complete global imagery obtained in September 1996 during Galileo's second orbit. More than half of the most spectrally prominent SIACs reside within a small latitudinal band, extending from 2° to 7° N latitude, just south of the 5-μm hot spots. The most prominent of these are spatially correlated with nearby 5-μm-bright hot spots lying 1.5°-3.0° of latitude to the north: they reside over a small range of relative longitudes on the eastward side of hot spots, about 37% of the longitudinal distance to the next hot spot to the east. This strong correlation between the positions of hot spots and the most prominent equatorial SIACs suggests that they are linked by a common planetary wave. Good agreement is demonstrated between regions of condensation predicted by the Rossby wave model of A. J. Friedson and G. S. Orton (1999, Bull. Am. Astron. Assoc31, 1155-1156) and the observed longitudinal positions of fresh ammonia clouds relative to 5-μm hot spots. Consistency is also demonstrated between (1) the lifetime of particles as determined by the wave phase speed and cloud width and (2) the sedimentation time for 10-μm radius particles consistent with previously reported ammonia particle size by T. Y. Brooke et al. (1998, Icarus136, 1-13). A young age (<two days) for most SIAC cloud particles is indicated. To the south, the most prominent SIACs are located to the northwest of the Great Red Spot, in a region where a westward flow of jovian air, diverted approximately 10° of latitude northward by the Great Red Spot, encounters a large eastward flow. SIACs have been observed repeatedly by NIMS at this location during Galileo's first four years in Jupiter orbit. It is speculated that due to the three-dimensional interactions of these flows, relatively large amounts of ammonia gas are steadily transported from the sub-cloud troposphere (below the ∼600-mbar level) to the high troposphere, nearly continuously forming fresh ammonia ice clouds to the northwest of the Great Red Spot.     

Fragmentation and hydration of tektites and microtektites

Abstract— An examination of data collected over the last 30 years indicates that the percent of glass fragments vs. whole splash forms in the Cenozoic microtektite strewn fields increases towards the source crater (or source region). We propose that this is due to thermal stress produced when tektites and larger microtektites fall into water near the source crater while still relatively hot (>1150 °C). We also find evidence (low major oxide totals, frothing when melted) for hydration of most of the North American tektite fragments and microtektites found in marine sediments. High-temperature mass spectrometry indicates that these tektite fragments and microtektites contain up to 3.8 wt% H₂O. The H₂O-release behavior during the high-temperature mass-spectrometric analysis, plus high CI abundances (0.05 wt%), indicate that the North American tektite fragments and microtektites were hydrated in the marine environment (i.e., the H₂O was not trapped solely on quenching from a melt). The younger Ivory Coast and Australasian microtektites do not exhibit much evidence of hydration (at least not in excess of 0.5 wt% H₂O); this suggests that the degree of hydration increases with age. In addition, we find that some glass spherules (with <65 wt% SiO₂) from the upper Eocene clinopyroxene-bearing spherule layer in the Indian Ocean have palagonitized rims. These spherules appear to have been altered in a similar fashion to the splash form K/T boundary spherules. Thus, our data indicate that tektites and microtektites that generally contain >65 wt% SiO₂ can undergo simple hydration in the marine environment, while impact glasses (with <65 wt% SiO₂) can also undergo palagonitization.