The impact of vertebrate herbivores on wetland vegetation in Atchafalaya Bay, Louisiana

Delta islands in the Atchafalaya and Wax Lake deltas in Atchafalaya Bay, Louisiana, are in an extremely dynamic successional phase. These islands initially supported large marshes dominated by the pioneering plant species Sagittaria latifolia and Sagittaria platyphylla. A general decrease in vegetated areas has occurred in the delta island marshes in the Atchafalaya Delta since about 1980, while in the Wax Lake Delta portion of the complex the vegetation still flourished. The Atchafalaya Delta provides an interesting setting for the study of herbivory because of the complex interaction of biotic and physical factors operating in this delta. We hypothesized that grazing by herbivores has a marked effect on vegetation in these developing marshes. To test this hypothesis, exclosures were erected on islands in both deltas in September 1985 and January 1986. Each set of exclosure treatments included an openly-grazed control area, an ungrazed area, an area allowing nutria grazing, and one allowing waterfowl grazing in each site. Results of the experiment, based on field sampling of vegetation, indicated decreases in plant biomass and changes in plant species composition in grazed treatments. Waterfowl and nutria reduced biomass aboul equally, but there was a more marked effect in the openly grazed areas. These findings may be extrapolated to sediment diversion areas along the Mississippi River.     

A macroscopic damage‐plastic constitutive law for modeling quasi‐brittle fracture and ductile behavior of concrete

A new phenomenological macroscopic constitutive model for the numerical simulation of quasi‐brittle fracture and ductile concrete behavior, under general triaxial stress conditions, is presented. The model is particularly addressed to simulate a wide range of confinement stress states, as also, to capture the strong influence of the mean stress value in the concrete failure mechanisms. The model is based on a two‐surface damage‐plastic formulation. The mechanical behavior in different domains of the stress space is separately described by means of a quasi‐brittle or ductile material response:

相似文献   

Artificial neural networks and nonlinear regression techniques to assess the influence of slake durability cycles on the prediction of uniaxial compressive strength and modulus of elasticity for carbonate rocks

Understanding rock material characterizations and solving relevant problems are quite difficult tasks because of their complex behavior, which sometimes cannot be identified without intelligent, numerical, and analytical approaches. Because of that, some prediction techniques, like artificial neural networks (ANN) and nonlinear regression techniques, can be utilized to solve those problems. The purpose of this study is to examine the effects of the cycling integer of slake durability index test on intact rock behavior and estimate some rock properties, such as uniaxial compressive strength (UCS) and modulus of elasticity (E) from known rock index parameters using ANN and various regression techniques. Further, new performance index (PI) and degree of consistency (Cd) are introduced to examine the accuracy of generated models. For these purposes, intact rock dataset is established by performing rock tests including uniaxial compressive strength, modulus of elasticity, Schmidt hammer, effective porosity, dry unit weight, p‐wave velocity, and slake durability index tests on selected carbonate rocks. Afterward, the models are developed using ANN and nonlinear regression techniques. The concluding remark given is that four‐cycle slake durability index (I_d4) provides more accurate results to evaluate material characterization of carbonate rocks, and it is one of the reliable input variables to estimate UCS and E of carbonate rocks; introduced performance indices, both PI and Cd, may be accepted as good indicators to assess the accuracy of the complex models, and further, the ANN models have more prediction capability than the regression techniques to estimate relevant rock properties. Copyright © 2011 John Wiley & Sons, Ltd.     

Carbonate deposition in a fluvial tufa system: processes and products (Corvino Valley – southern Italy)

In a multi‐scale approach to the study of the organic and mineral components in an active barrage‐type tufa system of southern Italy, neo‐formed deposits, in both natural depositional sites and on inorganic substrates placed in the stream for this study, were observed and compared through one year of monitoring. Dams and lobes representing the basic morpho‐facies of the deposits are composed of two depositional facies: vacuolar tufa (a mixture of phytoclastic and framestone tufa) and stromatolitic tufa (phytoherm boundstone tufa). Three petrographic components comprise both facies: micrite and microsparite, often forming peloidal to aphanitc, laminar and dendrolitic fabrics, and sparite, which occurs as isolated to coalescent fan‐shaped crystals forming botryoids or continuous crusts. All fabrics occurring in all depositional facies are organized into layers with a more or less well‐developed cyclicity, which has its best expression in stromatolitic lamination. The precipitation of all types of calcite (with Mg 1·0 to 3·2 mole % and Sr 0·5 to 0·8 mole %) takes place more or less constantly during all seasons, in spite of the low saturation state of the water (the saturation index range is 0·75 to 0·89) within the active depositional zone; the latter extends for a few hundred microns through the external surface of the deposit. The active depositional zone has a particular micro‐morphology composed of porous micro‐columns (50 to 150 μm in size), separated by interstitial channels. Mineral precipitation occurs upon both external surfaces and within internal cavities of the micro‐columns, while further point sites of precipitation occur suspended within the masses of cyanobacterial tufts. Sub‐spherical mineral units, ‘nano‐spheres’ (10 to 20 nm in diameter) are the basic biotic neo‐precipitate; they commonly form by replacing non‐living degrading organic matter and at point sites along the external surface of living cyanobacterial sheaths. Nano‐spheres agglutinate to form first rod‐shaped aggregates (100 to 200 nm) which then evolve into triads of fibres or polyhedral structures. Successively, both triads and polyhedral solids coalesce to form larger calcite crystals (mainly tetrahedrons tens of microns in size) that represent the fundamental bricks for the construction of the micro‐columns in the active depositional zone. Precipitation is attributed to the presence of a widespread biofilm that occurs in the active depositional zone; this is composed of a heterogeneous community comprising epilithic and endolithic filamentous cyanobacteria, green algae, unicellular prokaryotes, actinobacteria and fungi, with a variable amount of extracellular polymeric substances. No precipitation takes place where the biofilm is absent, indicating that the biological activities of the biofilm are crucial, with its living organisms and non‐living organic matter. Basic aggregates of neo‐precipitates do not form in association with any one particular type of organic matter substrate, but appear to be related to the seasonal temperature variation: polyhedral micro‐crystals mainly precipitate in the colder season, short triads in the intermediate seasons, and long triads in the warmest conditions. These three basic crystal aggregates have a petrographic counterpart, respectively, in the spar, microspar and micrite.     

Micro- and nano-textural evidence of Ti(–Ca–Fe) mobility during fluid–rock interactions in carbonaceous lawsonite-bearing rocks from New Zealand

Understanding the mobility of chemical elements during fluid–rock interactions is critical to assess the geochemical evolution of a rock undergoing burial and metamorphism and, more generally, to constrain the geochemical budget of the subduction factory. In particular, determining the behavior and mobility of Ti in aqueous fluids constitutes a great challenge that is still under scrutiny. Here, we study plant fossils preserved in blueschist metasedimentary rocks from the Marybank Formation (New Zealand). Using scanning and transmission electron microscopies (SEM and TEM), we show that the carbonaceous material (CM) composing the fossils contains abundant nano-inclusions of Ti- and Fe-oxides. These nanocrystals are mainly anatase, rutile, and Fe–Ti oxides. The mineral composition observed within the fossils is significantly different from that detected in the surrounding rock matrix. We propose that Ti and Fe might have been mobilized by the alteration of a detrital Ti–Fe-rich protolith during an early diagenetic event under acidic and reducing conditions. Aqueous fluids rich in organic ligands released by the degradation of organic matter may have been involved. Moreover, using mass balance and petrological observations, we show that the contrasted mineralogy between the rock matrix and the fossil CM might be the consequence of the chemical isolation of fossil CM during the prograde path of the rock. Such an isolation results from the early formation of quartz and Fe-rich phyllosilicate layers enclosing the fossil as characterized by SEM and TEM investigations. Overall, this study shows that investigating minerals associated with CM down to the nanometer scale in metamorphic rocks can provide a precious record of early prograde geochemical conditions.     

Age of the Ust’-Gilyui sequence in the Stanovoi Complex of the Selenga-Stanovoi Superterrain, Central Asian fold belt

According to the results of U-Pb geochronological investigations, the age of the amphibolite protoliths (metabasalts) in the Ust??-Gilyui sequence within the Stanovoi Complex of the Amazar-Gilyui structural and formational zone in the Selenga-Stanovoi Superterrain of the Central Asian fold belt can be estimated at 193 ± 1 Ma. The Nd model age of the Ust??-Gilyui metasedimentary rocks is in the interval of t _Nd(DM) = 1.1?C3.1 Ga. This information along with the previously obtained geochronological data are indicative of the fact that the Ust??-Gilyui sequence consists of metasedimentary and metavolcanic rocks of various ages: (1) volcanic rocks with the age of 193 ± 1 Ma; (2) metasedimentary and metavolcanic rocks broken through by the Paleozoic granitoids dated to 370 Ma and characterized by minimum estimations of t _Nd(DM) = 1.1 Ga, i.e., rocks with an age of 1.1?C0.4 Ga. In addition, it is quite possible that this sequence also includes more ancient rocks. The SSS Amazar-Gilyui structural and formational zone is likely to be a tectonic mélange composed of the metasedimentary and metavolcanic rocks of the Mesozoic and, probably, Paleozoic and Early Precambrian ages. The studied zone was formed in the Mesozoic, most likely, in the course of the collision processes initiated by the closing up of the Mongol-Okhotsk Ocean.     

Challenges of an integrated water resource management for the Distrito Federal, Western Central Brazil: climate, land-use and water resources

Land-use/cover change (LUCC) and climate change are major controlling factors for water resources in the Distrito Federal in Western Central Brazil. Dynamic LUCC in the region has severe impacts on water resources, while climate changes during the last three decades is thought to have only moderate effects. LUCC affects water quantity mostly during base flow conditions. River basins with substantial expansion of agriculture since the end 1970s show a dramatic decrease of base flow discharge by 40?C70%, presumably due to irrigation. In contrast, the effects of urbanization on runoff are less distinct, since factors controlling runoff generation might be more variable. For water quality, we found urban areas to have a strong influence on the parameters CSB, NH₄ ⁺, and suspended solids. In addition, we assume emerging pollutants, e.g. organic (micro)pollutants, might play a major role in the future. The project IWAS-áGUA DF focuses on creating the scientific base to face these problems in frame of an IWRM concept for the region. Results of our study will be a contribution to an IRWM concept for the Distrito Federal and will help to maintain high standards in water supply for the region.     

Implications of chloride-enhanced cadmium uptake in saline agriculture: modeling cadmium uptake by maize and tobacco

Chloride salinity has been strongly related to enhanced cadmium (Cd) uptake by plants due to increased solubility in the soil solution, even in agricultural soil with very low levels of cadmium. This finding is relevant because the cadmium content of food crops is an important concern for human health. Therefore, the aim of this study was to predict and discuss the chlorine-enhanced uptake of cadmium by two common crops: maize and tobacco under ??non-saline?? (1?mM) and ??very strongly saline?? (200?mM) scenarios using a modified ??biotic ligand model?? and datasets from a set of soil and hydroponic experiments. Results indicated that predicted cadmium uptake rates (expressed as cadmium in plant ??mol?m^?2 root) by maize and tobacco plants were consistently higher (54 and 15%, respectively) assuming conditions of ??very strong salinity?? soil compared to the simulated ??non-saline?? soil. In the light of the results of the present research, valuable information is given on modeled cadmium phytoavailability as an indication of the potential risk due to increased cadmium uptake by crops under saline conditions, especially as the enhancement of cadmium uptake in the presence of Cl^? salinity may be a general trend that occurs in many edible crops. The biotic ligand model parameterization applied in the present study attempted to simulate conditions commonly found in natural cadmium and salt-affected soils. However, caution is needed to extrapolate results obtained from these models to real soil conditions.     

The significance of incompatible elements in mid-Atlantic ridge basalts from 45°N with particular reference to Zr/Nb

K, Rb, Ba, Sr, Y, Zr and Nb have been determined in samples of MORB (mid-ocean ridge basalt) from the mid-Atlantic ridge at 45 °N by X-ray fluorescence spectrometry. This suite is characterised by higher concentrations of K, Rb, Ba and Nb (and lower K/Rb, K/Ba and Zr/Nb) than low-K tholeiites (typical MORB) previously described in the literature. Available data from other sources also shows that the 45 °N suite has higher Cs and U contents, rare earth-patterns enriched in the light REE, and higher ⁸⁷Sr/⁸⁶Sr ratios relative to typical MORB. The inter-element and isotopic ratios of typical MORB have been previously interpreted to imply that these samples have been derived from source areas which have undergone earlier differentiation and/or melting episodes. The 45 °N MORB samples are considered to be derived from more primitive or relatively undepleted mantle. It is noteworthy that these samples have inter-element ratios very similar to those obtained for oceanic island basalts associated with the mid-ocean ridges.The significance of the relative enrichment or depletion of Nb in MORB has not been previously noted and the use of the Zr/Nb ratio to illustrate these effects is emphasised. The abundances of Zr and Nb are apparently unaffected by sea-water alteration and thus the Zr/Nb ratio is potentially a more useful measure of depletion than ratios involving K and Rb, which are very sensitive to sea-water alteration. Brief mention is made of the variation of Zr/Nb in other MORB samples to demonstrate the existence of varying degrees of depletion in the respective source areas of these samples.