Cross-Calibration and Long-Term Monitoring of the Microwave Radiometers of ERS, TOPEX, GFO, Jason, and Envisat

The radiometers on board the satellites ERS-1, TOPEX/Poseidon, ERS-2, GFO, Jason-1, and Envisat measure brightness temperatures at two or three different frequencies to determine the total columnal water vapor content and wet tropospheric path delay, a major correction to the altimeter range measurements. In order to asses the long-term stability of the path delay, the radiometers are calibrated against vicarious cold and hot references, against each other, and against several atmospheric models. Four of these radiometers exhibit significant drifts in at least one of the channels, resulting in yet unmodeled errors in path delay of up to 1 mm/year, thus limiting the accuracy at which global sea level rise can be inferred from the altimeter range measurements.     

Longitudinal strength of a high-speed ferry

The longitudinal strength of the high-speed ferry was investigated by subjecting the ship's hull girder to long-term loads obtained from a frequency-domain panel code. Prior to the statistical analysis, linearly computed transfer functions were corrected for nonlinear effects, yielding two sets of transfer functions valid for different wave amplitudes. One set corresponded to the hogging condition; the other set, to the sagging condition. Two regular equivalent design waves were specified that resulted in loads representing the most severe global design load conditions. The still-water loading condition, yielding a still-water vertical bending moment in hogging, was superimposed on the wave-induced loads to obtain the total (design) loads in hogging. For the sagging condition only, additional impact-related loads were superimposed to obtain the total (design) loads in sagging. A finite element model of the ship's structure was subjected to pressure distributions according to the two regular design waves. For comparison with classification society rule values, a simple beam theory strength analysis of the ship's midship section was performed first, and then another finite element analysis was carried out, whereby the imposed loads were tuned to the rule values of vertical bending moments. Rule-based magnitudes of nominal maximum longitudinal stress deviated significantly (25–39%) from comparable stresses obtained by the panel code based finite element analysis. However, stresses obtained from the rule-based finite element analysis agreed more favorably, especially in hogging. In the uppermost deck, for example, the panel code based compressive stress was only 9% larger than the comparable stress from the rule-based finite element analysis.     

Geology of the Continental Margin of Enderby and Mac. Robertson Lands, East Antarctica: Insights from a Regional Data Set

In 2001 and 2002, Australia acquired an integrated geophysical data set over the deep-water continental margin of East Antarctica from west of Enderby Land to offshore from Prydz Bay. The data include approximately 7700 km of high-quality, deep-seismic data with coincident gravity, magnetic and bathymetry data, and 37 non-reversed refraction stations using expendable sonobuoys. Integration of these data with similar quality data recorded by Japan in 1999 allows a new regional interpretation of this sector of the Antarctic margin. This part of the Antarctic continental margin formed during the breakup of the eastern margin of India and East Antarctica, which culminated with the onset of seafloor spreading in the Valanginian. The geology of the Antarctic margin and the adjacent oceanic crust can be divided into distinct east and west sectors by an interpreted crustal boundary at approximately 58° E. Across this boundary, the continent–ocean boundary (COB), defined as the inboard edge of unequivocal oceanic crust, steps outboard from west to east by about 100 km. Structure in the sector west of 58° E is largely controlled by the mixed rift-transform setting. The edge of the onshore Archaean–Proterozoic Napier Complex is downfaulted oceanwards near the shelf edge by at least 6 km and these rocks are interpreted to underlie a rift basin beneath the continental slope. The thickness of rift and pre-rift rocks cannot be accurately determined with the available data, but they appear to be relatively thin. The margin is overlain by a blanket of post-rift sedimentary rocks that are up to 6 km thick beneath the lower continental slope. The COB in this sector is interpreted from the seismic reflection data and potential field modelling to coincide with the base of a basement depression at 8.0–8.5 s two-way time, approximately 170 km oceanwards of the shelf-edge bounding fault system. Oceanic crust in this sector is highly variable in character, from rugged with a relief of more than 1 km over distances of 10–20 km, to rugose with low-amplitude relief set on a long-wavelength undulating basement. The crustal velocity profile appears unusual, with velocities of 7.6–7.95 km s⁻¹ being recorded at several stations at a depth that gives a thickness of crust of only 4 km. If these velocities are from mantle, then the thin crust may be due to the presence of fracture zones. Alternatively, the velocities may be coming from a lower crust that has been heavily altered by the intrusion of mantle rocks. The sector east of 58° E has formed in a normal rifted margin setting, with complexities in the east from the underlying structure of the N–S trending Palaeozoic Lambert Graben. The Napier Complex is downfaulted to depths of 8–10 km beneath the upper continental slope, and the margin rift basin is more than 300 km wide. As in the western sector, the rift-stage rocks are probably relatively thin. This part of the margin is blanketed by post-rift sediments that are up to about 8 km thick. The interpreted COB in the eastern sector is the most prominent boundary in deep water, and typically coincides with a prominent oceanwards step-up in the basement level of up to 1 km. As in the west, the interpretation of this boundary is supported by potential field modelling. The oceanic crust adjacent to the COB in this sector has a highly distinctive character, commonly with (1) a smooth upper surface underlain by short, seaward-dipping flows; (2) a transparent upper crustal layer; (3) a lower crust dominated by dipping high-amplitude reflections that probably reflect intruded or altered shears; (4) a strong reflection Moho, confirmed by seismic refraction modelling; and (5) prominent landward-dipping upper mantle reflections on several adjacent lines. A similar style of oceanic crust is also found in contemporaneous ocean basins that developed between Greater India and Australia–Antarctica west of Bruce Rise on the Antarctic margin, and along the Cuvier margin of northwest Australia.     

Environmental change and oyster colonization within the Hudson River estuary linked to Holocene climate

Geophysical mapping and sampling data provide a record of changing environmental and faunal conditions within the Hudson River estuary during the mid- to late Holocene. On the shallow, broad marginal flats of the mesohaline Hudson, fossil oyster beds (Crassostrea virginica) are found exposed on the river bottom and buried by sediment. The shallowest beds are well imaged in chirp sub-bottom and side-scan sonar data and form discrete flow-perpendicular bands, 0.6–1.0 km wide and up to 3 km long, which cover 30% of the river bottom. Radiocarbon-dated sediment cores indicate oysters thrived within two time periods from ~500–2,400 and ~5,600–6,100 cal. years b.p. Sediment and physical property data indicate a changing depositional regime consistent with the oyster chronology. Similar changes in oyster presence are found in local shell midden sites of the Lower Hudson Valley as well as elsewhere along the Atlantic coast, and may reflect climatic controls associated with warm–cool cycles during the Holocene. Oysters flourished during the mid-Holocene warm period, disappeared with the onset of cooler climate at 4,000–5,000 cal. years b.p., and returned during warmer conditions of the late Holocene. The most recent demise of oysters within the Hudson at 500–900 cal. years b.p. may have accompanied the Little Ice Age.     

Analysis of medaka cytochrome P450 3A homotropic and heterotropic cooperativity

We have previously demonstrated that medaka CYP3A is associated with metabolism of several endobiotics including steroids and bile acids. In this study, we demonstrate that medaka CYP3A catalysis exhibits unusual kinetic behaviors consistent with allosteric interaction which cannot be described by hyperbolic kinetic models. Using 7-benzyloxy-4-(trifluoromethyl)-coumarin (BFC) and nonylphenol as CYP3A substrates, we describe both homotropic and heterotropic cooperative interactions. Given the role of CYP3A in maintaining the homeostatic balance for numerous endobiotics, enzymatic activation/inhibition by endocrine disruptors (EDCs) represents a putative (non-genomic) mechanism for endocrine disruption.     

Development of two novel CYP-antibodies and their use in a PCB exposure experiment with Mytilus edulis

In an attempt to learn more about the cytochrome P450 (CYP) system of mussels, we used protein databases and alignment software to extract highly conserved CYP sequences. From these alignments synthetic peptides were produced and used for rabbit immunisation, which yielded polyclonal antibodies against the CYP families 2 and 4. The antibodies were evaluated with Western Blot and ELISA assays, using digestive gland microsomal samples from the mussel Mytilus edulis. Western Blots revealed immunoreactions for both antibodies. The anti-CYP2 sequence rendered one major immunopositive protein of ≈49 kDa size, and weak signals for proteins of ≈41 and 56 kDa size. The anti-CYP4 sequence rendered two major bands of ≈56 and 59 kDa size, and also a weak immunoreaction with a protein of ≈43 kDa size. ELISA rendered only weak signals even with a 1:50 dilution of IgG-purified serum. A 10-day exposure to Aroclor 1254 did not appear to affect any of the immunopositive proteins, while total PCBs in soft bodies increased from 14–40 ng/g DW in controls to 373–638 ng/g DW in exposed mussels.     

Simulating a heavy metal spill under estuarine conditions: Effects on the clam Scrobicularia plana

We describe the effect of heavy metals Zn, Cd, Pb and Cu on the induction of methallothioneins on the clam Scrobicularia plana along a salinity gradient simulated under laboratory conditions. The clams were exposed to constant heavy metal concentrations in a dynamic estuary simulator during a 15-day assay to investigate possible induction of metal-binding proteins in them. The concentration of heavy metals in water was analysed. Clams were analysed for methallothionein concentrations. The speciation of Zn, Cd, Pb and Cu along the salinity gradient was modelled. Zn showed the highest concentrations and its prevalent species was the free ion. Intersite differences have been observed in methallothionein concentration and related to the salinity gradient. It seems that synthesis of methallothioneins is the result of physiological forces acting in concert with the changes in the chemical speciation of metals, owing to the trace metals uptake is controlled by means of an interaction of physiology and physicochemistry.