P- and S-wave anisotropy of a synthetic sandstone with controlled crack geometryl1

A method is reported for the production of synthetic porous sandstones containing cracks of known dimensions and geometry with respect to the matrix. A synthetic sandstone was manufactured from Sand cemented with an epoxy glue. The cracks of known geometry were introduced into the material in the manufacturing stage, by emplacing thin metallic discs in the Sand-epoxy matrix. These discs were chemically leached out of the consolidated porous sandstone. Acoustic anisotropy. and shear-wave splitting were observed in the synthetic sandstones. For the dry sample the observed angular dependence of the P- and S- wave velocities (at 100 kHz) compares well, qualitatively, with the theoretical models of Hudson and of Thomsen. Quantitatively, however, the experimental data fits Hudson's model better. For the case of a saturated sample the experimental results are in excellent agreement with Thomsen's model. Hudson's model, on the other hand, predicts a different angular dependence for P-waves. This demonstrates that the concept of fluid transfer between cracks and the ambient porosity can be a significant process. The results reported here are from the first successful experiment in which the theoretical models were tested on a porous material containing a known crack geometry.     

Source investigation of a small event using empirical Green's functions and simulated annealing

We propose a two-step inversion of three-component seismograms that (1) recovers the far-field source time function at each station and (2) estimates the distribution of co-seismic slip on the fault plane for small earthquakes (magnitude 3 to 4). The empirical Green's function (EGF) method consists of finding a small earthquake located near the one we wish to study and then performing a deconvolution to remove the path, site, and instrumental effects from the main-event signal.
The deconvolution between the two earthquakes is an unstable procedure: we have therefore developed a simulated annealing technique to recover a stable and positive source time function (STF) in the time domain at each station with an estimation of uncertainties. Given a good azimuthal coverage, we can obtain information on the directivity effect as well as on the rupture process. We propose an inversion method by simulated annealing using the STF to recover the distribution of slip on the fault plane with a constant rupture-velocity model. This method permits estimation of physical quantities on the fault plane, as well as possible identification of the real fault plane.
We apply this two-step procedure for an event of magnitude 3 recorded in the Gulf of Corinth in August 1991. A nearby event of magnitude 2 provides us with empirical Green's functions for each station. We estimate an active fault area of 0.02 to 0.15 km² and deduce a stress-drop value of 1 to 30 bar and an average slip of 0.1 to 1.6 cm. The selected fault of the main event is in good agreement with the existence of a detachment surface inferred from the tectonics of this half-graben.     

Reproductive biology of Spondias tuberosa Arruda (Anacardiaceae), an endemic fructiferous species of the caatinga (dry forest), under different management conditions in northeastern Brazil

In areas under different management conditions (management units, MUs) located either on a slope or at the base of a slope and either in a plantation or in a pasture, we compared the flower and fruit production, floral visitors, visitation rates and pre-emergent reproductive success (PERS) of Spondias tuberosa (Anacardiaceae) in an area of dry forest in NE Brazil. Individuals in the plantation MU produced more flowers per inflorescence than those in other MUs, but there were no statistical differences in mean fruit set among MUs. The only difference in mean visitation rates was between the plantation (65.83 ± 38.49) and the slope sites (11.5 ± 12.8). We observed visits by 19 insect species, including bees (31.6%), butterflies (31.6%), wasps (26.3%) and flies (10.5%). A clustering analysis based on the number of visits showed that a) the plantation site is most different from the other MUs, b) the pasture and the site at the base of the slope are similar to the slope site, and c) the higher frequency of visits of pollinators in the plantation MU was responsible for these differences. Of the 19 species of insects visiting the flowers, 12 were considered pollinators. The pollinator similarity analysis indicated a clear separation between areas and suggested that human activity has resulted in the replacement of native pollinators by exotic species. However, these changes apparently have not affected the pre-emergent reproductive success of S. tuberosa. Our results show that plant reproductive biology in semi-arid ecosystems may be modified by human action and that changes in floral production and pollinator guilds are the most conspicuous effects. However, the traditional management performed by local people may not affect the reproductive success of plant species.     

Use of Factor Analysis to Study the Distribution of Metalliferous Bauxitic Tailings in the Seabed of the Gulf of Corinth,Greece

In 1994, a detailed marine environmental survey was carried out in surface sediments of the northern flank (Antikyra Bay) and the basin floor of the Gulf of Corinth. Metalliferous tailings (red-mud slurry) of a bauxite processing plant are discharged through a pipeline at a water depth of 100 m, in the Antikyra Bay, covering an area of 16 km². The bauxitic tailings are detached from the main deposit at the outfalls, flow as turbidity currents downslope, and are redeposited on the basin floor of the Gulf of Corinth, where they cover an area of about 277 km². One hundred sediment samples, that were collected from red-mud deposits and the surrounding natural sediments, were analyzed for Ag, Al, Cd, Co, Cr, Cu, Fe, Hg, Mg, Mn, Ni, Pb, Si, Ti, V, and Zn concentrations. Statistical analysis of the heavy metals concentrations using factor analysis allowed (i) an examination of the interrelations among metals and (ii) distinguishing possible sample groups on the basis of metal concentrations in order to study the mechanisms of transport of the red mud and the degree of mixing with natural sediments. Factor 1 (Al, Cr, Ti, Fe, Co, Ni, Pb, Ag, Hg, V, Cd, and Cu) and the positive pole of Factor 2 (Cu, Ag, Cd, and Hg) are red-mud factors, reflecting different metal behaviors, which are related to processes that take place during the transport and redeposition of the red mud. The negative poles of Factors 2 and 3 and the positive pole of Factor 4 are related to natural sediment supply processes. Q-mode factor analysis identifies three distinct sediment groups located in different areas, on the base of the degree of mixing of red mud with natural sediments.     

THREE-WAY METHODS FOR THE CALIBRATION OF CHROMATOGRAPHIC SYSTEMS:COMPARING PARAFAC AND THREE-WAY PLS

For the calibration of chromatographic systems,different methods can be used.One class of methodsutilizes three-way approaches.The calibration problem is stated in such a way that the decompositionof a three-way array can serve for the prediction of retention on new stationary phases.Two three-way approaches are presented:the Unfold-PCA and PARAFAC models.The theory ofboth methods is presented and the differences are highlighted,the main difference being that PARAFACis a trilinear decomposition whereas Unfold-PCA is not.Both three-way methods are evaluated on asmall data set consisting of retention measurements of eight solutes at six mobile phase compositions onsix stationary phases.The differences in performance of the two models are minor,For calibration purposes,two variants of the methods are discussed:three-way PLS and an extensionof PARAFAC.Again the theory and differences between the two methods are explained.The predictiveperformance of the two methods is compared using the same data set as earlier.The differences inpredictive performance,however,are minor.Both methods are capable of predicting 98% of thevariation in the test sets.Yet,there are other considerations when comparing methods than predictiveperformance,e.g.the quality of the predictions.     

The neotectonics and geodynamics of the Lower Oka Region (East European Craton)

The neotectonic structures of the Lower Oka (Nizhneokskii) Region formed under different geodynamic conditions. This is attested by the morphology, orientation, internal structure, and jointing of the structures. The Oka-Tsna arc formed under the effect of tension from an inner source on the one hand and stress from the Alpian belt on the other hand. The latitudinally-oriented structures of the northwestern slope of the Tokmovo arc emerged as a result of uplift and widening. Both types of structure are combined within the limits of the Oka-Murom trough, which is a geodynamically active zone.