昭通示范区黄金坝气田五峰—龙马溪组页岩气储层地质特征

昭通国家级页岩气示范区黄金坝气田是继礁石坝和长宁—威远之后中国又一个在页岩气勘探、开发领域实现重大突破的地区,为了系统地展示黄金坝气田页岩气资源富集的储层条件,为未来的勘探工作提供参考,以五峰—龙马溪组页岩气储层为研究对象,从区域地质条件、储层岩石学、物性和地球化学4个方面对该页岩气储层进行了综合研究。结果表明稳定的区域构造和良好的顶底板条件是黄金坝地区页岩气资源富集的关键,良好的保存条件使储层维持了较高的压力(压力系数1);较高的孔隙度(平均4%)和TOC含量(目的层2%)提供了良好的储集空间,使储层具有较高的含气量(1.35~3.48 cm3/g,平均2.50 cm3/g);天然气地球化学数据表明,区内天然气主要成分为CH4(97%),其次还含有少量的C2H6、C3H8和CO2;天然气同位素数据表明烃类C同位素组成发生了倒转,表明储层具有良好的封闭性。但储层孔隙系统较为复杂,且非均质性极强,从而导致渗透率较低,在储层改造施工过程中应予以充分考虑。总体上,黄金坝气田具有较好的开发前景,生产测试表明,区内直井压裂产量为0.5×104~3.5×104m3/d/井,水平井压裂产量可达12×104~40×104m3/d/井。     

云南建水腊里河超基性岩地质特征及其构造意义

川滇黔等地在二叠世晚期发生峨眉山玄武岩短期内大规模溢流喷发。滇西地区发育的镁铁—超镁铁质岩均被认为是峨眉山大火成岩省的产物,但在滇东地区却一直缺少该类岩石组合的报道。本文在滇东建水地区首次发现了腊里河超基性岩体,通过LA-ICP-MS锆石UPb定年分析表明该超基性岩先期形成年龄为(246±5.2)Ma,为晚二叠-早三叠世的产物,后期中侏罗世晚期(169.6±2.0)Ma(MSWD=3.5)发生岩浆活化。该超基性岩Mg#值平均为78.73,稀土元素表现出略微右倾的平坦型特征,Rb、Sr、Ba、Pb等大离子亲石元素相对富集,高场强元素Zr、Hf相对亏损,Ta异常富集。其地化特征表现出富集型地幔源区特征,与峨眉山玄武岩成因关系密切。晚二叠世建水地区由于地幔柱活动形成地表溢流玄武岩,在深部岩浆房由玄武质岩浆结晶分异作用形成超基性侵入岩,到中侏罗世晚期,伴随着华南地区发生多期次构造运动,先前存在于岩浆房中的超镁铁质岩经过后期热液改造活化,沿着断层裂隙侵入地表。     

涉及埃达克岩实验的若干基本概念与问题辨析

根据热力学原理,部分熔融是相变的一种表现形式。当岩石沿p-T轨迹穿过固相线时即可发生熔融。自然界岩石常见的不一致熔融行为可以导致残留相具有不同于源岩的整体成分与矿物组合。残留相与源岩可以属于不同的变质相,岩性也可以不同。"C型埃达克岩"含有含水矿物,它们不是干体系熔融的产物。实验岩石学研究表明,基性成分(SiO_250%)体系较中性、酸性体系在1.0~2.0 GPa压力条件下失水熔融时更易于形成"榴辉岩质"的残留相。源岩除SiO_2以外的其它主要氧化物会影响残留相中各矿物的比例,进而影响熔体的Sr、Y及HREE含量。因此,"C型埃达克岩"高Sr低HREE特征的形成取决于熔融温压条件以及源岩的主量元素、微量元素组成等多重因素。高钾含量(K_2O≈1.0%)的基性、中基性源岩形成的熔体成分与"C型埃达克岩"相比过于富Al或富Na。中等富钾的基性源岩的低程度熔融可以形成高硅的"C型埃达克岩",但无法形成中性的"C型埃达克岩"。     

云南建水煌斑岩年代学和地球化学及其构造意义

华南大陆内部燕山期的岩浆事件可分为2期:燕山早期180~150 Ma,燕山晚期140~80 Ma。而处于扬子板块西南缘的滇黔贵等地,仅见有第二期晚白垩世中酸性侵入岩与相关成矿作用,缺乏第一期岩浆活动的时间记录。本文在滇东建水地区首次发现了麦地村煌斑岩,对其进行高精度LA-ICP-MS锆石U-Pb定年和主微量元素测试分析。结果显示煌斑岩的锆石U-Pb年龄为(158.4±2.4)Ma(MSWD=4.2),为晚侏罗世的产物,补充了该区较为空白的第一期岩浆热事件。麦地村煌斑岩不相容元素明显高于原始地幔,表现出不同程度的富集,大离子亲石元素Rb、Ba、Ce等富集程度不明显,高场强元素中U、Ta、Pb等表现出一定程度富集,LREE相对富集,HREE相对亏损,不具有Nb-Ta-Ti负异常的俯冲型配分曲线特征,具有明显的OIB型洋岛玄武岩稀土元素配分特征,为板内伸展环境下的产物。滇东地区发育中生代时期的NNE构造,早期NNE向褶皱叠加有后期同方向正断层。早期褶皱表现为SEE-NWW挤压应力作用下的构造特征,后期断层表现出同方向张应力作用下的特征。煌斑岩正是由于该区发生挤压之后伴随着一期应力松弛调整,伸展减压作用诱发地幔物质部分融熔,来自于深处的软流圈地幔流体与岩石圈地幔发生交代作用,形成富集型地幔,交代富集的岩石圈地幔局部受热、部分熔融,发生上升侵位。煌斑岩的侵位时间即是滇东地区中生代从挤压向伸展转换的起始时间。     

仿生高效切削齿试验研究

在仿生高效耐磨理论的指导下,以鼹鼠爪趾为仿生原型,引入了其经长期进化而具有的高效、耐磨的特性。选用CVD多晶金刚石为切削齿的切削单元,采用真空热压烧结工艺制备仿生高效切削齿,并将其与常规PDC齿、仿生PDC齿的耐磨性和切削效率进行对比试验,结果显示：仿生高效切削齿的耐磨性较常规PDC齿提高23%;切削效率较常规PDC齿提高1.49倍,较仿生PDC齿提高48%。初步证明了仿生高效切削齿工艺的可行性,为下一步高效切削钻头的研究奠定了坚实的基础。     

Recognition of the early permian volcanic rocks and Its geological significance in chifeng region of inner Mongolia北大核心CSCD

In order to investigate the geological significance of the large area of volcanics in the Uplift bell of Mingshan in western Chifeng,When carrying out the I :5 million regional mineral geological survey in the area,Through the research work of field geology investigation, petrology, LA-1CP-MS zircon U-Pb isotopic dating and regional stratigraphic correlation and so on.Found that the volcano rocks in the area is different from the Late Jurassic-Early Cretaceous volcanic rocks. And the obvious green alteration phenomenon was developed : The dating results of the Hornblende andesite in the lower parts is 273. 6±2. 2 Ma,it should belong to the Permian Elitu formation^ The Volcanics in the area belong to Calc-Alkaline-high-k calc-Alkaline series volcanic rocks. And volcanic magma experienced the separation and crystallization of minerals, it was the product of the continuous evolution of cognate magma, having the Characteristics that from bottom to top Intermediate-Mafic to Acidic magmatic evolution and the REE content increased gradually 0 Studies suggest that the Formation of volcanic rocks in the area is related to the ancient Asian Ocean to the North China block subduction in the Late Paleozoic period . It should be formed in the Archean to Proterozoic crystalline basement and late devonian magma Kemelting eruption, the tectonic environment formation of the volcanics in this area was andreessen arcc.     

Rainfall over Oman and its teleconnection with El Niño Southern Oscillation

The Sultanate of Oman is located in the south-eastern part of the Arabian Peninsula and covers the larger part of the southern coasts of the Arabian Peninsula in both arid and semi-arid environments except for the southern part which is swept by the monsoon affecting the Arabian Sea during the period from June to September. The summer rainfall over Oman shows year-to-year variability, and this is caused by oceanic and atmospheric influences. In the present study, we tried to explore the influence of El Niño on the rainfall over Oman using different data sets. The empirical orthogonal function (EOF) technique employed to the zonal wind at 850 hPa for the 30-year period shows that the second and third modes of EOF are showing high variability over the Oman regions. The corresponding PCs were subjected to FFT analysis, and it showed a peak about 5–6 years. In addition to this, the zonal wind over the Oman regions is correlated with the global zonal wind and found a significant correlation (1 % significant level). It has already been proved that the wind and rainfall during summer monsoon is in phase. Moreover, the spectral analysis of rainfall at Masirah station and the Niño3.4 index show the similar mode of variability indicating a direct relationship. The correlation between rainfall and the Niño3.4 index is also showing a positive significant value, and therefore, it can be concluded that the El Niño in the Pacific favours rainfall over the Oman region.     

Multichannel analysis of surface waves (MASW) for seismic site characterization using 2D genetic algorithm at Bahrah area,Wadi Fatima,Saudi Arabia

The present study deals with the seismic site classification of Bahrah area, Wadi Fatima, to characterize the local site conditions. The dynamic behavior of sediments was studied by the application of surface wave inversion. The multichannel analysis of surface waves (MASW) shallow geophysical technique was utilized for site classification. MASW survey was carried out at 66 sites along with 13 seismic refraction profiles at suitable localities. MASW and seismic refraction profiles were processed and compared with the available borehole data. The integration of MASW techniques with seismic refraction and borehole data progressively enhanced the subsurface visualization and reliability of the shear wave velocity estimation in the subsurface in the study area. The subsurface shear-wave velocity model was achieved by the solution of an inverse problem-based dispersion of surface waves and propagation in a vertically heterogeneous medium. The 2D genetic algorithm was employed for the inversion of dispersion curves to obtain velocity and thickness of subsurface layers. The depth to engineering bedrock and velocity of shear waves in the first 30 m was deciphered and mapped. The depth of bedrock in study area varies from 4 to 30 m, and V _{S 30} ranges from 320 to 800 m/s. The most of study area falls in B and C class categories in addition to few sites of D class according to the NEHRP guidelines.     

Assessing groundwater storage changes in the Nubian aquifer using GRACE data

Gravity Recovery and Climate Experiment (GRACE) level two (L2) data is used in estimating the groundwater storage changes (GWSC) in the Nubian Sandstone Aquifer System (NSAS). This set of data consists of spherical harmonics coefficients with specific degree and order. The GRACE data is de-correlated using a sixth degree polynomial in order to reduce the effect of the noise error resulting from the correlation between the spherical harmonics coefficients with the same degree parity. The GRACE estimates of GWSC are smoothed using Gaussian filter with half width of 1000 km. This half width is chosen in order to maximize the correlation between the GRACE estimates of GWSC and previous modeling results of the NSAS. The loss in groundwater storage occurring in each of the four countries sharing the NSAS is calculated to assess the sustainability of using the NSAS as a water resource in each country. The overarching finding in this study is that NSAS is losing its groundwater storage at a very high rate. Also, it is found that Egypt is the fastest in losing its groundwater storage from the NSAS. This loss of groundwater storage in Egypt may not necessarily be resulting from in-country extractions because of the trans-boundary nature of this aquifer. The GRACE-based estimates are found to be close to available data and previous modeling results of the NSAS.     

Detachment folding in a Lower Cambrian–Upper Permian karst reservoir: 3D model of the Yubei 3D area (eastern Markit Slope,Tarim Basin,Northwest China)

A three-dimensional (3D) structural modeling of the Lower Cambrian–Upper Permian Yubei 3D area was performed to understand its structural evolution. This model reproduces the present-day structure of the basin and comprises 11 horizons within Lower Cambrian to Upper Permian rocks. The analysis is based on 3D depth views and faults. The results image salt movements due to tectonics and/or burial. From these observations, this paper deduces that salt structures are correlated to the main faults and tectonic events. From the model analysis, we interpret the timing and geometry of Tarim Basin tectonics. The fault geometry can be resolved based on the strike of the fault, the morphology of hanging wall strata, and the stratigraphic distribution. Emphasis is placed on gypsum rock detachment, considering its movements during the Middle Caledonian event and decoupling effects during tectonic evolution. Moreover, we point to the structural control of the Paleozoic basement and the crustal architecture (Yubei 3D Zone) on the geometry of the Tarim Basin.