The Blasting Test and Blasting Vibration Monitoring of Vertical Crater Retreat Mining Method in the Luohe Iron Mine

Because the land requisition and demolishing became difficult more and more, the mining scheme of Luohe iron mine was changed from caving method to filling method. In order to ensure the safety of the residence and the underground tunnel cavern within the mobile belt of the underground mining, the Luohe iron mine did the blasting test on the vertical crater retreat mining method and blasting vibration monitoring. The blasting experiments use common emulsified oil explosives and non-electric initiation system. The way of caved ore adopts the cutting groove and bench side. The NUBOX-6016 intelligent vibration monitor was chosen in the blasting vibration monitoring. Twice experiments on the blasting vibration monitoring were done on the surface or in the underground refuge cavern. The first test select the three monitoring points on the ground and the second select two monitoring points on the ground and a monitoring point in the underground refuge cavern. The blasting vibration monitoring data were conducted by the regression analysis in the Sodev’s empirical formula. The vibration attenuation formula about the underground blasting vibration transmitting in three directions is derived. The blasting test on the vertical crater retreat mining method and the blasting vibration were analyzed. It is estimated if the vibration damage possibly the surface buildings and related facilities of mine.     

Study on Strength Influence Mechanism of Fiber-Reinforced Expansive Soil Using Jute

This study was undertaken to research the effects of jute fiber content, fiber length, water content and dry density of reinforced and unreinforced soil on the strength influence mechanism by implementing a series of laboratory tests and analysis. The most efficient fiber reinforcement effects was achieved by means of adding jute fiber with content of 0.6 % and length of 6 mm into expansive soil specimen prepared at maximum dry density and optimum moisture content. The cohesion of reinforced specimens increased first with increasing fiber content and fiber length and then decreased with further increase in fiber content and fiber length. The internal friction angle of reinforced specimens were not affected significantly by fiber content and fiber length. Higher water content reduces the fiber reinforcement effects by means of acting as lubricant in the interface of fiber and soil particles. Fiber reinforcement effects is more prominent for specimens prepared at higher dry density by increasing the effective contact area of fiber/soil. The application prospect of soil reinforcement using natural fiber is impeded by the hydrophilic nature and biodegradability of natural fiber, thus, studies on using chemical additive to do surface treatment for natural fiber are needed to improve the interfacial interaction of fiber/soil so as to widen the application of natural fiber.     

进积型三角洲交汇区沉积模式--以东营凹陷沙三中亚段为例

作为碎屑岩储层发育的最主要沉积相类型之一,进积型三角洲在油气勘探领域具有举足轻重的地位;加强对进积型三角洲沉积模式的研究,对于油气储层预测具有重要现实意义。渤海湾盆地东营凹陷古近纪湖盆内发育的东营三角洲和永安三角洲在沙河街组三段中亚段沉积期发生了交汇,而有关两个三角洲的交汇方式、沉积特征及交汇区储层的预测尚未引起足够的重视。以岩芯观测、录井和地震资料为基础,分析了东营凹陷古近系沙三段中亚段三角洲交汇区沉积特征,探讨了沉积期次、交汇过程,建立了三角洲交汇区沉积模式。研究表明,东营凹陷沙河街组三段中亚段主要发育湖泊、进积型三角洲沉积;储集砂体主要形成于三角洲前缘水下分流河道,河口坝微相次之,浊积岩主要分布于深湖区。认为此前界定的东营三角洲的分布范围可能被夸大,而永安三角洲的沉积规模可能被低估。东营凹陷古近系沙三中亚段可划分为9个期次,其作用过程可分为局部交汇阶段和完全交汇阶段。三角洲水下交汇区是水流汇聚和沉积物卸载的有利场所,叠置砂体可成为有利的油气储层,因而具有重要的油气勘探价值。     

Modification of strain wedge method for lateral soil-pile interaction in sandEI北大核心CSCD

A modified strain wedge (SW) method for analyzing the behavior of laterally loaded single piles in sand is proposed. The modified model assumes that the lateral displacements of a pile behind the three-dimensional passive soil wedge are nonlinear, which makes the horizontal soil strain variable with depths instead of a constant value in the original strain wedge model, and also employs two different hyperbolic models, one for describing horizontal stress increment-strain behavior of soil in the wedge, and the other for describing the shear stress-displacement property at the interface between soil and pile shafts. An example is analyzed to demonstrate the effectiveness of the modified method, and a good agreement is obtained. Finally, the effects of modifications on the lateral bearing capacity of pile shafts are discussed. The results show that the problem of overestimating the lateral bearing capacity of piles with strain wedge method can be ameliorated by introducing the assumption of nonlinear lateral displacements of piles. It makes the SW method more convenient and effective in analyzing the behavior of laterally loaded piles by introducing the new relationships of horizontal stress increment-strain and shear stress-displacement.     

底水油层水平井产液剖面均衡性评价

胜利油田开采底水特征高含水油层的水平井数量多,其中油层向水平井非均衡供液现象普遍。为评价此类水平井产液剖面均衡性,量化其生产动态改善潜力,定义了产液剖面基尼系数GN,并结合现场案例介绍其计算方法,随后统计胜利油田60口样本井,分析GN对见水时间tRL和底水突破前累积产油量QRL的影响,最后据此对GN分级。计算和分析结果表明:GN可以整体表征实际非均衡产液剖面偏离理想均衡产液剖面的程度,通常取值0~1之间,数值越大,均衡性越差;划分GN0.1为产液剖面不均衡,其样本井数54口,占比90%,以理想均衡产液状态为基准,tRL和QRL分别至少有100%和69.5%的提升潜力。     

The Moon

Recent geochemical and geophysical data from the Moon enable a revision of earlier interpretations regarding lunar origin, structure and bulk composition. Earth and Moon show many similarities among their isotopic compositions, but they have evolved in totally dissimilar ways, probably related to the deficiency of water and volatile elements in the Moon as well as the vast differences in size and internal pressure. Some global geochemical differences from the Earth such as volatile depletion based on K/U ratios have been established. However, all current lunar samples come from differentiated regions, making the establishment of a bulk composition more reliant on bulk geophysical properties or isotopic similarities; it remains unclear how the latter arose or relate to whole Moon composition. The lack of fractionation effects among the refractory and super-refractory elements indicates that the proto-lunar material seems unlikely to have been vaporized while the presence of volatile elements may place lower limits on proto-lunar temperatures. The apparent lack of geochemical evidence of an impacting body enables other possible impactors, such as comets, to be considered. Although the origin of the Moon remains currently unknown, it is generally believed that the Moon originated as the result of a giant impact on the Earth.     

Quantification of photosynthetic inorganic carbon utilisation via a bidirectional stable carbon isotope tracer

The amount of bicarbonate utilised by plants is usually ignored because of limited measurement methods. Accordingly, this study quantified the photosynthetic assimilation of inorganic carbon (CO₂ and HCO₃ ^?) by plants. The net photosynthetic CO₂ assimilation (P _N), the photosynthetic assimilation of CO₂ and bicarbonate (P _N’), the proportion of increased leaf area (f _LA) and the stable carbon isotope composition (δ¹³C) of Orychophragmus violaceus (Ov) and Brassica juncea (Bj) under three bicarbonate levels (5, 10 and 15 mm NaHCO₃) were examined to determine the relationship among P _N, P _N’ and f _LA. P _N’, not P _N, changed synchronously with f _LA. Moreover, the proportions of exogenous bicarbonate and total bicarbonate (including exogenous bicarbonate and dissolved CO₂-generated bicarbonate) utilised by Ov were 2.27 % and 5.28 % at 5 mm bicarbonate, 7.06 % and 13.28 % at 10 mm bicarbonate, and 8.55 % and 17.31 % at 15 mm bicarbonate, respectively. Meanwhile, the proportions of exogenous bicarbonate and total bicarbonate utilised by Bj were 1.77 % and 3.28 % at 5 mm bicarbonate, 2.11 % and 3.10 % at 10 mm bicarbonate, and 2.36 % and 3.09 % at 15 mm bicarbonate, respectively. Therefore, the dissolved CO₂-generated bicarbonate and exogenous bicarbonate are important sources of inorganic carbon for plants.     

The effect of slight to minor biodegradation on C<Subscript>6</Subscript> to C<Subscript>7</Subscript> light hydrocarbons in crude oils: a case study from Dawanqi Oilfield in the Tarim Basin,NW China

Light hydrocarbons (LHs) are one of the main petroleum fractions in crude oils, and carry much information regarding the genetic origin and alteration of crude oils. But secondary alterations—especially biodegradation—have a significant effect on the composition of LHs in crude oils. Because most of the LHs affected in oils underwent only slight biodegradation (rank 1 on the biodegradation scale), the variation of LHs can be used to describe more the refined features of biodegradation. Here, 23 crude oils from the Dawanqi Oilfield in the Tarim Basin, NW China, eleven of which have been biodegraded to different extents, were analyzed in order to investigate the effect of slight to minor biodegradation on C₆–C₇ LHs. The study results showed that biodegradation resulted in the prior depletion of straight-chained alkanes, followed by branched alkanes. In slight and minor biodegraded oils, such biodegradation scale could not sufficiently affect C₆–C₇ cycloalkanes. For branched C₆–C₇ alkanes, generally, monomethylalkanes are biodegraded earlier than dimethylalkanes and trimethylalkanes, which indicates that branched alkanes are more resistant to biodegradation, with the increase of substituted methyl groups on parent rings. The degree of alkylation is one of the primary controlling factors on the biodegradation of C₆–C₇ LHs. There is a particular case: although 2,2,3-trimethylbutane has a relative higher alkylation degree, 2,2-dimethylpentane is more resistant to biodegradation than 2,2,3-trimethylbutane. 2,2-Dimethylpentane is the most resistant to biodegradation in branched C₆–C₇ alkanes. Furthermore, the 2-methylpentane/3-methylpentane and 2-methylhexane/3-methylhexane ratios decreased steadily with increasing biodegradation, which implies that isomers of bilateral methyl groups are more prone to bacterial attack relative to mid-chain isomers. The position of the alkyls on the carbon skeleton is also one of the critical factors controlling the rate of biodegradation. With increasing biodegradation, Mango’s LH parameters K1 values decrease and K2 values increase, the values of n-heptane and isoheptane decrease, and the indices of methylcyclohexane and cyclohexane increase. LH parameters should be applied cautiously for the biodegraded oils. Because biodegraded samples belong to slight or minor biodegraded oils, the values of n-heptane and isoheptane from Dawanqi Oilfield can better reflect and determine the “Biodegraded” zone. When the heptane value is 0–21 and the isoheptane value is 0–2.6, the crude oil in Dawanqi Oilfield is defined as the “Biodegraded” zone.     

A hydrochemical study of the Hammam Righa geothermal waters in north-central Algeria

This study focuses on the hydrochemical characteristics of 47 water samples collected from thermal and cold springs that emerge from the Hammam Righa geothermal field, located in north-central Algeria. The aquifer that feeds these springs is mainly situated in the deeply fractured Jurassic limestone and dolomite of the Zaccar Mount. Measured discharge temperatures of the cold waters range from 16.0 to 26.5 °C and the hot waters from 32.1 to 68.2 °C. All waters exhibited a near-neutral pH of 6.0–7.6. The thermal waters had a high total dissolved solids (TDS) content of up to 2527 mg/l, while the TDS for cold waters was 659.0–852.0 mg/l. Chemical analyses suggest that two main types of water exist: hot waters in the upflow area of the Ca–Na–SO₄ type (Hammam Righa) and cold waters in the recharge zone of the Ca–Na–HCO₃ type (Zaccar Mount). Reservoir temperatures were estimated using silica geothermometers and fluid/mineral equilibria at 78, 92, and 95 °C for HR4, HR2, and HR1, respectively. Stable isotopic analyses of the δ¹⁸O and δD composition of the waters suggest that the thermal waters of Hammam Righa are of meteoric origin. We conclude that meteoric recharge infiltrates through the fractured dolomitic limestones of the Zaccar Mount and is conductively heated at a depth of 2.1–2.2 km. The hot waters then interact at depth with Triassic evaporites located in the hydrothermal conduit (fault), giving rise to the Ca–Na–SO₄ water type. As they ascend to the surface, the thermal waters mix with shallower Mg-rich groundwater, resulting in waters that plot in the immature water field in the Na–K–Mg diagram. The mixing trend between cold groundwaters from the recharge zone area (Zaccar Mount) and hot waters in the upflow area (Hammam Righa) is apparent via a chloride-enthalpy diagram that shows a mixing ratio of 22.6 < R < 29.2 %. We summarize these results with a geothermal conceptual model of the Hammam Righa geothermal field.     

Improvement of saponification extraction method for fatty acids separation from geological samples

The conventional saponification method could result in lower recoveries and artificial changes of long-chain fatty acids. The main reason is the error judgment of the intermediate layer suspended between the aqueous and organic layer during the liquid–liquid extraction process. This study shows that the intermediate layer consists of lots of medium- to long-chain carboxylic salts for their special physical and chemical properties. An improved saponification extraction method is also developed and the results show that the carboxylic salts distributed in the intermediate layer could be obtained completely, which greatly enhances the authenticity and accuracy of fatty acid analysis. Additionally, the possible reasons of formation of the intermediate layer are also discussed.