Discriminating characters of ore-forming intrusions in the super-large Chalukou porphyry Mo deposit,NE China

The Chalukou porphyry Mo deposit, located in the Great Hinggan Range, is the largest Mo deposit in northeast China, although the age and genesis of the associated magmatic intrusions remain debated.Here we report zircon U-Pb ages and trace elements, whole rock geochemistry and Sre Nd isotope data with a view to understand the relationship between the magmatism and molybdenum mineralization.Zircon U-Pb analysis yield an age of 475 Ma for rhyolite in the older strata, 168 Ma for the premineralization monzogranite, and 154 Ma for the syn-mineralization granite porphyry. The granite porphyry and quartz porphyry are considered as the ore-forming intrusions. These rocks are peraluminous, alkali-calcic, and belong to high-K to shoshonitic series with a strong depletion of Eu. They also display characteristics of I-type granites. The rocks exhibit wide variations of(87 Sr/86 Sr)iin the range of 0.705426 -0.707363, and ε_(Nd)(t) of -3.7 to 0.93. Zircon REE distribution patterns show characteristics between crust and the mantle, implying magma genesis through crust-mantle interaction. The Fe_2O_3/FeO values(average 1) for the whole rock and EuN/Eu*Nvalues(average 0.45), Ce~(4+)/Ce~(3+) values(average 301)for zircon grains from the granite porphyry are higher than those from other lithologies. These features suggest that the ore-forming intrusions(syn-mineralization porphyry) had higher oxygen fugacity conditions than those of the pre-mineralization and post-mineralization rocks. The Chalukou Mo deposit formed in relation to the southward subduction of the Mongol-Okhotsk Ocean. Our study suggests that the subduction-related setting, crust-mantle interaction, and the large-scale magmatic intrusion were favorable factors to generate the super-large Mo deposits in this area.     

华南燕山晚期构造-岩浆事件与成矿作用——来自广西大瑶山龙头山金矿床的地球化学约束

广西贵港大瑶山成矿带位于华南东南沿海成矿带西南端,对矿带内龙头山金矿黄铁矿化斑岩进行定年的结果为96.1±3.0 Ma,与区域内邻近的平天山侵入岩体(96.2±0.4 Ma)相同.龙头山矿床的Sr同位素组成与其锆石的REE特征表明,成矿作用伴随有大量的流体参与;矿化斑岩与区内侵入相岩石相同的形成时代以及矿化斑岩中锆石C...     

福建地区波速比分布特征

选取福建地震台网"十五"观测系统2009—2015年记录的748个M_L≥1.0地震事件,采用多台和达法计算福建区域波速比值和泊松比值,并绘制二者空间等值线图,分析其分布特征,讨论波速比值高低与震级大小和震源深度的关系,结果发现,波速比大小与二者关系不大。     

校正大地电磁测深中静态效应的首枝重合法

着重论述如何用首枝重合法校正静态效应。提出用等权正交多项式拟合视电阻率曲线真实位置；指出了选择参考频率的原则；以及如何自动识别是否有静态效应的影响，产生了何种形式的静位移。分析静校正处理后的资料可知，静态效应影响几乎无所不在，但在盆地沉积中心有可能无静位移情形；静位移的形式是多样的，但主体形式是ρ＿（ＴＥ）曲线向上，ρ＿（ＴＭ）曲线向下位移，且ρ＿（ＴＥ）曲线在ρ＿（ＴＭ）曲线之上；ρ＿（ＴＥ）曲线与ρ＿（ＴＭ）曲线基本上一样容易产生静位移。     

Evaluation of factors influencing the inelastic seismic performance of torsionally asymmetric buildings

This paper addresses some fundamentally contradictory conclusions drawn by Tso and Ying¹ and the authors² regarding the additional seismic ductility demand in asymmetric building structures and the adequacy of certain code torsional provisions. It also clarifies a number of issues arising from the different approaches employed in the two studies. The Mexico 76 and 87 code torsional provisions are taken as examples. Results show that the structural element at the stiff edge is the more critical and that the Mexico 76 code torsional provisions (among others) are inadequate, substantially underestimating the strength demand of this element. On the other hand, the Mexico 87 code torsional provisions are found to be over-conservative. Recommendations are also given for improving the form and effectiveness of these code torsional provisions.     

对饱和粘性土渗透规律的新认识及其应用

通过实验，对饱和粘性土的渗透规律进行研究，得到几点新认识。利用此认识建立了饱和粘性土越流补给量的计算公式，并在实际应用中得到验证。     

多种岩石的Qp,Qs,Qc

本采用脉冲传播谱振幅比法、能量法、尾波法分别测多种岩样的Ｐ波Ｑ值、Ｓ波Ｑ值及尾波Ｑ值。结果表明，能量法所得Ｑｐ、Ｑｓ较小。谱振幅比法所得Ｑｐ一般居中，Ｑｓ较大。尾波Ｑｃ有的偏大，有的偏小。     

宏观地震忽略吸收确定震源深度问题的通解及其精确度

分析G-R-闵公式后得出,它是从点源幅射场导出的,与地震宏观场不相应。因在近场震源不能视作点源。在分析过程中,导出相当于点源、线源或面源以及复杂源的幅射场的深度公式。对实际的地震,它的源类型一无所知,所以不预作假定,将源指标几何扩散率n作为待定参数,导出了一个物理意义明确而又普遍化的震源深度公式。此公式的诸解法中,以计算方法准确、精度高,作图法有直观的优点,但准确性差、精度低,图算法只作获取粗略值和考察数据均匀性用。计算了9个8级以上巨震、1个71/2大震,和两个M_L=3的有感地震的震源深度,经对比结果很好,利用计算得出震源类型,结合宏观场研究了这些地震的震源几何学。并且首次在国际上给出宏观地震震源深度值的标准误差。     

开展职业健康安全管理体系认证提高勘察设计单位的管理水平和市场竞争力(六、七期连载)

（第一部分刊登在2006年第六期） 二、职业健康安全管理体系的核心思想与结构要素 1.管理体系的运行基础 系统化的“戴明模型”,或称为PDCA模型是职业健康安全管理体系的运行基础.按照“戴明模型”,一个企业的经营活动可分为“计划（PLAN）、行动（DO）、检查（CHECK）、改进（ACT）”四个相互联系的环节.